Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide

Multi-Tech Systems, Inc. MultiVOIP User GuideChapter 4 - Configuring the Master MultiVOIP
31
Building a Proprietary Phonebook Directory
Note:  This section starts at Step 27 as it is a continuation from Step 26 on pages 27-28.
27. To build your proprietary MVP120 Phone Directory (in an H.323 environment without the
Gatekeeper option enabled), you will first need to select the Proprietary Phonebook
option and then configure the “Master” MVP120 and then the “Slave” MVP120s (or other
H.323 endpoints)....

Multi-Tech Systems, Inc. MultiVOIP User GuideChapter 4 - Configuring the Master MultiVOIP
32 29. Enter a unique phone number for the local VOIP in the Phone Number box and enter 1 for
the Voice/Fax channel in the Voice Channel box. This number must be 1 for each MVP120.
Note: MVP120 and MVP110 will only have one entry and will be Channel 1.
30. The Description box is optional, but can be useful in associating the channel to the
extension. If you wish, enter a description of your local phone number. This...

Multi-Tech Systems, Inc. MultiVOIP User GuideChapter 4 - Configuring the Master MultiVOIP
33
33. Add all other phone numbers (slave units and standalone units) to the Phone Directory
database. To add a channel of a slave MultiVOIP, click Add and the Add/Edit Phone Entry
dialog box displays.
34. Enter the phone number for the MultiVOIP in the Station Information group Phone Number
box.
35. Click inside the Description box and enter a description for the remote MultiVOIP phone
number for the Voice/Fax...

Multi-Tech Systems, Inc. MultiVOIP User GuideChapter 4 - Configuring the Master MultiVOIP
34
38. To configure a stand-alone endpoint (a PC with NetMeeting software), click Add and the
Add/Edit Phone Entry dialog box displays again.
39. Enter the phone number for the  stand-alone endpoint in the Station Information group
Phone Number box.  For example, 301.
40. Click inside the Description box and enter a description for the remote stand-alone phone
number. For example, “Human Resources Desk”.
Note:...

Multi-Tech Systems, Inc. MultiVOIP User GuideChapter 4 - Configuring the Master MultiVOIP
35
43. When you have finished, click OK to download the setup configuration to the
MVP120.
44. Click OK.  After the setup is written to the MVP120, the unit reboots.
45. Verify that the BOOT LED on the MVP120 is off after the download is complete. This
may take several minutes as the MVP120 reboots.
At this time your master MVP120 is configured. Proceed to the “Configuring Your
Slave MVP120s” section. 



	


Chapter 5
Configuring the Slave MultiVOIPs 

37 Chapter 5 - Configuring the Slave MultiVOIPs
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 5 - Configuring the Slave MultiVOIPs
If the Proprietary Phonebook option on the Phone Directory Database dialog box was
enabled, then you will need to configure all remote H.323 endpoints as “Slave” units. For
example, the MVP120 at the company’s subsidiary office in London would need to be
configured as a “Slave.”
CAUTION: If you are installing a MVP120 behind a Firewall, the Firewall must support...

38 Chapter 5 - Configuring the Slave MultiVOIPs
Multi-Tech Systems, Inc. MultiVOIP User Guide4. In the Port Address group, enter the IP Address and IP Mask. In the Gateway Address
group, enter the gateway IP address for the slave unit.
The IP Address is the unique IP address that you assign to the MVP120, and the Gateway
Address is the IP address of the device (such as a network router) connected to the Internet/
Intranet.
Click OK when you are finished. The Main menu displays.
5. From the Main menu,...

39 Chapter 5 - Configuring the Slave MultiVOIPs
Multi-Tech Systems, Inc. MultiVOIP User Guide7. The Voice/Fax tab displays the parameters for the voice gain, DTMF (Dual Tone Multi-
Frequency) gain, voice coder, faxing, and advanced features such as Silence Compression,
Echo Cancellation, and Forward Error Correction.
8. Input gain modifies the level of the audio coming in to the voice channel before it is sent over
the Internet to the remote MVP120.  Output gain modifies the level of the audio being...

40 Chapter 5 - Configuring the Slave MultiVOIPs
Multi-Tech Systems, Inc. MultiVOIP User Guide11. You can enable the voice/fax advanced features by clicking (checking) the silence
compression, echo cancellation, or forward error correction options.
Silence Compression - Defines whether silence compression is enabled for the voice
channel. If silence compression is enabled, the MVP120 will not transmit voice packets when
silence is detected, thereby reducing the amount of network bandwidth that is being...