NEC Gt950 Lcd Projector Users Manual

E – 41
Factory Default
Changes all adjustments and setting to the factory preset for each
source individually except Remaining Lamp Time, Lamp Hour Meter,
Filter Usage, Projector Usage, Language, Communication Speed and
Passcode. (To reset the lamp usage time, see "Clear Lamp Hour Meter"
on page E-45.)
All Data ............... Reset all the adjustments and settings for all the signals
to the factory preset.
Current Signal ..... Resets the adjustments for the current signal to the fac-
tory preset...

E – 42
Allows you to set preferences for the on-screen menu.
Press “OK” to save your changes for all the features of page 1 and
page 2.
[Page 1]
Menu Mode:
This feature allows you to select two menu modes: Advanced Menu
and Basic/Custom Menu.
* When a passcode is set for your projector, changing the menu from Basic
to Advanced will display the Passcode input screen. See page E-48 for
more information.
Advanced Menu ..........This is the menu that contains all the available menus
and commands....

E – 43
Menu Display Time :
This option allows you to select how long the projector waits after
the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and
"Auto 45 sec". The "Auto 45 sec" is the factory preset.
Manual ......... The menu can be turned off manually.
Auto 5 sec .... The menu will automatically be turned off in 5 seconds if no
buttons are pressed within 5 seconds.
Auto  15  sec .. The menu will...

E – 44
Show Folder List:
If this option is checked, when PC Card Viewer input is selected on
the projector, the folder lists will be displayed and allows you to
select the presentation from a PC card.
Auto Play:
If this option is checked, any given slide will start to play automati-
cally.
Auto Play Interval:
You can specify interval time between 5 and 300 seconds.
NOTE: The Auto Play Interval time set on the PC Card Viewer Utility over-rides the one set here.
Manual Play:
Views a slide manually when PC...

E – 45
[Page5] Clear Lamp Hour Meter:
Resets the lamp clock back to zero. Pressing this button appears a
confirmation dialog box. To reset the lamp usage hour, press "OK".
NOTE: The projector will turn off and go into standby mode after 1600 hours
(up to 2100 hours in Eco mode) of service. If this happens, press the Help
button on the remote control for ten seconds to reset the lamp clock back
to zero. Do this only after replacing the lamp.
Clear Filter Usage:
Resets the filter usage back to...

E – 46
[Page6]
Communication Speed:
This feature sets the baud rate of the PC Control port (Mini DIN 8
Pin).
It supports data rates from 4800 to 38400 bps.
The default is 38400 bps. Select the appropriate baud rate for your
equipment to be connected.
Default Source Select:
You can set the projector to default to any one of its inputs each
time the projector is turned on.
Last .............. Sets the projector to default to the previous or last active
input each time the projector is turned on.
Auto...

E – 47
Lens
After setting Shift, Speed, and Zero Position, select [OK] and press the
ENTER button.
To cancel, select [Cancel] and press the ENTER button.
Shift:
This option adjusts the image position.
Pressing the Adjustment button displays the Lens Shift adjustment
screen.
Use the Select buttons (, , 
,  ) to shift the image horizontally,
vertically, or diagonally.
To move the image diagonally, use two Select buttons simulta-
neously.
Example: To move the image in the upper right-hand corner of the...

E – 48
Drag
Freeze
Exit
Capture Passcode
A passcode can be set for your projector to avoid operation by an un-
authorized user using the Advanced Menu. When a passcode is set,
changing the menu from Basic to Advanced will display the Passcode
input screen.
To register your passcode:
1. Select [Entry] and press the ENTER button. The [Entry] screen will
be displayed.
2. Type in a 4-digit combination of Select buttons (, , 
,  ) and
press the ENTER button.
The [Confirm Passcode] screen will be...

E – 49
Drag
ReturnClose
PC Card Files:
Displays a list of all the files stored in the PC card so that you can
select a file you want to display. You can also sort files by file name
or date, or display the file.
Although a list of all the files in the PC card is displayed, you can
view files in idx, text, HTML, JPEG and BMP format only.
Selecting BMP and JPEG files automatically switches to the PC
Card Viewer  source.
NOTE: When an image with a resolution of XGA (1024
768) or higher isprojected, the PC...

E – 50Help
[Page 1]
Source Name
Input Terminal
Entry No.
Horizontal Frequency
Vertical Frequency
Sync Polarity
[Page 2]
Signal Type
Video Type
Sync Type
Interlace
Drag
PenEraser View
Exit
Clear Color
ChalkBoard: (available only when using with USB mouse)
Provides the tool bar for producing freehand drawings.
Drag ............. Drags to move the tool bar. (for USB mouse operation only)
Pen .............. Left-click and drag to draw. Left-click [
] or right-click the
pen icon to display the pen palette...