Motorola Wing 5 Manual

PROFILES 7 - 5
7.1.1 aaa
Creating Profiles
Configures VPN Authentication, Authorization, and Accounting (AAA) settings on the Remote Authentication Dial-in User 
Service (RADIUS) server
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
aaa vpn-authentication [primary|secondary]  key [0 |2 |] 
{authport }
Parameters
• aaa vpn-authentication [primary|secondary]  key [0 |2 |] 
{authport }
Usage Guidelines
Use an AAA...

7 - 6 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#aaa vpn-authentication secondary
172.16.10.1 key symbol2011 authport 1025
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#show context
profile rfs7000 default-rfs7000
 autoinstall configuration
 autoinstall firmware
 crypto isakmp policy default
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 aaa vpn-authentication secondary 172.16.10.1 key 0 symbol2011...

PROFILES 7 - 7
7.1.2 adopted-mode
Creating Profiles
Sets device in adopted mode. This command is applicable only to AP621s. This mode configures the AP to free some of its 
onboard memory so more IP routes and firewall flows can be configured on this low memory access point. By default, an 
AP621 starts up in the stand alone mode. In the standalone mode, the AP621 supports up to 460 routes and 50 firewall 
flows. When the adoption mode is changed, the AP621 supports up to 1000 routes and 75 firewall...

7 - 8 WiNG CLI Reference Guide
7.1.3 ap-upgrade
Creating Profiles
Enables an automatic firmware upgrade on an adopted access point
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ap-upgrade [auto|count]
ap-upgrade auto {(ap621|ap650|ap6511|ap6521|ap6532|ap71xx)}
ap-upgrade count 
Parameters
• ap-upgrade auto {(ap621|ap650|ap6511|ap6521|ap6532|ap71xx)}
• ap-upgrade count 
Examples...

PROFILES 7 - 9
Related Commands
noDisables or reverts settings to their default 

7 - 10 WiNG CLI Reference Guide
7.1.4 ap300
Creating Profiles
Enables the adoption of an AP300 by a profile or wireless controller
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
Syntax
ap300 [ [adopt|deny]|adopt-unconfigured]
Parameters
• ap300 [ [adopt|deny]|adopt-unconfigured]
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#AP300 00-15-70-63-4F-86
rfs7000-37FABE(config-AP300-00-15-70-63-4F-86)#
Related Commands
ap300 Adopts...

PROFILES 7 - 11
7.1.5 arp
Creating Profiles
Configures Address Resolution Protocol (ARP) parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
arp [|timeout]
arp   arpa [|vlan ] {dhcp-server|router}
arp timeout 
Parameters
• arp   arpa [|vlan ] {dhcp-server|router}
• arp timeout 
arp  Configures a static ARP entry for a IPv4 IP address
  – Specify the static IP address.
 Specify the MAC address associated...

7 - 12 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#arp timeout 2000
rfs7000-37FABE(config-profile-default-RFS7000)#show context
profile RFS7000 default-RFS7000
 arp timeout 2000
 no autoinstall configuration
 no autoinstall firmware
 crypto isakmp policy default
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 interface me1
 interface ge1
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
rfs7000-37FABE(config-profile-default-RFS7000)#arp 172.16.10.10...

PROFILES 7 - 13
7.1.6 auto-learn-staging-config
Creating Profiles
Enables automatic recognition of devices pending adoption
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
auto-learn-staging-config
Parameters
None
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#auto-learn-staging-config
rfs7000-37FABE(config-profile-default-RFS7000)#
Related Commands
noDisables or reverts settings to their default 

7 - 14 WiNG CLI Reference Guide
7.1.7 autoinstall
Creating Profiles
Automatically installs firmware image and configuration parameters on to the selected device.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
autoinstall [configuration|firmware|starttime ]
Parameters
• autoinstall [configuration|firmware]
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#autoinstall configuration...