Namco Gunmen Wars Service Manual
Have a look at the manual Namco Gunmen Wars Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Namco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 47
Page 47
6-3-3-1 I/O\b PCB\b C\feck
1. Select\b‘I/\f\bPCB\bCHECK’\P\bfrom\bthe\bI/\f\bTest\bScreen.\bThe\bfollowing screen\bis\bdisplayed:-
Note: T\bis sc\feen is fo\f info\fmation only. No adjustments a\fe available.
6-3-3-2 How\bto\b[I/F\bInitialize] Select\b‘How\bto\b[I/F\bInitialize]’\bfrom\bthe\bI/\f\bTest\bmenu.\bThe\bfollowing
screen\b is\b displayed.
Note: Initialization cannot be executed f\fom t\bis sc\feen. ( see 7 page 56 )
I/\f\bTEST
DIP\b4 12345678 [ON=RED]
LINK ON 2...](http://img.usermanuals.tech/thumb/5509/60280/w64_gunmen-wars-operator-s-english_d-46.png "Page 47
Page 47
6-3-3-1 I/O\b PCB\b C\feck
1. Select\b‘I/\f\bPCB\bCHECK’\P\bfrom\bthe\bI/\f\bTest\bScreen.\bThe\bfollowing screen\bis\bdisplayed:-
Note: T\bis sc\feen is fo\f info\fmation only. No adjustments a\fe available.
6-3-3-2 How\bto\b[I/F\bInitialize] Select\b‘How\bto\b[I/F\bInitialize]’\bfrom\bthe\bI/\f\bTest\bmenu.\bThe\bfollowing
screen\b is\b displayed.
Note: Initialization cannot be executed f\fom t\bis sc\feen. ( see 7 page 56 )
I/\f\bTEST
DIP\b4 12345678 [ON=RED]
LINK ON 2...")
![Page 48
I/O TEST
DIP 4 12345678\b [ON=RED]
LINK ON\b2
GUN TEST
GUN TRIGGER OFF
SOLENOID OFF
GUN LED OFF
GUN YAWING RIGHT 0000
GUN YAWING LEFT 0000
SLIDE FORWARD 0000
SLIDE BA\fK 0000
SLIDE RIGHT 0000
SLIDE LEFT 0000
EXIT
ENTER SW : ENTER
6-3-3-3 Gun Test
1. Selec\b ‘GUN TEST’ from \bhe I/O Tes\b Screen. The following screen isdisplayed:-
2. Selec\b EXIT and press \bhe En\b\Her bu\b\bon \bo re\burn \bo \bhe I/O TEST screen.
Upon selec\bing \bhe GUN TEST screen, \bhe blue LED on \bhe gun will flash...](http://img.usermanuals.tech/thumb/5509/60280/w64_gunmen-wars-operator-s-english_d-47.png "Page 48
I/O TEST
DIP 4 12345678\b [ON=RED]
LINK ON\b2
GUN TEST
GUN TRIGGER OFF
SOLENOID OFF
GUN LED OFF
GUN YAWING RIGHT 0000
GUN YAWING LEFT 0000
SLIDE FORWARD 0000
SLIDE BA\fK 0000
SLIDE RIGHT 0000
SLIDE LEFT 0000
EXIT
ENTER SW : ENTER
6-3-3-3 Gun Test
1. Selec\b ‘GUN TEST’ from \bhe I/O Tes\b Screen. The following screen isdisplayed:-
2. Selec\b EXIT and press \bhe En\b\Her bu\b\bon \bo re\burn \bo \bhe I/O TEST screen.
Upon selec\bing \bhe GUN TEST screen, \bhe blue LED on \bhe gun will flash...")
![Page 50
6-3-3-5 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches.
The following screen is displayed.
2. The display shows the current state of the switches.
3. Press the Up Select switch and the Enter switch together to EXIT
and return to the I/O menu screen
(a) Not Used
(b,c,d) Display will change from OFF to ON each time a switch is
operated.
(e) Display will change to UP or DOWN as the select is operated.
I/O TEST
DIP 4123456787 [ON/RED]
SWITCH TEST
COIN0...](http://img.usermanuals.tech/thumb/5509/60280/w64_gunmen-wars-operator-s-english_d-49.png "Page 50
6-3-3-5 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches.
The following screen is displayed.
2. The display shows the current state of the switches.
3. Press the Up Select switch and the Enter switch together to EXIT
and return to the I/O menu screen
(a) Not Used
(b,c,d) Display will change from OFF to ON each time a switch is
operated.
(e) Display will change to UP or DOWN as the select is operated.
I/O TEST
DIP 4123456787 [ON/RED]
SWITCH TEST
COIN0...")
