Motorola Workabout Pro 4 User Guide
Have a look at the manual Motorola Workabout Pro 4 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
APPENDIX D INTERNAL IMAGER & SCANNER SPECIFICATIONS DInternal Imager & Scanner Specifications This appendix lists specification s for the following internal scanners. For a current list of model numbers and descriptions for Workabout Pro4 scanner pod and back cover kits , please contact your Zebra representative or go to: http://www.zebra.com/US-EN/Produ ct+Lines/Psion/?WT.mc_id=psion_us_p_handheld SE965 Scanner SE965 Dimensions0.46 in. H x 0.85 in. W x 0.61 in. D 11.75 mm H x 21.6 mm W x 15.5 mm D Weight 0.27 oz./7.6 g Configuration Decoded Interface SSI Control over TTL Serial on a 12-pin ZIF connector Scan Angle Wide (default): 47 ° (typical) Medium: 35° (typical) Narrow: 10° (typical) Note: The SE965 scan engine does not require margin on either side of the barcode t o decode. The 47° scan line provides identical scanning performance to older scan engines with a scan line of 53°. Skew Tolerance ± 40° from normal Pitch Tolerance ± 65° from normal Roll Tolerance ± 35° from vertical Specular Dead Zone ± 8° Optical Resolution 0.005 i n. minimum element width Scan Repetition Rate 104 (± 12 ) scans/sec (bidirectional) Print Contrast Minimum 25% absolute dark/light reflectance measu red at 650 nm
D - 2 Workabout Pro4 (Windows Embedded CE 6.0) User Manual SE965 Decode Zones Ambient Lighting Toler- anceTolerant to typical artificial i ndoor and natural outdoor (dire ct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED 5. 450 Ft Candles (4,844 Lux) Sunlight 8000 F t Candles (86,111 Lux) Operating Temperature -22° F to 140° F/ -30° C to 60° C Storage Temperature -40° F to 158° F/ -40° C to 70° C SE965
Internal Imager & Scanner Specifications D - 3 SE655 Scanner ParameterSpecifications Physical Characteristics Dimensions 0.3 in. H x 0.94 in. W x 0.47 in. DUMTS/HSPA+: Five b and, 800/850/900/1900/2100MHz 7.7 mm H x 23.8 mm W x 12.0 mm D Weight
D - 4 Workabout Pro4 (Windows Embedded CE 6.0) User Manual SE655 Decode Ranges Note: The distances marked with an asterisk (*) are a result of the field of view (FOW) limitation. SE1524ER – Exte nded Range Scanner TypicalGuaranteed Code 128 5 mil Near 2.75 in./70 mm 3.90 in./99 mm Far 8.25 in./210 mm 6.25 in./159 mm Code 39 5 mil Near 2.25 in./57 mm 3.15 in./80 mm Far 9.75 in./248 mm 8.00 in./203 mm Code 39 7.5 mil Near 1.50 in./38 mm 2.50 in./64 mm Far 12.75 in./324 m m 10.25 in./260 mm 100% UPC-A Near 2.00* in./51 mm 2.25 in./57 mm Far 15.75 in./400 mm 11.00 in./279 mm Code 39 20 mil Near 1.50* in./38 mm 2.00* in./51 mm Far 24.0 in./610 mm 18.25 in./464 mm ParameterSpecification Type Laser Class 2 Light Source Visible Laser Diode 650 nm Scan Rate 35 (± 5) scans/sec (bi-directional). Scan Angle/Field of View 13.5° ± 0.7° Scan Patterns Linear Minimum Print Contrast Minimum 25% absolute dark/light reflectan ce measured at 650 nm. Symbologies UPC/EAN, Code 128, UCC.EAN128, RSS, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI. Programmable Parameters Laser On Time, Aim Duration, Power Mode, Trigger Mode, Bi-directional Redundancy, Symbology types/lengths, Data formatting. Ambient Light Artificial: 450 ft. candles (4,844 Lux) Sunlight: 4,000 ft. candles (86,112 Lux). Laser Output Power (peak) 1.26 mW
Internal Imager & Scanner Specifications D - 5 SE1524ER Decode Zones SE1524ER Decode Zone A (Short Range, Small Codes) SE1524ER Decode Zone B ( Long Range, Large Codes)
