Motorola Wing 5 Manual

PROFILES 7 - 15
7.1.8 bridge commands
Creating Profiles
Configures Ethernet bridging parameters
Command Description Reference
bridgeConfigures Ethernet bridging parameterspage 7-16 

7 - 16 WiNG CLI Reference Guide
7.1.8.1 bridge
bridge commands
Configures VLAN Ethernet bridging parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
bridge vlan 
Parameters
• bridge vlan 
Usage Guidelines
Creating customized filter schemes for bridged networks limits the amount of unnecessary traffic processed and 
distributed by the bridging equipment.
If a bridge does not hear Bridge Protocol Data Units...

PROFILES 7 - 17
7.1.8.2 bridge-vlan-mode commands
bridge commands
Table 7.2 summarizes bridge VLAN mode commands
Table 7.2Bridge VLAN Mode Commands
Command Description Reference
bridging-modeConfigures how packets on this VLAN are bridgedpage 7-18
descriptionDefines VLAN descriptionpage 7-19
edge-vlanEnables edge VLAN modepage 7-20
ipConfigures IP componentspage 7-60
noNegates a command or sets its default valuespage 7-24
stateful-packet-
inspection-12Enables stateful packet inspection in the layer 2...

7 - 18 WiNG CLI Reference Guide
7.1.8.2.1 bridging-mode
bridge-vlan-mode commands
Configures how packets are bridged on the selected VLAN
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
bridging-mode [auto|isolated-tunnel|local|tunnel]
Parameters
• bridging-mode [auto|isolated-tunnel|local|tunnel]
Examples
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#bridging-mode isolated-
tunnel...

PROFILES 7 - 19
7.1.8.2.2 description
bridge-vlan-mode commands
Sets a VLAN bridge description
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
description 
Parameters
• description 
Examples
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#description “This is a 
description for the bridged VLAN”
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#show context
 bridge vlan 1
  description...

7 - 20 WiNG CLI Reference Guide
7.1.8.2.3 edge-vlan
bridge-vlan-mode commands
Enables edge VLAN mode. In the edge VLAN mode, a protected port does not forward traffic to another protected port on 
the same wireless controller.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
edge-vlan
Parameters
None
Examples
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#edge-vlan
rfs7000-37FABE(config-profile...

PROFILES 7 - 21
7.1.8.2.4 ip
bridge-vlan-mode commands
Configures VLAN bridge IP components
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ip [arp|dhcp|igmp]
ip [arp|dhcp] trust
ip igmp snooping {mrouter|querier|unknown-multicast-fwd}
ip igmp snooping {mrouter [interface |learn pim-dvmrp]}
ip igmp snooping {querier {address |max-response-time |
timer expiry |version }}
Parameters
• ip [arp|dhcp] trust
• ip igmp...

7 - 22 WiNG CLI Reference Guide
• ip igmp snooping {querier {address |max-response-time |
timer expiry |version }}
mrouter Optional. Configures multicast router parameters
interface  Configures multicast router interfaces
  – Specify a comma-separated list of interface names.
learn pim-dvmrp Configures multicast router learning protocols
 pim-dvmrp – Enables Protocol-Independent Multicast (PIM) and 
Distance-Vector Multicast Routing Protocol (DVMRP) snooping of packets
ip Configures VLAN bridge IP...

PROFILES 7 - 23
Examples
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#ip arp trust
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#ip dhcp trust
rfs7000-37FABEconfig-profile default-RFS7000-bridge-vlan-1)#
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#ip igmp snooping mr
outer interface ge1 ge2
rfs7000-37FABE(config-profile default-RFS7000-bridge-vlan-1)#
rfs7000-37FABE(config-profile...

7 - 24 WiNG CLI Reference Guide
7.1.8.2.5 no
bridge-vlan-mode commands
Negates a command or reverts settings to their default. The no command, when used in the bridge VLAN mode, negates 
the VLAN bridge settings or reverts them to their default.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [bridging-mode|description|edge-vlan|ip|stateful-packet-inspection-l2|use]
no ip [arp|dhcp|igmp]
no ip [arp|dhcp]...