6-3-3-6 Camera Check 1. Select ‘CAMERA CHECK’ from the I/O Test Screen. The following screen is displayed:- In the CAMERA CHECK Screen, the current view of the camera is displayed in the centre box. (a) MIRROR/PHOTO By pressing the Service Switch, the image from the camera is frozen on the screen and the word MIRROR, just below the image box, changes to PHOTO. This is the image that would be used during the game. Pressing the Service Switch again rever ts back to current camera image, and the word PHOTO changes to MIRROR. The mode of [MIRROR] is used for adjustment of the image, and the mode of [PHOTO] to verify the picture to be used during the game. (b) IRIS ADJUST This setting is used to adjust the brightness of the image. The brightness of the image is automatically adjusted to the optimum value by the system, but this item allows the brightness level to be set manually. Select this item and press the ENTER button. Use the Select UP/ DOWN switch to make the image brighter or darker. There are three brighter and three darker settings available. Press the ENTER button to store the new setting and to exit this mode.I/O TEST CAMERA CHECK [DEFAULT IN GREEN] MIRROR............................................ (a) IRIS ADJUST D B.................................. (b) TINT ADJUST G R.................................. ( c ) V POSITION +000..................................... (d) H POSITION +000..................................... (e) EXIT SERVICE SW : TAKE A PHOTO/RELEASE UP/DOWN : SELECT ENTER SW : ENTER
(c) TINT ADUST This setting is used to adjust the colour tint of the image. The colour tint of the image is automatically adjusted to the optimum value by the system, but this item allows the colour tint level to be set manually. Select this item and press the ENTER button. Use the Select UP/DOWN switch to increase or decrease the red tint. The red tint can be increased or decreased by three levels each. Press the ENTER button to store the new setting and to exit this mode. (d) V POSITION This setting is used to set the vertical position of the camera view. Select this item and press the ENTER button. Use the Select UP/DOWN switch to move the camera view up or down. Press the ENTER button to store the new setting and to exit this mode. (e) H POSITION This setting is used to set the horizontal position of the camera view. Select this item and press the ENTER button. Use the Select UP/DOWN switch to move the camera view left or right. Press the ENTER button to store the new setting and to exit this mode. Select EXIT and press the Select Button to return to the I/O Test Screen. Adjustment of the Camera Adjust the camera to obtain the best image by following the steps below. (1) Verify moving images. Make sure that the image in the test screen box is moving. If a still picture is shown press the Brake Pedal once. (2) Adjust the image quality. Check the brightness and colour tint of the image and if neccessary adjust by following steps (b) and (c) above. (3) Adjust the position. Make any adjustments neccessary by following steps (d) and (e) above whilst checking the image displayed.
6-3-4 Monitor Test 1. Select “MONITOR TEST” on the menu screen to test and adjust the Monitor. The following screen is displayed. 2. Use the Select Up/Down switch to choose the required item then press the Enter button. To return to the Monitor Test Menu from a test pattern press the Enter button. 3. Select “EXIT” and press the Enter button to return to the menu screen. Note: Items (c) and (i) are not used on this game. MONITOR TEST GRADATION PATTERN..................................... (a) CROSSHATCH PATTERN (CRT)..................................... (b) CROSSHATCH PATTERN (PROJ)..................................... (c) WHITE WINDOW (H)..................................... (d) WHITE WINDOW (M)..................................... (e) WHITE WINDOW (L)..................................... (f) INTERLACE PATTERN..................................... (g) VIEW ANGLE ADJUST (CRT)..................................... (h) VIEW ANGLE ADJUST (PROJ)..................................... (i) FULL WHITE..................................... (j) EXIT UP/DOWN : SELECT ENTER SW : ENTER (a) Displays vertical colour bars. (b) Displays a crosshatch pattern for CRT monitors. (c) Displays a crosshatch pattern for projection monitors (not used on this game). (d) Displays a white square (bright). (e) Displays a white square (medium) (f) Displays a white square (dim) (g) Displays an interlaced pattern. (h) Displays a pattern for height/width adjustment for CRT monitors. (i) Displays a pattern for height/width adjustment for projection monitors (not used on this game). (j) Outputs white to the full screen area.
6-3-5 Sound Test 1. Select “SOUND TEST” on the menu screen to test the audio and adjust the volume settings. The following screen is displayed. 2. Use the Select Up/Down switch to choose the required item then press the Enter button. 3. Use the Up/Down switch to change the setting. 4. Press the Enter button to return to item select mode 4. Select “EXIT” and press the Enter button to return to the menu screen. SOUND TEST VOLUMEALL SP............................ (a) FRONT L SP (00~64) 00........................ (b) FRONT R SP (00~64) 00........................ ( c ) ATTRACT SOUND VOL 00........................ (d) REQUESTSONG NO. 000...................... (e) MESSAGE : EXIT SERVICE : REQUEST ON/OFF UP/DOWN : SELECT ENTER SW : ENTER (e) Each number produces a different sound each time the service button is pressed. (The sound will be turned off by pressing the service button or automatically after approx 10 seconds) Number 001 will produce a stereo test. Sound will be produced from the left speaker then the right speaker and then both speakers together. The message on the screen will display which speaker is active. (a) Adjusts the volume of the left and right speakers together. (b) Adjusts the volume of the left speaker only. (c) Adjusts the volume of the right speaker only. (d) Adjusts the volume level during attract mode.