D - 6 Workabout Pro4 (Windows Embedded CE 6.0) User Manual SE4500SR – Standard Range Imager ParameterSpecification Power Requirements - Input Vo l ta g e3.3 V ± 0.3 V at 23° C Operating Mode Supply Currents (c onditions VCC=VCC_SENSOR=VCC_I LLUM = 3.3VDC) (at 23° C): Low Power Idle Image Acquisition Illumination Enabled Maximum Operating Current 500 µA 18 mA 80 mA 200 mA 250 mA (aiming on during ex posure, illumination enabled) Maximum Sensor Power Supply Noise* (at 23° C) 100 mVp-p (3.3 V, 10 Hz - 100 kHz) for decoding 30 mVp-p (3.3 V, 10 Hz - 100 kHz) for image capture Optical Resolution SR focus: 5.0 mil (Code 39), 6.7 mil (PDF417) *For better image quality in image capture applications, use an additional filter on VCC_SENSOR. For additional performance improvement, provide a separately regulated 3.3 V s upply for the sensor. Specular Dead Zone: Illumination On Illumination Off Up to 20º depending on target dis tance and substrate glossiness None Skew Tolerance ± 60º Pitch Angle ± 60º Roll 360º Ambient Light Immunity (Sunlight ) 9000 ft. candles (96,900 lux) Imaging Sensor: Image Resolution Grey Scale Field of View (FOV) 752 H x 480 V pix els (Wide VGA) 256 levels (8 bits per pixel) SE4500-SR: 39.6º horizontal, 25.7º vertical Focusing Distance from Front of Engine (SR) 8 in. / 20.3 cm Aiming Element: Visible Laser Diode (VLD) Central Dot Optical Power Pattern Angle 655 ± 10 nm 0.6 mW (typical) 40º horizontal, 30º vertical Illumination System: LEDs Pattern Angle 625 ± 5 nm (domi nant wavelength) 60º x 40º at 80% center intensity
Internal Imager & Scanner Specifications D - 7 Shock 2000 G ± 5% applied via any mounting surface at -30º and 55º C for a period of 0.85 ± 0.05 msec 2500 G ± 5% applied via any mounting surfac e at 23º C for a period of 0.85 ± 0.05 msec Vibration Unpowered SE4500 withstands a random vibration along e ach of the X, Y, and Z axes for a period of one hour per axis (6 G rms), defi ned as follows: 20 to 80 Hz Ramp up at 0.04 G 2/Hz at 3 dB/octave 80 to 350 Hz 0.04 G 2/Hz 350 Hz to 2 kHzRamp down at 0.04 G 2/Hz at 3 dB/octave ESD ± 2 kV @ connector Laser Safety Class CDRH / IEC Class 2 LED Class IEC Class 1M Maximum Engine Dimensions 11. 8 mm H x 21.50 mm W x 16.3 mm D 0.46 in. H x 0.85 in.W x 0.64 in. D Weight 8.0 grams (0.28 oz) Electrical Interface 21 pin 0.3 mm pitch ZIF connector ParameterSpecification
D - 8 Workabout Pro4 (Windows Embedded CE 6.0) User Manual SE4500SR Decode Zone In.05 10 15 20 25cm 012.7 25.4 38.1 50.8 63.5 7.5 7.1 15.5 SE4500-SR in. 9 4.5 0 cm 22.9Wid 11.4 t h o 0f 2.1 5milCode39 F4.5 11.4ie 6.67mil PDF4173.4 7.5 milCode 39*10.6 l922.9 d *10mil PDF41710.1 1.6 13mil(100% UPC) *15mil PDF41714.7 2.815milDataMatrix 12.4 20milCode 39* DepthofField 24.7
APPENDIX E WORKABOUT PRO4 SPECIFICATIONS E Workabout Pro4 Specifications The Workabout Pro4 Hand-Held Comp uter (7528 Long and 7528 Short) Hardware Dimensions and Weight 7528 Long • 223 mm x 75/100 mm x 31/42 mm (8.78 x 2.95/3.94 x 1.22 x 1.65 inches) • 526g (18.6 oz) 7528 Short • 200 mm x 75/100 mm x 31 /42 mm (7.87 x 2.95/3.94 x 1.22/1.65 inches) • 461g (16.2 oz) Processor and Memory • CPU: Sitara™ AM37x ARM Cortex™-A8 processor • Memory: 512 MB RAM/4 GB Flash Operating System • Microsoft Windows ® Embedded Hand-Held 6.5 Power Management • Battery Packs (Lithium-ion): 4400 mAh, 2850 mAh, 4680 mAh • Super capacitor power backup Expansion Ports •Micro SD slot • 100 Pin Expansion Interface NOTE Performance specifications are nominal and subject to change wi thout notice.
E - 2 Workabout Pro4 (Windows Embedded CE 6.0) User Manual • Dedicated USB port •Audio port Camera (optional) • Optional colour, 8Mpixel, autofocus, 4X digital zoom, Bright L ED flash, video capable Environmental • Standard Operating temperature: -20° C to +50° C (-4° F to +12 2° F) • Storage temperature: -40° C to +60° C (-40° F to +140° F) • Humidity: 5% to 95% non-condensing • IP Sealing: IP65, IEC 60529 • Drop rating: 1.5m (5 ft), 26 d rops to polished concrete (powered with options and acc essories), multiple 1.8m (6 ft) drops to polished concrete Regulatory Approvals • Worldwide Safety, EMC, RF, Laser approvals • CE Mark • E Mark (vehicle cradles) • RoHS compliant • WEEE compliant • REACH compliant Battery Specifications Rechargeable Lithium-ion Battery Electrical Specifications NOTE The electrical specifications app ly for ambient temperature TAMB of 0° to +40°C unless otherwise stated. ItemDescriptionSpecificationsRemark 1 Interface Chipset Maxim DS2762 - 2 Rated Voltage 3.7 VTypical 10 Charging Temperature 0° C to 40° C Typical