NEC Gt950 Lcd Projector Users Manual

E – 31
Source display
Each time the Source button is pressed, the input source will change
as follows:
→ RGB → Video → S-Video → DVI (DIGITAL) 
PC Card Viewer ← DVI (ANALOG) ←
If no input signal is present, the input will be skipped.
Press the Auto Adjust button to fine-tune the computer image or to
remove any vertical banding that might appear and to reduce video
noise, dot interference or cross talk (this is evident when part of your
image appears to be shimmering). This function adjusts the clock...

E – 32
Volume control:
Sound level from the speaker and AUDIO OUTPUT mini jack on the
projector can be adjusted.
Sound is not available when PC Card Viewer is selected.
increase volume
Volume bar
decrease volume
Turning off picture and sound:
Press the Picture Mute button to turn off the image and sound for a
short period of time. Press again to restore the image and sound.
Getting Help about how to operate the projector:
You get the contents about Help.
Display Help
Exit Help
Using Pointer
You can use...

E – 33
4. Return the image to the original size.
Correcting Keystone distortion
Press (+) or (-) to correct keystone (trapezoidal) distortion to make the
top or bottom of the screen longer or shorter so that the projected
image is rectangular.
NOTE: The maximum keystone angle that can be corrected is 30 degrees up-
ward and 30 degrees downward with the projector placed horizontally on the
ground plane.
Depending on the type of graphics being used, the picture may get blurred or
keystone correction may...

E – 34
3. In order for the changes to take effect, use the  or  button on
the remote control or the projector cabinet to highlight “OK”,
then press the Enter button. To cancel the changes, use the 
 or
 buttons to highlight “Cancel” and press the “Enter” button.
To return to the factory default, select “Reset” then press the “En-
ter” button.
The default Basic/Custom Menu items are:
Source Select [RGB, Video, S-Video, DVI (DIGITAL/ANALOG) and
PC Card Viewer], Picture, Volume, Image Options (Keystone,...

E – 35
Menu Tree
Advanced Menu
Source Select
Picture
Volume
Image Options
Color Management
Projector Options
Tools
HelpRGB
Video
S-Video
DVI (DIGITAL)
DVI (ANALOG)
PC Card Viewer
more
RGB (Video)
RGB (S-Video)
Brightness / Contrast / Color / Hue / Sharpness
Volume
Normal / Eco
All Data / Current Signal Aspect Ratio
Noise Reduction
Position / Clock
Resolution
Video Filter
Overscan
Input Signal (1.33:1 / 1.78:1 / 1.85:1 / 2.35:1)
Display Area (1.33:1 / 1.78:1 / 1.85:1 / 2.35:1)
Off / Low / Medium / High...

E – 36
Advanced Menu
Source Select
Picture
Volume
Image Options
Color Management
Projector Options
Tools
Help
Contents
Information
Capture
PC Card Files
ChalkBoard
Shift (Adjustment), Speed (Normal / Fine), Zero Position
Contents
Page 1
Page 2
Page 3
Page 4Source Name / Input Terminal / Entry No. / Horizontal Frequency /
Vertical Frequency / Sync Polarity
Signal Type / Video Type / Sync Type / Interlace
Remaining Lamp Time / Lamp Hour Meter / Filter Usage / Projector Usage
Version (BIOS / Firmware / Data...

E – 37
Menu windows or dialog boxes typically have the following elements:
Title bar: Indicates the menu title.
Highlight: Indicates the selected menu or item.
Solid triangle: Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab: Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button: Use this round button to select an option in a dialog box.
Check box: Place a checkmark in the square box to turn the...

E – 38
DragPrev Play Jump Setup View
Next Stop Select Delete
PC Card ViewerThis feature enables you to make presentations using a PC card that contains
captured images and slides created with the exclusive PC Card Viewer Utility
contained in the CD-ROM1. See page E-52 for installing the PC Card Viewer
Utility. The starting screen for the PC Card Viewer varies depending on the
settings of the Setup's Page 2. See Setup on page E-44.
NOTE: Even if you switch the current PC Card Viewer source to another...

E – 39
Picture (not available for PC Card Viewer)
Volume (not available for PC Card Viewer)
Provides access to controls for your image. Use 
 buttons on the
projector cabinet or the remote control to highlight the menu for the
item you want to adjust.
Brightness ... Adjusts the brightness level or the back raster intensity.
Contrast ....... Adjusts the intensity of the image according to the incoming
signal.
Color ............ Increases or decreases the color saturation level (not valid
for RGB).
Hue...

E – 40
Aspect Ratio (not available for RGB, DVI digital and PC Card Viewer)
You can select the aspect ratio for input signal and display area re-
spectively.
Select the appropriate aspect ratio using the Select 
, , 
, or 
button.
NOTE: When Resolution is set to Native, this feature is not available, and the
stored settings and adjustments are invalid.
The screen size (width-to-height) is set for input signal and display area re-
spectively.
In Portrait mode, the screen size means height-to-width....