NEC Applications Manager Installation Manual

APM SYSTEM
Installation  Manual
NEC America, Inc.
NDA-30025-004
Revision 4.0
April, 1998
Stock # 241737 

LIABILITY DISCLAIMER
NEC America reserves the right to change the specifications,  functions, 
or features in this document at any time without notice.  NEC America 
has prepared this document for use by its employees and customers.  The 
information contained herein is the property of NEC  America and shall 
not be reproduced without prior written approval from NEC America.
Copyright 1997
NEC America, Inc. 

NDA-30025  Revision 4.0Page i
APM System Installation Manual CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Typical UAP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Sequential Step-by-Step Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Sequential...

Page iiNDA-30025  Revision 4.0
CONTENTS APM System Installation Manual
This Page Left Blank. 

NDA-30025  Revision 4.0Page iii
APM System Installation Manual FIGURES
LIST OF FIGURES
Figure TitlePage
1-1 Open Application Interface (OAI) Architecture  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
1-2 Sequential Installation Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
1-3 System Configuration Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
3-1 Initial SCO UNIX Boot Prompt. . . . . ....

Page ivNDA-30025  Revision 4.0
FIGURES APM System Installation Manual
This Page Left Blank. 

NDA-30025   Revision 4.0Page 1
APM System Installation Manual INTRODUCTION
Chapter 1 INTRODUCTION
The Open Application Interface (OAI) physical architecture provides a link 
between the NEC NEAX 2400 switching family and one or more general purpose 
computers. The general purpose computer, or User Application Processor (UAP) 
as it is referred to throughout this manual, provides a powerful processing platform 
for the introduction of new switching features via an Ethernet communication link. 
Figure 1-1...

Page 2NDA-30025   Revision 4.0
INTRODUCTION APM System Installation Manual
This profile of a typical UAP serves as a base of reference for the process of 
installing the required hardware and software. Any deviation from this system 
profile or the software associated to it in this manual may result in the need to adapt 
the instructions provided in this manual. It is important to ensure that the 
components chosen for installation are supported with manufacturer 
documentation and software drivers that...

NDA-30025   Revision 4.0Page 3
APM System Installation Manual INTRODUCTION
Sequential Organization of Manual
The chapters in this manual correspond to this sequence of steps.
1.Introduction — This chapter introduces the basic OAI/APM architecture, the 
requirements of a typical-UAP system, the step-by-step and sequential 
installation process described in this manual, and useful information on how 
this manual should be used to assist in the installation process.
2.Baseline System — This chapter...

Page 4NDA-30025   Revision 4.0
INTRODUCTION APM System Installation Manual
Use of Figures and Typefaces
Throughout this document, figures are used to show actual UAP display sequences, 
including prompts and user input at those prompts. System-supplied data in these 
figures is typically represented in plain typeface whereas user-supplied data is 
represented in boldface type. Wherever user input is variable (i.e., what is shown 
is only an example), mention is made of that fact in the narrative...