NEC Infoset 408 System Manual
Here you can view all the pages of manual NEC Infoset 408 System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 221
InfoSet 408Issue 1A System Manual3 - 141 Dial pad key 2 has the letters ABC. To search the name or number starting with: A = B = C = 2 = Note: If the user dials five 2’s (22222) the system scrolls back to A. Table 3-4 Speed Dial Search Keys provides a list of dialpad keys used to search speed dial directories, the number of times the dialpad key must be pressed and the result. Lift the handset (if the system has been...
Page 222
Issue 1AInfoSet 408 3 - 142Features Associated Programming All programming functions associated with this feature are listed in the following table. Some functions must be programmed before the feature is operational and other functions are optional. The optional functions can affect how the feature operates. Special Conditions If two different keys are pressed while performing a search, the system only recognizes the last key that was pressed before was pressed. For example, if and are...
Page 223
InfoSet 408Issue 1A System Manual3 - 143 Pressing(SYS or STA) has no affect if speed dial numbers have not been stored in the system. If duplicate names are stored for different speed dial memory locations, the speed dial memory location with the lowest numbered location number is displayed. The system uses the following criteria when displaying both telephone numbers and the associated names. • When both the telephone number and associated name are stored, the name is displayed. • When only the...
Page 224
Issue 1AInfoSet 408 3 - 144Features SPD (InfoSet) or Redial (Electra Elite) Key This feature allows users to press the (on InfoSet telephones) or the(on Electra Elite telephones), to access speed dial memory locations. This feature is available for the InfoSet or Electra Elite telephones. Feature Operation 1. Press (on InfoSet telephones) or(on Electra Elite telephones). 2. Enter the speed dial memory location number. The number that has been programmed for the speed dial memory...
Page 225
InfoSet 408Issue 1A System Manual3 - 145 The (for InfoSet telephones) or(for Electra Elite telephones) keys can also be used for the following features/operations: • Placing pauses between numbers that are stored in speed dial memory locations. • Assigning operations to one-touch/feature access keys. • Setting the automatic redial feature.
Page 226
Issue 1AInfoSet 408 3 - 146Features Specified CO/PBX Line Seizure This feature allows users to seize a specific trunk line by either dialing an access code and the trunk line number. This feature is available for the InfoSet and Electra Elite multiline telephones and single line telephones. Feature Operation 1. Lift the handset or press . 2. Dial . 3. Dial the trunk line number. The trunk line is seized and the user hears dialtone. Associated Programming All programming functions...
Page 227
InfoSet 408Issue 1A System Manual3 - 147 Speed Dial – Extension Each extension in the system can be allowed up to 20 personal speed dial numbers. For personal speed dial numbers to be available, the system must be set to 80 mode in system programming. Selecting 80 mode reserves 20 personal speed dial numbers for each telephone user. This feature is available for InfoSet and Electra Elite multiline telephones and single line telephones. Single line telephones can be used to set up and originate speed...
Page 228
Issue 1AInfoSet 408 3 - 148Features 1. Press (external line key). 2. Press (InfoSet multiline telephones) or (Electra Elite multiline telephones). 3. Dial the speed dial memory location number ( ~ ) where the telephone number is stored. 4. The number is automatically dialed. 1. Lift the handset. 2. Dial . 3. Dial the speed dial memory location number ( ~ ) where the telephone number is stored. 4. The number is automatically...
Page 229
InfoSet 408Issue 1A System Manual3 - 149 1. Lift the handset. 2. Dial . 3. Dial the speed dial memory location number ( ~ ) where the telephone number is stored. 4. Place the handset in the cradle. 1. Press . 2. Press (InfoSet multiline telephones) or (Electra Elite multiline telephones). 3. Dial the speed dial memory location number ( ~ ) where the telephone number is stored. 4. The number is displayed in the telephone LCD. Special...
Page 230
Issue 1AInfoSet 408 3 - 150Features Entering a pause, hookflash or nesting numbers is only available if programming speed dial numbers on multiline telephones (i.e., these are not available when programming speed dial numbers on single line telephones). A maximum of five system and extension (personal) speed dial memory location numbers can be programmed into one speed dial memory location. An external speed dial memory location number can be assigned to a one-touch/ feature access key. System speed...