NEC Applications Manager Installation Manual

NDA-30025   Revision 4.0Page 25
APM System Installation Manual SCO UNIX SYSTEM V INSTALLATION
SCSI Adapter 
DeviceInstalling a SCSI adapter device may require custom or installpkg. 
Note:
This is an example of the 7800 SCSI adapter using the installpkg
 command.
1. At the “#” prompt, type installpkg and press Enter.
2. Insert the SCSI Device Driver Floppy Disk (7800 Family Manager for SCO 
UNIX) and press Enter.
If the program installation requires more than one floppy disk, be sure to insert 
the disks...

Page 26NDA-30025   Revision 4.0
SCO UNIX SYSTEM V INSTALLATION APM System Installation Manual
3. Select the tape drive you want to install and press Enter. (In this example, type 
4 and press Enter.)
The following menu appears:
4. Select the appropriate drive (e.g., 1), and press Enter.
5. At the “Do you wish to configure the SCSI Cartridge Tape Drive now? (y/n)” 
prompt, type y and press Enter.
6. Enter the prefix of the SCSI host adapter by typing alad and pressing Enter.
7. At the “Which ‘alad’ SCSI...

NDA-30025   Revision 4.0Page 27
APM System Installation Manual SCO UNIX SYSTEM V INSTALLATION
3C509 Ethernet 
DeviceUse the following steps to install an ethernet driver for the 3C509 ethernet board.
1. At the “#” prompt, type custom and press Enter.
The following menu displays:
2. Select the Install option using the arrow keys and press Enter. (Install is 
highlighted when it is selected.)
The following menu displays:
3ecd_]
C3? E>9H CicdU] F ?`UbQdY^W CicdU]
9^cdQ\\BU]_fU Ug @b_TeSd
C3? E>9H CicdU] F...

Page 28NDA-30025   Revision 4.0
SCO UNIX SYSTEM V INSTALLATION APM System Installation Manual
3. Select A New Product using the arrow keys and press Enter.
The following menu appears:
4. Select Entire Product using the arrow keys and press Enter.
5. At the prompt, insert the 3C509 Ethernet III Driver Floppy diskette and press 
Enter.
6. Press Enter at the prompt to continue the installation.
7. After the installation is complete, press Enter to continue.
9^cdQ\\ /GUT^UcTQi ?Sd_RUb ) !))& #*#) 9^cdQ\\...

NDA-30025   Revision 4.0Page 29
APM System Installation Manual SCO UNIX SYSTEM V INSTALLATION
TCP/IP Runtime 
SystemUse the following steps to install the TCP/IP Runtime System.
1. At the “#” prompt, type custom and press Enter.
The following menu displays:
2. Select the Install option using the arrow keys and press Enter. (Install is 
highlighted when it is selected.)
The following menu displays:
3ecd_]
C3? E>9H CicdU] F ?`UbQdY^W CicdU]
9^cdQ\\BU]_fU Ug @b_TeSd
C3? E>9H CicdU] F ?`UbQdY^W CicdU] 

Page 30NDA-30025   Revision 4.0
SCO UNIX SYSTEM V INSTALLATION APM System Installation Manual
3. Select A New Product using the arrow keys and press Enter.
The following menu appears:
4. Select Entire Product using the arrow keys and press Enter.
5. At the prompt, insert the SCO TCP/IP Runtime Floppy Disk Volume 1 diskette 
and press Enter.
6. Press Enter at the prompt to continue the installation.
7. Continue this process, inserting the appropriate diskettes when prompted.
8. When prompted, use the...

NDA-30025   Revision 4.0Page 31
APM System Installation Manual SCO UNIX SYSTEM V INSTALLATION
LLI DriversUse the following steps to install the LLI Drivers which are needed to configure 
network drivers into the kernel.
1. At the “#” prompt, type custom and press Enter.
The following menu displays:
2. Select the Install option using the arrow keys and press Enter. (Install is 
highlighted when it is selected.)
The following menu displays:
3ecd_]
C3? E>9H CicdU] F ?`UbQdY^W CicdU]
9^cdQ\\BU]_fU Ug...

Page 32NDA-30025   Revision 4.0
SCO UNIX SYSTEM V INSTALLATION APM System Installation Manual
3. Select A New Product using the arrow keys and press Enter.
The following menu appears:
4. Select Entire Product using the arrow keys and press Enter.
5. At the prompt, insert the SCO LLI Floppy Disk Volume 1 diskette and press 
Enter.
6. Press Enter at the prompt to continue the installation.
7. When the installation is complete, press Enter to continue.
8. Using the arrow keys, select Quit and press Enter....

NDA-30025   Revision 4.0Page 33
APM System Installation Manual SCO UNIX SYSTEM V INSTALLATION
Network 
ConfigurationAt this point, you need to configure the TCP/IP.
1. At the “#” prompt, type netconfig and press Enter.
The following screen displays:
2. Type 1 and press Enter.
3. Select the top level of the chain to add and press Enter.
4. Select the next level of chain to add and press Enter.
5. Confirm your selection by typing y and pressing Enter.
Note:
The setup procedure for the 3Com EtherLink III...

Page 34NDA-30025   Revision 4.0
SCO UNIX SYSTEM V INSTALLATION APM System Installation Manual
9. At the “How many additional pseduo ttys you want to be created” prompt, press 
Enter.
10. To exit the TCP Connections menu, type q and press Enter.
11. To exit the chain menu, type q and press Enter.
12. The system prompts you to relink the kernel. If there are no other drivers to be 
installed, type y and Enter to relink the kernel now. If there are other drivers to 
be installed (i.e. SunRiver Driver), type...