NEC Electra 616 General Installation Manual

3) Ringing Assigment 
--place programming overlay (if available) on 
station keyset 1 
depress -1 key 
(or “MENLJ RFAD CXJ’F m on 
overlay) 
--depress 
--depress 
-depress 
--depress /m key (or EXIT a on overiay) 
[SPDI key (or 
q on overlay) 
]Mlcl key (or PJ%m on overlay) 
desired station select key (1 -16) to 
be programed 
--depress desired line key(s) (i -6) to ring at 
selected station 
--repeat last two steps for each station beir-!g 
programed 
--depress [CPJ/OFFj key (or EXIT 
q on overlay) 
4)...

--place programming overlay 
(if avail&le) on 
station keyset 1 
--depress 
overlay) 
--depress 
--depress 
--depress 
--depress 
JTKEWCR[ key (or MENU REFD OUT a on 
JON/OFF1 key (or 
EXIT a on overlay) 
m key (or 3 on overlay) 
m key (or RESTRICT on overlay) 
desired station select key (l- 16) to 
be progranmzd 
--depress desired line key(s) (lr-, 6) to be restricted 
at selected station - 
see note abve for LED status 
irdication of the various restriction states 
--repeat last two steps for each...

320 Menu Progranxting From Any Keyset 
la) Prime Line Assignment - With Key Telephone Idle 
--depress -1 key 
--display shows B 
--record tone is heard over speaker 
--depress desired cO/PE!X line key 
--display shows chosen CD/M/line iL;1 
wi.th*=ld6 
--record tone stops 
--depress 1-i key 
--display goes off 
lb) Cancelling Prime Line Assignment - With Key Telephone Idle 
--depress w[ key 
--display shows @ 
--record tone is heard over speaker 
--depress )m key 
--display shows ]nL1 for 3 seconds...

2a) H&s-Free Telephone Assigrnnent - With Hands-Free Telephone 
Idle 
--depress m key 
--display shows m 
--record tone is heard over speaker 
--depress 1-1 key 
--display shows m for 3 seconds 
--record tone stops 
2b) Cancelling Hanls-Free Telephone Assignment 
--depress 6-1 key 
--display shows a 
--record tone is heard over speaker 
--depress r-1 key 
--display shows @ for 3 seconds 
--record tone stops 
3a) Off Hook Rirqing Assignment - With Key Telephone Idle 
--depress rSPD PEG1 key 
--display...

. 
/ 
3b) Cancelling Off Hcmk Ringing Assigrment - With Key Telephone 
Idle 
--depress IpRo key 
--display shows B 
--record tone is heard over speaker 
--depress 
[PPGEIJ key 
--display shows m for 3 secords 
--record tone stops 
- 17 -  

400 K>kJTooPERAlT 
/ 
Group Call-Pick-Up - With Key Telephone Off-Hook 
--depress 
--display 
--depress 
--display 
Call Back I&quest 
l-up1 key 
shows IupJ 
m key 
shows called station number m 
Upon receiving no answer (or busy indication at 
called station: 
--depress a 
--display shows 
message denied) 
a for message sent (or /TJ for 
N(Y.L’iZ: Each keyset can receive up to tw ‘ 
call 
back requests. Display showing @ 
indicates there are already txo call back 
requests for the called station. 
I...

--establish comication with a CI/pBX line 
--depress /ADD/ON1 key 
--CD/PBX line key LED shows hold indication 
--establish communication with second CD/PBX line 
--depress [ADD/ON{ key 
--both m/PBx line keys arkd [ADD/ON{ key LED 
indicators light steadily (the two O~/?BX lines 
ard the station are in confereme) 
If station desires to leave conference while maintaining 
the two CD/FBX lines in tandem conference: 
--depress rwl key andgo on-hook 
--LADD/oNL key irdicator flashes, both CD/PBX iine...

/’ --1ADn/crJ7 indicator flashes, both C$&EIX line 
irdicators light 
steady, 
tandem conference 
continues 
NUIE: Approximately 3 minutes into the 1 
tandem conference, an audible time reminder 
is provided and the I-1 key indicator 
starts fluttering. Thereafter, every 3 
minutes the tone reminder will be heard until 
the tandem conference is re-entered and 
terminated.  

330 Job Specifications 
330.1 Instructions for Completing Job Specification 
1. 
2. 
3. The fist page contains items A - C and 1 - 5. These 
have been provided as a convenience and do not affect 
programming. 
Item 6 is COjPBX Assignments. Much of this table is 
also provided as a convenience. Two sections, REFER- 
ENCE NUMBER and PFROGRAMMING DATA, are 
used in programming. 
9 
c> 
REFERENCE NUMBER is the number the CO/ 
PBX line will be referred to in programming 
material. 
PBXLINE refers to the...