Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide

MultiVOIP User Guide Technical Configuration (Digital)
141 

MultiVOIP User Guide Technical Configuration (Digital Voips)
142
15. Set Log Reporting Method.  The Logs screen lets you choose how
the VoIP administrator will receive log reports about the MultiVOIP’s
performance and the phone call traffic that is passing through it.  Log
reports can be received in one of three ways:
A. in the MultiVOIP program (GUI),
B. via email (SMTP), or
C. at the MultiVoipManager remote voip system
management program (SNMP).
Accessing “Logs” Screen
Pulldown Icon
Shortcut Sidebar...

MultiVOIP User Guide Technical Configuration (Digital)
143
Select the logging option that applies to your VoIP system design.  If
you intend to use a SysLog Server program for logging, click in that
Enable check box. The common SysLog logical port number is 514.  If
you intend to use the MultiVOIP web browser GUI for configuration
and control of MultiVOIP units, be aware that the web browser GUI
does not support logs directly.  However, when the web browser GUI
is used, log files can still be sent to the...

MultiVOIP User Guide Technical Configuration (Digital Voips)
144
SNMP Y/N Log messages will be delivered to the
MultiVoipManager application program.
SMTP Y/N
Log messages will be sent to user-
specified email address.
SysLog Server
EnableY/N
This box must be checked if logging is to
be done in conjunction with a SysLog
Server program. For more on SysLog
Server, see Operation & Maintenance
chapter.
IP Address n.n.n.n
for n=
0-255IP address of computer, connected to
voip network, on which SysLog Server...

MultiVOIP User Guide Technical Configuration (Digital)
145
16. Set Supplementary Services Parameters.  This   dialog box can be
reached by pulldown menu, keyboard shortcut, or sidebar.
Accessing “Supplementary Services Parameters”
Pulldown Icon
Shortcut Sidebar
 Ctrl + Alt +H
Supplementary Services features derive from the H.450 standard, which
brings to voip telephony functionality once only available with PSTN or
PBX telephony.  Supplementary Services features can be used under
H.323 only and not under...

MultiVOIP User Guide Technical Configuration (Digital Voips)
146
In each field, enter the values that fit  your particular network.
Of the features implemented under Supplementary Services, three are
very closely related:  Call Transfer, Call Hold, and Call Waiting.  Call
Name Identification is similar but not identical to the premium PSTN
feature commonly known as Caller ID.
Call Transfer.  Call Transfer allows one party to re-connect the party
with whom they have been speaking to a third party.  The...

MultiVOIP User Guide Technical Configuration (Digital)
147
the channel over which the call is being originated (for example,
“Calling Party - Omaha Sales Office Line 2”). If that voip channel is
dedicated to a certain individual, the descriptor could say that, as
well (for example “Calling Party - Harold Smith in Omaha”).  When
the home voip receives a call from any remote voip, the home voip
sends a status message back to that caller.  This message confirms
that the home voip’s phone channel is either...

MultiVOIP User Guide Technical Configuration (Digital Voips)
148
The Supplementary Services fields are described in the tables below.
Supplementary Services Parameter Definitions
Field Name Values Description
Select
Channel1-2 (210);
1-4 (410);
1-8 (810)The channel to be configured is
selected here.
Call
Transfer
EnableY/NSelect to enable the Call Transfer
function in the voip unit.
This is a “blind” transfer and the
sequence of events is as follows:
Callers A and B are having a
conversation.
Caller A...

MultiVOIP User Guide Technical Configuration (Digital)
149
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Hold
EnableY/NSelect to enable Call Hold function in
voip unit.
Call Hold allows one party to
maintain an idle (non-talking)
connection with another party while
receiving another call (Call Waiting),
while  initiating another call (Call
Transfer), or while performing some
other call management function.
Hold
Sequencephone
keypad
characters
The numbers and/or symbols...

MultiVOIP User Guide Technical Configuration (Digital Voips)
150
Supplementary Services Definitions (cont’d)
Field Name Values Description
Call Name
Identification
EnableEnables CNI function.  Call Name
Identification is not the same as Caller
ID.  When enabled on a given voip
unit currently being controlled by the
MultiVOIP GUI (the ‘home voip’),
Call Name Identification sends an
identifier and status information to
the administrator of the remote voip
involved in the call. The feature
operates on a...