NEC Gt950 Lcd Projector Users Manual

E – 1
GT950
LCD Projector
User’s Manual
English
SOURCE
SELECT
LENS SHIFTFOCUS
ZOOM STATUS
POW
ER
ON/STAND BY AUTO
ADJUSTMENU
ENTERCANCEL 

E – 2
IMPORTANT INFORMATION
Precautions
Please read this manual carefully before using your NEC GT950 Pro-
jector and keep the manual handy for future reference.
Your serial number is located under the name plate label on the left
side of your GT950. Record it here:
CAUTION
To turn off main power, be sure to remove the plug from
power outlet.
The power outlet socket should be installed as near to
the equipment as possible, and should be easily acces-
sible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE...

E – 3
Important Safeguards
These safety instructions are to ensure the long life of your projector
and to prevent fire and shock. Please read them carefully and heed all
warnings.
Installation
1. For best results, use your projector in a darkened room.
2. Place the projector on a flat, level surface in a dry area away from
dust and moisture.
Vertical angle of installation must be between -10° and +10° when
displaying an image.
Placing the projector outside of this range of angles may cause ex-
cess heat...

E – 4
TABLE OF CONTENTS
1. INTRODUCTIONIntroduction to the GT950 Projector ............................................. E-5
Getting Star ted ............................................................................. E-5
What's in the Box ......................................................................... E-6
Getting to Know Your GT950 Projector ........................................ E-7
Front / Side Features ............................................................. E-7
Rear / Side...

E – 5
1. INTRODUCTION
Introduction to the GT950 Projector
This section introduces you to your new GT950 Projector and describes
the features and controls.
Congratulations on Your Purchase of The GT950
Projector
The GT950 is one of the very best projectors available today. The GT950
enables you to project precise images up to 300 inches across (mea-
sured diagonally) from your PC or Macintosh computer (desktop or
notebook), VCR, DVD player, document camera, a laser disc player or
PC Card Viewer.
You can...

E – 7
S
O
U
R
C
E
S
E
L
E
C
T
LENS SHIFT
F
O
C
U
SZ
O
O
M S
T
A
T
U
S
P
O
W
E
R
O
N
/S
T
A
N
D
 B
Y A
U
T
O
A
D
J
U
S
T
MENUENTERCANCEL
SOURCE
SELECT
L
E
N
S
 S
H
IF
TFOCUS
ZOOM STATUS
POWER
ON/STAND BY AUTO
ADJUST
MENU
ENTERCANCEL
Getting to Know Your GT950 Projector
Remote Sensor
Air-Filter
Lens hood cap Lens
Ventilation
(outlet)
Carrying Handle Slot for Kensington Micro
saver Security SystemControls
Remote Sensor
Front/Side Features
Remote Sensor Lamp CoverAir-Filter
Stand attachment portion 

E – 8
SOURCE
SELECT
LENS SHIFT
FO
CUSZO
OM STATU
S
PO
W
ER
O
N/STAN
D BY AU
TO
ADJUST
MENUENTERCANCEL
A
U
D
IO
 IN
A
U
D
IO
 IN
A
U
D
IO
 O
U
A
U
D
IO
 
O
U
T
DVI-I IN
RGB IN
RGB OUT
PC CONTROL
MOUSE
OUTPUT
REMOTE
CONTROL
INPUTAUDIO IN
AUDIO INR
L/
MONOVIDEO
S-VIDEO
A
C
 IN
Rear/Side Features
AC Input
Connect the supplied power cable’s three-
pin plug here.
Terminal PanelPC Card Slot USB (Mouse) Terminal
Foot Built-In Stereo Speaker (2W)Remote Sensor
Built-In Stereo Speaker (2W) Remote Sensor
Attaching...

E – 9
Carrying handle
Carrying the Projector
Always carry your projector by the handle. Ensure that the power cable
and any other cables connecting to video sources are disconnected
before moving the projector.
When moving the projector or when it is not in use, cover the lens with
the lens hood cap.
The lens mechanism consists of precision parts. Be sure to mount the
included lens protection spacers to the lens unit when shipping or
moving the GT950.
1. Returning the Lens Shift to Center
If the lens...

E – 10
A
B
D
SOURCE
RIGHT
LEFT
SELECT
LENS SHIFTFOCUSUP
DOWNZOOM STATUS
POWER
ON/STAND BY AUTO
ADJUST
MENU
ENTERCANCEL
Setting the Projector for Vertical Placement
This projector has a portrait function that supports the portrait display
setting of a personal computer.
Pivot® software included in the supplied CD-ROM2
If the personal computer does not have a driver
for portrait display, install the dedicated driver
from the supplied CD-ROM2. See the manual
supplied with the CD-ROM2 for details.
Pivot® and...