Namco Wangan Midnight Operators Manual

							Page 51 6-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the Monitor.
The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button. To return to the Monitor Test Menu from a test pattern press the
Enter button.
3. Select “EXIT” and press the Enter button to return to the menu screen.
(a) Displays a colour gradation pattern.
(b) Displays a crosshatch pattern for the CRT monitor.
(c) Displays a crosshatch pattern for a projector. (Not used on this game)
(d) Displays a bright white square.
(e) Displays a medium white square.
(f) Displays a dark white square.
(g) Displays an interlace pattern.
(h) Displays a height/width adjustment pattern for the CRT monitor.
(i) Displays a height/width adjustment pattern for a projector. (Not used on this
game)
(j) Displays a full white screen.
 MONITOR TEST
GRADATION PATTERN
CROSSHATCH PATTERN  (CRT)
CROSSHATCH PATTERN  (PROJECTOR)
WHITE WINDOW  (H)
WHITE WINDOW  (M)
WHITE WINDOW  (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST  (CRT)
VIEW ANGLE ADJUST  (PROJECTOR)
FULL WHITE
EXIT
SELECT SW : CHOOSE      ENTER SW : ENTER
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j) 
						

							Page 52 6-5 Sound Test
1. Select “SOUND TEST” on the menu screen to test the audio and adjust the
volume settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode
5. Select “EXIT” and press the Enter button to return to the menu screen.
(a) GAME
This sets the volume level of the sound during the Game Mode.
[0 ~15, DEFAULT = 08]
(b) ATTRACT
This sets the volume level of the sound during the Attract Mode.
[0 ~15, DEFAULT = 08]
(c) REQUEST SONG No.
Each number produces a different sound each time the service button is
pressed. (The sound will turn off after approx 10 seconds)
Number 001 will produce a stereo test. Sound will be produced from the left
speaker then the right speaker and then both speakers.
The message on the screen will display which speaker is active.
(d) Displays details of the Request Song No. selected.
  
 SOUND TEST
  [DEFAULT IN GREEN]  
 
VOLUME
 GAME (0~15)  08  (a)
 ATTRACT (0~15)  08  (b)
REQUEST SONG NO.  000  (c)
MESSAGE :   NULL  (d)
EXIT
  SERVICE SW : REQUEST
  SELECT SW : CHOOSE   ENTER SW : ENTER 
						

							Page 53 6-6 ADS Data (Bookkeeping)
1. Select “ADS DATA” from the menu screen to view the bookkeeping details.
The following screen is displayed.
6-6-1 ADS Page 1
 ADS DATA 1/4
 
POWER ON TIME  5:14 50  (a)
TOTAL PLAY  x:xx xx  (b)
AVE. PLAY TIME  x:xx xx  (c)
PLAY COUNT  xx  (d)
CONTINUE COUNT  xx  (e)
TOTAL COIN  xx  (f)
TOTAL SERVICE  xx  (g)
 NEXT PAGE  (h)
  ADS DATA INITIALIZE  (i)
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a) Displays the total time, (in hours, mins, secs), the game has been switched
on.
(b) Displays the total time, (in hours, mins, secs), the game has been played.
(c) Displays the average time, (in hours, mins, secs), the game has been
played.
(d) Displays the total number of games played.
(e) Displays the total number of continued games played.
(f) Displays the total number of credit pulses received from the CashFlow.
(g) Displays the total number of games entered by the Service Button.
(h) This item continues to page 2 of the ADS Data
(i) This item allows the ADS Data to be reset.
(To reset the data, select YES the press the Enter Button.) 
						

							Page 54 6-6-2 ADS Page 2
 MODE RATIO 2/4
 
SCENARIO 100.0%  (a)
VERSUS 0.0%  (b)
TIME ATTACK  0.0%  (c)
   SCENARIO
AVE. PLAY TIME  H : M SEC  (d)
SHORTEST PLAY TIME  H : M SEC  (e)
LONGEST PLAY TIME  H : M SEC  (f)
PLAY COUNT  xx  (g)
CONTINUE COUNT  xx  (h)
FINISH COUNT  xx  (i)
 NEXT PAGE
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a-c) Displays the percentage between Versus (Linked game) and Time Attack
(single player) games played.
(d) Displays the average time of all games, (in hours, mins, secs).
(e) Displays the shortest time of all games, (in hours, mins, secs).
(f) Displays the longest time of all games, (in hours, mins, secs).
(g) Displays the total number of games played.
(h) Displays the total number of continue games played.
(i) Displays the total number of completed games.
(j) This item continues to page 3  of the ADS Data. 
						

							Page 55 6-6-3 ADS Page 3
 VERSUS 3/4
 
AVE.PLAY TIME  H : M SEC  (a)
PLAY COUNT  xx  (b)
   TIME ATTACK   
AVE PLAY TIME  H : M SEC  (c)
SHORTEST PLAY TIME  H : M SEC  (d)
LONGEST PLAY TIME  H : M SEC  (e)
PLAY COUNT  xx  (f)
CONTINUE COUNT  xx  (g)
 NEXT PAGE
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
(a) Displays the average game time, (in hours, mins, secs), of the versus (2
player) games.
(b) Displays the total number of Versus (2 player) games played.
(c) Displays the average game time, (in hours, mins, secs), of the single
player games.
(d) Displays the shortest game time, (in hours, mins, secs), of the single
player games.
(e) Displays the longest game time, (in hours, mins, secs), of the single
player games.
(f) Displays the total number of single player games played.
(g) Displays the total number of continue games played. 
						

