Motorola Wing 5 Manual
Here you can view all the pages of manual Motorola Wing 5 Manual. The Motorola manuals for Wireless are available online for free. You can easily download all the documents as PDF.
Page 621
![Page 621
PROFILES 7 - 95
• ip dhcp client request options all
• ip nat [inside|outside]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip address 10.0.0.1/8
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip nat inside
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip helper-address 172.16
.10.3
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#...](http://img.usermanuals.tech/thumb/52/100713/w300_wing-5-manual-1509563222_d-620.png "Page 621
PROFILES 7 - 95
• ip dhcp client request options all
• ip nat [inside|outside]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip address 10.0.0.1/8
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip nat inside
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip helper-address 172.16
.10.3
rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#...")
PROFILES 7 - 95 • ip dhcp client request options all • ip nat [inside|outside] Examples rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip address 10.0.0.1/8 rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip nat inside rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#ip helper-address 172.16 .10.3 rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#...
Page 622
![Page 622
7 - 96 WiNG CLI Reference Guide
7.1.24.5 no
Interface vlan Instance
Negates a command or sets its default values. The no command, when used in the Config Interface VLAN mode, negates
VLAN interface settings or reverts them to their default values.
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
no [crypto|description|dhcp-relay-incoming|ip|shut-down|use]
no [crypto...](http://img.usermanuals.tech/thumb/52/100713/w300_wing-5-manual-1509563222_d-621.png "Page 622
7 - 96 WiNG CLI Reference Guide
7.1.24.5 no
Interface vlan Instance
Negates a command or sets its default values. The no command, when used in the Config Interface VLAN mode, negates
VLAN interface settings or reverts them to their default values.
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
no [crypto|description|dhcp-relay-incoming|ip|shut-down|use]
no [crypto...")
7 - 96 WiNG CLI Reference Guide 7.1.24.5 no Interface vlan Instance Negates a command or sets its default values. The no command, when used in the Config Interface VLAN mode, negates VLAN interface settings or reverts them to their default values. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax no [crypto|description|dhcp-relay-incoming|ip|shut-down|use] no [crypto...
Page 623
![Page 623
PROFILES 7 - 97
• no ip address [ {secondary}|dhcp|zerconf {secondary}]
• no ip address [helper-address |nat]
• no ip address dhcp client request options all
no ip address Disables interface IP settings
address – Removes IP addresses configured for this interface, depending on the
options used while setting the address
IP/M> {secondary} Specify the interface IP address in the A.B.C.D/M format.
secondary – Optional. Removes the secondary IP address
dhcp Removes IP address obtained using the DHCP...](http://img.usermanuals.tech/thumb/52/100713/w300_wing-5-manual-1509563222_d-622.png "Page 623
PROFILES 7 - 97
• no ip address [ {secondary}|dhcp|zerconf {secondary}]
• no ip address [helper-address |nat]
• no ip address dhcp client request options all
no ip address Disables interface IP settings
address – Removes IP addresses configured for this interface, depending on the
options used while setting the address
IP/M> {secondary} Specify the interface IP address in the A.B.C.D/M format.
secondary – Optional. Removes the secondary IP address
dhcp Removes IP address obtained using the DHCP...")
PROFILES 7 - 97
• no ip address [ {secondary}|dhcp|zerconf {secondary}]
• no ip address [helper-address |nat]
• no ip address dhcp client request options all
no ip address Disables interface IP settings
address – Removes IP addresses configured for this interface, depending on the
options used while setting the address
IP/M> {secondary} Specify the interface IP address in the A.B.C.D/M format.
secondary – Optional. Removes the secondary IP address
dhcp Removes IP address obtained using the DHCP...
Page 624
7 - 98 WiNG CLI Reference Guide Examples rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#no use ip-access-list in rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#no allow-management rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#no crypto map rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#no...
Page 625
PROFILES 7 - 99 7.1.24.6 shutdown Interface vlan Instance Shuts down the selected interface. Use the no shutdown command to enable an interface. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax shutdown Parameters None Examples rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#shutdown rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)# rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#show...
Page 626
7 - 100 WiNG CLI Reference Guide 7.1.24.7 use Interface vlan Instance Specifies an IP access list to use with this VLAN interface Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax use ip-access-list in Parameters • use ip-access-list in Examples rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#use ip-access-list in test rfs7000-37FABE(config-profile-default-RFS7000-if-vlan8)#s...
Page 627
PROFILES 7 - 101 7.1.25 led Creating Profiles Turns LEDs on or off on an access point Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax led Parameters None Examples rfs7000-37FABE(config-profile-default-RFS7000)#led % Error: led configuration not available for this platform rfs7000-37FABE(config-profile-default-RFS7000)# Related Commands noDisables or reverts settings to their default
Page 628
7 - 102 WiNG CLI Reference Guide 7.1.26 legacy-auto-downgrade Creating Profiles Enables device firmware to auto downgrade when legacy devices are detected Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax legacy-auto-downgrade Parameters None Examples rfs7000-37FABE(config-profile-default)#legacy-auto-downgrade rfs7000-37FABE(config-profile-default)# Related Commands noDisables or reverts settings to their default
Page 629
PROFILES 7 - 103
7.1.27 legacy-auto-update
Creating Profiles
Auto updates an AP650 or an AP71XX legacy access point firmware
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
legacy-auto-update {ap650|ap71xx} image
Parameters
• legacy-auto-update {ap650|ap71xx} image
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#legacy-auto-update AP650 image
flash:/ap47d.img...
Page 630
![Page 630
7 - 104 WiNG CLI Reference Guide
7.1.28 lldp
Creating Profiles
Configures Link Layer Discovery Protocol (LLDP) settings
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
lldp [holdtime|med-tlv-select|run|timer]
lldp [holdtime |run|timer ]
lldp med-tlv-select [inventory-management|power-management]
Parameters
• lldp [holdtime |run|timer ]
• lldp med-tlv-select [inventory-management|power-management]
holdtime Sets...](http://img.usermanuals.tech/thumb/52/100713/w300_wing-5-manual-1509563222_d-629.png "Page 630
7 - 104 WiNG CLI Reference Guide
7.1.28 lldp
Creating Profiles
Configures Link Layer Discovery Protocol (LLDP) settings
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
lldp [holdtime|med-tlv-select|run|timer]
lldp [holdtime |run|timer ]
lldp med-tlv-select [inventory-management|power-management]
Parameters
• lldp [holdtime |run|timer ]
• lldp med-tlv-select [inventory-management|power-management]
holdtime Sets...")
7 - 104 WiNG CLI Reference Guide 7.1.28 lldp Creating Profiles Configures Link Layer Discovery Protocol (LLDP) settings Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax lldp [holdtime|med-tlv-select|run|timer] lldp [holdtime |run|timer ] lldp med-tlv-select [inventory-management|power-management] Parameters • lldp [holdtime |run|timer ] • lldp med-tlv-select [inventory-management|power-management] holdtime Sets...
All Motorola manuals