Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Here you can view all the pages of manual Motorola Wing 5 Manual. The Motorola manuals for Wireless are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 591

PROFILES 7 - 65
7.1.21.1 address
nat-pool
Configures NAT pool IP addresses
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
address [|range]
address range  
Parameters
• address [|range  
Examples
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#address range 172.
16.10.2 172.16.10.8
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#s...

Page 592

7 - 66 WiNG CLI Reference Guide
7.1.21.2 no
nat-pool
Negates a command or sets its default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no address
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with 
the command getting negated.
Examples
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#no address...

Page 593

PROFILES 7 - 67
7.1.22 interface
Creating Profiles
Selects an interface to configure
This command is used to enter the interface configuration mode for the specified physical wireless controller SVI interface. 
If the VLANx (SVI) interface does not exist, it’s automatically created.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
interface [|fe |ge |me1|port-channel|radio [1|2|3]|
up1|vlan |wwan1|xge ]...

Page 594

7 - 68 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#interface vlan 44
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan44)#?
SVI configuration commands:
  crypto               Encryption module
  description          Vlan description
  dhcp-relay-incoming  Allow on-board DHCP server to respond to relayed DHCP
                       packets on this interface
  ip                   Interface Internet Protocol config commands
  no                   Negate a command or...

Page 595

PROFILES 7 - 69
7.1.23 Interface Config Instance
Use the (config-profile-default-RFS7000) instance to configure the Ethernet, VLAN and tunnel associated with the 
wireless controller.
To switch to this mode, use the following command:
rfs7000-37FABE(config-profile-default-RFS7000)#interface [|fe |
ge |me1|port-channel |radio [1|2|3]|up1|vlan |wwan1]
rfs7000-37FABE(config-profile-default-RFS7000)# ge 1
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#?
Interface Configuration commands:
  cdp...

Page 596

7 - 70 WiNG CLI Reference Guide
shutdownDisables the selected interfacepage 7-82
spanning-treeConfigures spanning tree parameterspage 7-83
speedSpecifies the speed of a FastEthernet or GigabitEthernet portpage 7-86
switchportSets interface switching mode characteristicspage 7-87
useDefines the settings to use with this commandpage 7-89
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and exits the...

Page 597

PROFILES 7 - 71
7.1.23.1 cdp
Interface Config Instance
Enables CDP on wireless controller ports
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
cdp [transmit|receive]
Parameters
• cdp [receive|transmit]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#cdp transmit
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
Related Commands
transmit Enables CDP packet snooping on an interface
receive...

Page 598

7 - 72 WiNG CLI Reference Guide
7.1.23.2 channel-group
Interface Config Instance
Configures channel group commands
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
channel-group 
Parameters
• channel-group 
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#channel-group 1
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context...

Page 599

PROFILES 7 - 73
7.1.23.3 description
Interface Config Instance
Defines an interface description
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
description [|]
Parameters
• description [|]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#description “This is 
GigabitEthernet interface for Royal King”
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#...

Page 600

7 - 74 WiNG CLI Reference Guide
7.1.23.4 dot1x
Interface Config Instance
Configures 802.1X authentication settings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
dot1x username  password [0 |2 |]
Parameters
• dot1x [username  password [0 |2 |]]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#dot1x username Bob password 
motorola
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context...

Start reading Motorola Wing 5 Manual
All Motorola manuals