							Page 56 6-6-4 ADS Page 4
 ADS DATA 4/4
NISSAN 100%
 BRN34  50%  BCNR33  0%
 BRN32  50%  S15  0%
 S30  0%
TOYOTA
 JZA80  0%  SW20  0%
MAZDA
 FD35  0%  FC3S  0%
MITSUBISHI
 CT9A  0%  CP9A  0%
SUBARU
GDB 0%  GC8  0
 EXIT 
SELECT SW : CHOOSE      ENTER SW : ENTER
This page displays the percentage that each available car has been
selected for game play. 
						

							Page 57
6-7 Others
1. Select “OTHERS” on the menu screen. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the\
 Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een.
(a) Displays game software version.
(b) Displays the current time of the internal clock. (the time cannot be re\
set).
(c) Displays the Serial Number of the Game Software.
(d) Sets the Speedometer reading displayed on the screen. When US is selected, speed is shown in Miles/hour.
When EU is selected, speed is shown in Kilometers/hour
(e)  Checks the correct functioning of the DVD Player. ( see 6-7-1 page 58)
(f) When selected the Data Initialization Menu appears. To reset all game settings to factory setting and clear all stored data, select YES from the Data
Initialization menu then press the Enter button.
After initializing the backup data ensure that the game is re-initialize\
d.
(see section 7 page 59)
 OTHERS
  [DEFAULT IN GREEN]
ROM1 WM1-3A  10/12/2001 12:34:56  (a)
ROM2 WM2-2A  10/12/2001 12:34:56  (a)
CLOCK   12/12/2001 10:20:42  (b)
S/N 00000-123456    (c)
LANGUAGE EU   (d)
CDVD CHECK      (e)
BACKUP MEMORY INITIALIZE    (f)
EXIT  
SELECT SW : CHOOSE      ENTER SW : ENTER 
						

							Page 58 6-7-1 CDVD Check
1. Select “CDVD Check” on the OTHERS Menu screen. The following screen is
displayed.
2. Select “EXIT” to return to the OTHERS Menu Screen.
 DRIVE CHECK
INITIALIZE OK
MEDIA  SYSTEM 246 CD
STAND-BY CHECK  OK
SEEK CHECK  0K
READ CHECH  OK
PAUSE CHECK  OK
STOP CHECK  OK
 EXIT 
						

							Page 59
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game PCB,
Game Software, Control Potentiometers or if the Data has been initialized.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing the SERVICE switch, or select “GO
TO [I/F INITIALIZE” from the I/O Test menu screen. The following screen is
displayed.
2. Ensure that the steering wheel is set to its centre position and both the
accelerator and brake pedals are released.
3. Press the Service Switch to set to the new limits.
4. Press the Enter Switch. The display will change to the Switch Test screen.
Turn the Steering Wheel and depress the Brake and Accelerator Pedals to
confirm that the steering and pedal controls are working correctly.
4. Slide the Test switch OFF.
  
 I/F INITIALIZE
 
 STEERING +0000
 GAS  000
 BRAKE  000
  KEEP HANDLEBAR CENTER AND
  PRESS SERVICE TO STORE THE RESULT
  GO TO [SWITCH TEST] : ENTER SW 
						

							Page 60
8. MAINTENANCE
  
Adjustment or maintenance on this machine should be carried out by qualified
personnel only.
Ensure that the 
POWER to the machine is turned OFF before commencing any
maintenance work. (Trouble shooting, service or repairs etc.)
  
Einstellungen und Wartung des Gerätes dürfen nur von dafür qualifiziertem
Fachpersonal vorgenommen werden.
Vor Beginn aller Wartungsarbeiten (Fehlersuche, Reparaturen etc.) muß der
Netzstecker gezogen werden.

 

 


Justeringer eller vedligehold af denne maskine bør kun udføres af kvalificeret
personale.
Sørg for, at strømmen til maskinen er slukket før der foretages nogen form for
arbejde (fejlfinding, reparation etc.)
  
Los ajustes y el mantenimiento de esta máquina deben ser realizados sólo por
personal cualificado.
Asegúrese de que la máquina está desconectada antes de comenzar cualquier
trabajo de mantenimiento (reparaciones, resolución de problemas, etc.)
  
L’installation, le service, le réglage, ou la maintenance doivent être effectués
uniquement par les personnes qualifiées.
S’assurer que l’interrupteur soit sor OFF avant de commencer tout travail de
maintenance (localisation d’une panne, rèparations, etc.)
  
Μετατρπές ή επιδιρθώσεις στα µηανήµατα πρέπει να γίννται µν απ
ε*υσιδτηµένα άτµα.
Να είναι σίγυρα κλειστ τ ρεύµα πριν πιαδήπτε δυλειά στ µηάνηµα.
  
Regolazioni e manutenzione su questa macchina devono essere fatti solo da
personale specializzato.
Assicurarsi che la macchina sia SPENTA prima di incominciare qualsiasi lavoro
di manutenzione (guasti, riparazioni etc.)
  
Justering eller vedlikehold på denne maskinen skall bare utføres av kvalifiserte
personell.
Forsikre deg om at strømmen er slått av før du påbegynner noe som helst
vedlikeholdsarbeid (feilsøking, reparasjon osv.)
l