Namco Wangan Midnight Operators Manual

Page 31 [Starting the game]
•When the specified numbers of coins are inserted to obtain the required credits, the
screen displays “Press accelerator pedal to start the game.”  When the accelerator pedal
is depressed, the game starts.
•First, select a car. A desired vehicle can be selected from 12 types by using the steering
wheel, then the color of the vehicle can be chosen with the shift lever. The selection is
finalized when the accelerator pedal is depressed.
•Next, select either automatic or manual...

Page 32
5. INSTALLATION
Notes on Installation
WARNING • NEVER turn the power to the machine ON until installation has been completed.
WARNING • In order to prevent possible electric shocks, be sure that the machine is connected to the mains with a securely connected
earthed plug.
WARNING • So that customers are not injured , ensure that there is at least 500mm separation between other machines or walls.
CAUTION • In order to avoid damage to the machine due to mis-operation, ensure that the voltage of the...

Page 33

DENNE MASKINE ER KUN DESIGNET TIL INDENDØRSBRUG
INSTALLER IKKE MASKINEN PÅ FØLGENDE STEDER
1. Udendørs
2. Direkte sollys, steder med høj fugtighed el. støv, steder med vand udslip, i nærheden af
air-condition eller varme udstyr, steder med usædvanlig høj el. kold temperatur.
3. Steder hvor den vil stå i vejen for nødudgange eller brandslukningsudstyr.
4. Ustabile steder eller steder med for store vibrationer.
5. Steder der ikke er plane.
ESTA MÁQUINA ESTA DISEÑADA ÚNICAMENTE PARA USO EN...

Page 34




DENNE MASKINEN ER BARE KONSTRUERT FOR INNENDØRS BRUK
IKKE INSTALLER MASKINEN PÅ FØLGENDE PLASSER.
1. Utendørs
2. Konstant sollys, plasser med mye fuktighet og støv, plasser hvor det er vannlekasje,
nære luft kjølere eller varme elementer, plasser med overdreven høy eller lav temperatur.
3. Plasser hvor det vill stå i veien for nødutganger eller brannslukking utstyr.
4. Ustabile plasser eller plasser med overdreven vibrasjon.
5. Plasser som ikke er i vater.
 DEZE MACHINE IS ALLEEN VOOR...

Page 35

 	 
ESTA MAQUINA FOI CONCEBIDA PARA UTILIZAÇÃO
EM ESPACOS INTERIORES APENAS NÃO INSTALAR A
MAQUINAS NOS SEGUINTES LOCAIS:-
1. Exteriores.
2. `Luz solar directa, locais com humidade excessiva ou pó, locais aonde existam fugas de
água perto de ar condicionados ou equipamentos calorificos e locais com temperaturas
excessivamente quentes ou frias.
3. Locais aonde ficaria colocada no caminho de saidas de emergência ou equipamentos
extintores de fogo.
4. Locais estruturalmente instaveis ou locais com...

Page 36 5-2 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at least
two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important that a
means of reaching the height safely , without stretching, is available (e.g. steps, step
stool etc.)
1. Remove 3off security screw (M5x12) and remove the Header Acrylic
Retaining Bracket.
2. Remove the Header Acrylic.
3. Place the Header...

Page 37 5. Fit the 3off pozi head screw, with flat and spring washer, (M6x16) to retain the
Header Assembly in position.
Pozi head screw (with flat/spring washers) (M6 x 16)
Header Assy 

Page 38 5-3 Fitting the Seat Assemblies
1. Remove 10off security screw (M5x16) and remove both floor plates.
2. Place the Seat Assemblies up to the Monitor Cabinet and set the adjustable
feet so that the seat base is level with the main cabinet.
3. Connect the connectors.
4. Fit the 8off Hex head screws (M8x25), 4 screws per seat, with flat and spring
washers to retain the Seat Assemblies in position.
5. Refit the floor plates with the 10off security screws (M5x16).
Security screw
 (M5 x 12)
Cabinet...

Page 39 5-4 Adjusting the Level Adjusters
1. When the assembled game is in its final position, lower the twelve (12) level
adjusters, (4off Monitor Assy and 4off each Seat Assy), with a spanner so that
the machine is level and all castors are raised from the floor by approx. 5mm.
Tighten the lock nuts with a spanner to ensure that the level adjusters do not
move.
Note: If the location site of this machine has a polished floor it is recommended that
rubber pads are fitted under the level adjusters to...

Page 40 5-5 Fitting the Game PCB Security Cards
•The Security Cards are designed for this Game only. Do not use them with
other models. Do not insert any other Security Cards. These may result in
malfunctions.
•Always turn OFF the power before inserting the Security cards.
•Always install one Security Card to each Rack Assy.
1 Remove the Monitor Cabinet Lower Rear Door.
2 Insert the Security Card with the arrow upwards into the left slot. Push the
Security Card until it is fully connected to the slot...