Home > Multitech > Communications System > Multitech MultiVOIP200 Upgrade User Guide

Multitech MultiVOIP200 Upgrade User Guide

Add to Favourites
    Download as PDF

    View the Multitech MultiVOIP200 Upgrade User Guide for free. All the Multitech manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 1 MultiVOIP200 Upgrade Caution Product Update 10/19/00 Part Number: 82095116, Rev. B Important read before installation: MultiVOIP200s with H.323 compatible firmware (MVP200 version 2.50 or later) are not compatible with MultiVOIPs using earlier versions of firmware. Also, the MultiVOIP200s with H.323 compatible firmware will not operate behind non-H.323 compliant proxy servers or firewalls. Choosing Proprietary or H.323 mode for your new MultiVOIP200 The MultiVOIP200s are shipped with the H.323...
    Page 2 2 Upgrading your previously-installed MultiVOIP200s from 2.01D or earlier to H.323 (version 2.50). MVP200 version 2.50 Installation Instructions Note: steps 5 - 9 must be performed locally via the command port. Note: there are two different MVP200 hardware platforms. If you have the hardware platform where the VOICE CHANNEL 2 LEDs are above the CHANNEL 1 LEDs, you must confirm that sufficient Flash memory is installed before proceeding with the upgrade. To verify this, remove the two screws from the...
    Start reading Multitech MultiVOIP200 Upgrade User Guide

    Related Manuals for Multitech MultiVOIP200 Upgrade User Guide

    All Multitech manuals