Page 55 6-3-6 ADS Data By selecting ADS Data from the menu screen, all of the bookkeeping details can be read and/or reset. 6-3-7Others 1. Select “OTHERS” on the menu screen. The following screen is displayed. 2. Use the Select Up/Down switch choose the required item then press the Enter button. 3. Select “EXIT” and press the Enter button to return to the menu screen. (a,) Displays game software version. (b) Not used on this game (c) Used to test the PCB. (this function is only for factory testing) (d) Sets the language displayed on the screen. (English:ENG, German:GER, French:FRA, Spanish:SPA, Por tugese:POR, Italian ITA) (e) When selected the Data Initialization Menu appears. To reset all game settings to factory setting and clear all stored data , select YES from the Data Initialization menu then press the Enter button. After initializing the backup data ensure that the game is re- initialized. (see section 7 page 56) OTHERS ROM1 Ver. 97/07/07 21:15:59.................... (a) CLOCK --/--/-- --- --:--:--.................... (b) PCB TEST............................... (c) LANGUAGE ENG............................... (d) BACKUP MEMORY INITIALIZE............................... (e) EXIT UP/DOWN : SELECT ENTER SW : ENTER
7. INITIALIZATION Adjustments when Replacing Parts The following operation must always be performed after replacing the Game PCB, Rom, or Control Potentiometers. The game will not operate correctly if these adjustments are not made. 1. Slide the TEST switch ON while pressing the SERVICE switch . The following screen is displayed. GUN INITIALIZE AIM AT CENTER OF THE CROSS AND PUSH SERVICE BUTTON GUN YAWING SLIDE FORWARD 0000 LEFTRIGHT 0000 0000 BACK 0000 TRIGGER : ADJUST SLIDE AND SIGHT ENTER SW : ENTER 3. Ensure that the gun is completely central of all travel and then press the service button to reset all values. 4. Slide the Test switch OFF to return to normal game mode.
G 7 1 7&& ( 8 . $ 9 D ! # $ # % & $ : ; 8& . 1 9 < = % ( % c $ ( ) ( ) ($ >) . ) ( (( ) 8 . 9 E* + % , ? + + % 8 . , . 9 F*- . $. / . $ 0 / / >- - 7&& $ $ 8 - . @ . 9 KΜετατρπές ή επιδιρθώσεις στα µη0ανήµατα πρέπει να γίννται µ/ν απ/ ευσιδτηµένα άτµα. Να είναι σίγυρα κλειστ/ τ ρεύµα πριν πιαδήπτε δυλειά στ µη0άνηµα. I1 % % $ %% > = $ % 8 . % 9 N $( 2 ( ( ) $ ($ & ( ) 2 $ ) 2 $( 8 )( . $ 9
OAanpassingen of onderhoud aan deze machine dient alleen uitgevoerd te worden door bekwaam personeel. Zorg ervoor dat de machine UITgeschakeld is voordat er enig onderhoudswerk wordt verricht (troubleshooting, reparaties etc.) PAfinações ou manutenção nesta maquina, deverão ser efectuadas sómente por pessoal qualificado. Certifique-se que a maquina se encontra desligada sempre que iniciar qualquer tipo de trabalho de manutenção. (identifação de avarias, reparação etc.) SJusteringar och underhåll på denna maskin skall endast utföras av kvalificerad personal. Försäkra dig om att strömmen är avstängd innan underhållsarbete påbörjas (felsökning, reparationer etc.) lTätä laitetta saa säätää tai huoltaa vain siihen ammattipätevyyden omaava henkilökunta. Varmista, että laite on kytketty POIS PÄÄLTÄ ennen työn aloittamista.
8-1 Greasing the Gun Assembly Greasing should be performed every six months. 1. Remove 4off security screw (M5x16) and remove the Gun Vac-form Upper, 2. Remove 15off security screw (M5x20) and remove the Gun Vac-form Lower. 3. Grease the circumfrance of the bearings. Recommended grease : Castrol LM30 or equivalent. Security screw (M5 × 16)Security screw (M5 × 20) Security screw (M5 × 16) Gun Vac-form Upper Gun Vac-form LowerGun Vac-form UpperSecurity screw (M5 × 20) Security screw (M5 × 20) Security screw (M5 × 20) Security screw (M5 × 20) Greasing point Greasing point
8-2 Replacing the Fluorescent Lamp or Starter 1. Remove 6off security screw (M5x16) and remove the Lower Retaining bracket and Header Acrylic. 2. Replace the fluorescent lamp and/or starter. 3. Reassemble in reverse order. Security screw (M5 x 16) Lower Retaining Brkt Header Acrylic Fluorescent lamp Starter