NEC Gt950 Lcd Projector Users Manual

E – 51
Using the PC Card Viewer function
NOTE: When using the supplied software (CD-ROM1)
The software is designed to use with a personal computer only. Do not play the
software on CD player. Doing so could cause damage to speakers.
Features
The Viewer feature allows slides stored on a PC  memory card (re-
ferred to as PC card in this manual) to be displayed on the projector.
Even if no computer is available, presentations can be conducted sim-
ply with the projector.  This feature is convenient for...

E – 52
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
•If Windows is already started, exit all applications.  Installation may
not be performed properly if any applications are running.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the "Cancel" button
then follow the instructions in the dialog box.
1. Start up Windows.
2. Insert the CD-ROM into the...

E – 53
Operating the PC Card Viewer Function
from the Projector (playback)
This section describes the operation for showing slides of presentation
documents created using the PC Card Viewer function with the projec-
tor.
It is also possible to make slides directly from the images projected
with the projector.
Projecting slides
1.  Insert a PC card into the  card slot.
Insert the PC card with the side with the insertion direction arrow
on the top.
 *  Press the eject button to eject the card.
2.  Select...

E – 54
SLIDE
When the tool bar is not displayed:
Press the FOLDER LIST button on the remote control to display fold-
ers from a PC card in the projector’s PC Card slot.
Use the SLIDE +/- button to
advance to the next  folder or
return to the previous folder.
Folder
02 : 0001 / 0008Folder Folder Folder
Folder
SlideSlide Slide Slide
Slide
SlideSlideSlide
02 : 0004 / 0008
Slide
Slide(Table) cursor (green marks)
Use the SLIDE +/- button to
advance to the next slide or re-
turn to the previous slide.
Auto...

E – 55
Capturing Images Displayed on the Projector
Storing images displayed on the projector on the PC card
Preparations:
Insert the PC card into the card slot.
Insert the PC card with the side with the insertion direction arrow on
the top.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the “Capture” from the Tools menu.
3. A tool bar will appear.
The tool bar includes the following buttons:
Drag ............. Drags to move the tool bar (for...

E – 56
Uninstalling the PC Card Viewer Software
Even if you do now know the PC Card Viewer software's file names or
where they are stored, the PC Card Viewer software files can be easily
removed from the system using the "Install/Uninstall Applications" con-
trol panel in Windows.  (Normally there is no need to perform this op-
eration.)
Uninstalling the software
Use the procedure described below to uninstall the PC Card Viewer
software files.
1. From the Start menu, select Settings then...

E – 57
Terminology
PC card
ATA card
CompactFlash
TYPE (I, II and III)
BMP
JPEGThis is the name of a card currently being standardized by the Japan Electronic Industry Association (JEIDA) and PCMCIA
(Personal Computer Memory Card Interface Association) of the United States.
A type of PC card.  ATA was originally a type of interface between computers and fixed disk devices.  The ATA card is a standard
card-type recording medium.
CompactFlash card is a small removable card conforming to ATA specifications....

E – 58
This section describes the simple maintenance procedures you should
follow to replace the lamp and clean the filter.
Replacing the Lamp
After your lamp has been operating for 1500 hours (2000 hours : Eco
mode) or longer, the “Status” light in the cabinet will go on and the
message will appear. Even though the lamp may still be working, re-
place it at 1500 (2000 hours : Eco mode) hours to maintain optimal
projector performance.
CAUTION
•DO NOT TOUCH THE LAMP immediately after it has been used. It...

E – 59
Cleaning or Replacing the Filters
The air-filter sponge keeps the inside of the GT950 Projector free from
dust or dirt and should be cleaned after every 100 hours of operation
(more often in dusty conditions). If the filter is dirty or clogged, your
projector may overheat.
CAUTION
•Turn off the power and unplug the projector before replacing the filter.
•Only clean the outside of the filter cover with a vacuum cleaner.
•Do not attempt to operate the projector without a filter cover.
•Your...

E – 60
5. TROUBLESHOOTING
This section helps you resolve problems you may encounter while setting up or using the projector.
Standby
Cooling down
Lamp in Normal mode
Lamp in Eco mode
3 minutes after lamp is turned on in
Eco mode
Lamp has reached its end of life
(Normal: 1500 hours or over)
(Eco: 2000 hours or over)
Lamp life has reached its end of life
(Normal: 1600 hours or over)
(Eco: 2100 hours or over)
Lamp or filter cover error (3 locations)
Temperature error
Fan error
Lamp error
Power/ Status Light...