Namco Wangan Midnight Operators Manual

Page 51 6-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the Monitor.
The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button. To return to the Monitor Test Menu from a test pattern press the
Enter button.
3. Select “EXIT” and press the Enter button to return to the menu screen.
(a) Displays a colour gradation pattern.
(b) Displays a crosshatch pattern for the CRT monitor.
(c) Displays a crosshatch pattern...

Page 52 6-5 Sound Test
1. Select “SOUND TEST” on the menu screen to test the audio and adjust the
volume settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode
5. Select “EXIT” and press the Enter button to return to the menu screen.
(a) GAME
This sets the volume level of the sound during the Game Mode.
[0 ~15, DEFAULT =...

Page 53 6-6 ADS Data (Bookkeeping)
1. Select “ADS DATA” from the menu screen to view the bookkeeping details.
The following screen is displayed.
6-6-1 ADS Page 1
 ADS DATA 1/4
 
POWER ON TIME  5:14 50  (a)
TOTAL PLAY  x:xx xx  (b)
AVE. PLAY TIME  x:xx xx  (c)
PLAY COUNT  xx  (d)
CONTINUE COUNT  xx  (e)
TOTAL COIN  xx  (f)
TOTAL SERVICE  xx  (g)
 NEXT PAGE  (h)
  ADS DATA INITIALIZE  (i)
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a) Displays the total time, (in hours, mins, secs), the game has been...

Page 54 6-6-2 ADS Page 2
 MODE RATIO 2/4
 
SCENARIO 100.0%  (a)
VERSUS 0.0%  (b)
TIME ATTACK  0.0%  (c)
   SCENARIO
AVE. PLAY TIME  H : M SEC  (d)
SHORTEST PLAY TIME  H : M SEC  (e)
LONGEST PLAY TIME  H : M SEC  (f)
PLAY COUNT  xx  (g)
CONTINUE COUNT  xx  (h)
FINISH COUNT  xx  (i)
 NEXT PAGE
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a-c) Displays the percentage between Versus (Linked game) and Time Attack
(single player) games played.
(d) Displays the average time of all games, (in hours, mins,...

Page 55 6-6-3 ADS Page 3
 VERSUS 3/4
 
AVE.PLAY TIME  H : M SEC  (a)
PLAY COUNT  xx  (b)
   TIME ATTACK   
AVE PLAY TIME  H : M SEC  (c)
SHORTEST PLAY TIME  H : M SEC  (d)
LONGEST PLAY TIME  H : M SEC  (e)
PLAY COUNT  xx  (f)
CONTINUE COUNT  xx  (g)
 NEXT PAGE
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a) Displays the average game time, (in hours, mins, secs), of the versus (2
player) games.
(b) Displays the total number of Versus (2 player) games played.
(c) Displays the average game time, (in...

Page 56 6-6-4 ADS Page 4
 ADS DATA 4/4
NISSAN 100%
 BRN34  50%  BCNR33  0%
 BRN32  50%  S15  0%
 S30  0%
TOYOTA
 JZA80  0%  SW20  0%
MAZDA
 FD35  0%  FC3S  0%
MITSUBISHI
 CT9A  0%  CP9A  0%
SUBARU
GDB 0%  GC8  0
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
This page displays the percentage that each available car has been
selected for game play. 

Page 57
6-7 Others
1. Select “OTHERS” on the menu screen. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the\
 Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een.
(a) Displays game software version.
(b) Displays the current time of the internal clock. (the time cannot be re\
set).
(c) Displays the Serial Number of the Game Software.
(d) Sets the Speedometer reading displayed on the screen. When US is...

Page 58 6-7-1 CDVD Check
1. Select “CDVD Check” on the OTHERS Menu screen. The following screen is
displayed.
2. Select “EXIT” to return to the OTHERS Menu Screen.
 DRIVE CHECK
INITIALIZE OK
MEDIA  SYSTEM 246 CD
STAND-BY CHECK  OK
SEEK CHECK  0K
READ CHECH  OK
PAUSE CHECK  OK
STOP CHECK  OK
 EXIT 

Page 59
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game PCB,
Game Software, Control Potentiometers or if the Data has been initialized.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing the SERVICE switch, or select “GO
TO [I/F INITIALIZE” from the I/O Test menu screen. The following screen is
displayed.
2. Ensure that the steering wheel is set to its centre...

Page 60
8. MAINTENANCE
  
Adjustment or maintenance on this machine should be carried out by qualified
personnel only.
Ensure that the 
POWER to the machine is turned OFF before commencing any
maintenance work. (Trouble shooting, service or repairs etc.)
  
Einstellungen und Wartung des Gerätes dürfen nur von dafür qualifiziertem
Fachpersonal vorgenommen werden.
Vor Beginn aller Wartungsarbeiten (Fehlersuche, Reparaturen etc.) muß der
Netzstecker gezogen werden.

 

 


Justeringer eller...