Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways Quick Start Guide

MultiVOIP Quick Start Guide  Quick Hookups 
11
Hookup for MVP410 & MVP810 

Quick Hookups  MultiVOIP Quick Start Guide
12
Hookup for MVP2400
Power Connection
Command Port Connection
1
0DIGITAL VOICE
TRUNKETHERNET
10/100
RS232 COMMAND
POWER
T1
PBX
PSTN
Telephony Connection
Network Connection


Hub
Hookup for MVP210


	


	
	

	
	
	
		
	
		
	
E&MFXS/FXOFXS/FXORS232
COMMAND 10/100POWER ETHERNET
E&M
	



	
	



 


 
	
 	
 

MultiVOIP Quick Start Guide Software Installation
13
Load MultiVOIP Control Software onto PC
For more details, see Chapter 4: Software Installation in User Guide.
1. MultiVOIP must be properly cabled.   Power must be turned on.
2. Insert MultiVOIP CD into drive. Allow 10-20 seconds for Autorun to
start.  If Autorun fails, go to
My Computer | CD ROM drive | Open.   Click Autorun icon.
3. At first dialog box, click Install Software.
4. At ‘welcome’ screen, click Next.
5. Follow on-screen instructions....

Phone/IP Starter Config.  MultiVOIP Quick Start Guide
14
Phone/IP Starter Configuration
Full details here:
MVP2400
MVP2410
MVP3010Chapter 5: Technical Configuration for
Digital T1/E1 MultiVOIPs
in User Guide.
MVP210
MVP410
MVP810Chapter 6: Technical Configuration for
Analog MultiVOIPs
in User Guide
1. Open MultiVOIP program:  Start | MultiVOIP xxx | Configuration.
2. Go to Configuration | IP.  Enter the IP parameters for your voip site.
3. Go to Configuration | Voice/Fax.  Select Coder | “Automatic.”...

MultiVOIP Quick Start Guide  Phone/IP Starter Config.
15
Phone/IP Starter Configuration (continued)
7. (continued) Enter this email address in the “Login Name” field.
Type the password for this email account.
Enter the IP address of the  email server where the MultiVOIP’s email
account is located in the “Mail Server IP Address” field.
Typically the  email log reports are sent to the Voip Administrator
but they can be sent to any email address.  Decide where you want
the email logs sent and enter that...

Phonebook Starter Config.  MultiVOIP Quick Start Guide
16
Phonebook Starter Configuration (with remote voip)
To do this part of the quick setup, you need to know of another voip
that you can call to conduct a test.  It should be at a remote location,
typically somewhere outside of your building.  You must know the
phone number and IP address for that site.  We are assuming here that
the MultiVOIP will operate in conjunction with a PBX.
You must configure both the Outbound Phonebook and the Inbound...

MultiVOIP Quick Start Guide  Phonebook Starter Config.
17
4. Suppose you want to call a phone number outside of your building
using a phone station that is an extension from your PBX system (if
present).  What digits must you dial?  Often a “9” or “8” must be
dialed to “get an outside line” through the PBX (i.e., to connect to the
PSTN).  Generally, “1 “or “11” or “0” must be dialed as a prefix for
calls outside of the calling code area (long-distance calls, national
calls, or international calls).
On a...

Phonebook Starter Config.  MultiVOIP Quick Start Guide
18
5. In the “Destination Pattern” field of the Add/Edit Outbound
Phonebook screen, enter the digits from step 4 followed by the digits
from step 3.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Answer:  enter 81312 as
Destination Pat-
tern in Outbound
Phone-book of
Seattle voip.
London/Birming. system.
Leading zero of
Birmingham area code is
dropped when combined
with national-dialing
access code. (Such...

MultiVOIP Quick Start Guide  Phonebook Starter Config.
19
6. Tally up the number of digits that must be dialed to reach the  remote
voip site (including prefix digits of all types).  Enter this number in
the “Total Digits” field.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
To complete Seattle-to-
Chicago call, 81312 must be
followed by the 7-digit local
phone number in Chicago.
Answer:  enter 12 as number
of Total Digits in
Outbound Phone-
book of Seattle...

Phonebook Starter Config.  MultiVOIP Quick Start Guide
20
8. Select the voip protocol that you will use (H.323 or SIP).
9. Click OK. to exit from the Add/Edit Outbound Phonebook screen.
Inbound Phonebook
1. Open the MultiVOIP program.
(Start | MultiVOIP xxx | Configuration
2. Go to Phone Book | PhoneBook Modify | Outbound Phonebook
| Add Entry.
3. In the “Remove Prefix” field, enter your local calling code (area code,
country code, city code, etc.) preceded by any other “access digits”
that are required...