Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Here you can view all the pages of manual Motorola Wing 5 Manual. The Motorola manuals for Wireless are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 641

PROFILES 7 - 115
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#mac-address-table static 00-40-96-B0-
BA-2A vlan1 ge 1
rfs7000-37FABE(config-profile-default-RFS7000)#
Related Commands
vlan  Assigns a static MAC address to a specified VLAN port
  – Specify the VLAN index from 1 - 4094.
interface 
[|ge |
port-channel ]Specifies the interface type. The options are: layer 2 Interface, GigabitEthernet 
interface, and a port channel interface
  – Specify the layer 2 interface name.
 ge – Specifies a...

Page 642

7 - 116 WiNG CLI Reference Guide
7.1.33 mint
Creating Profiles
Configures MiNT protocol commands
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
mint [dis||level|link|mlcp|spf-latency]
mint dis priority-adjustment 
mint level 1 area-id 
mint link [force|ip|listen|vlan]
mint link force ip  [ level|level] 2 {adjacency-hold-time 
|cost |hello-interval }
mint link listen ip  {adjacency-hold-time |cost |...

Page 643

PROFILES 7 - 117
• mint level 1 area-id 
• mint link force ip  [ level|level] 2 {adjacency-hold-time 
|cost |hello-interval }
• mint link listen ip  {adjacency-hold-time |cost |
hello-interval |level [1|2]}
level 1 Configures local MiNT routing
 1 – Configures local MiNT routing level
area-id  Specifies routing area identifier
  – Specify a value from 1 - 16777215.
link force Creates a MiNT routing link
 force – Forces a MiNT routing link to be created even if not necessary
ip  Creates a MiNT tunnel over...

Page 644

7 - 118 WiNG CLI Reference Guide
• mint link ip  {|adjacency-hold-time |cost |
hello-interval |level [1|2]}
• mint mlcp [IP|vlan
• mint spf-latency 
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#mint level 1 area-id 88
rfs7000-37FABEconfig-profile-default-RFS7000)#mint link ip 1.2.3.4 level 1
rfs7000-37FABE(config-profile-default-RFS7000)#show mint links
 vlan-1 : level 1, cost 10, 1 adjacencies, DIS 70.37.fa.be (self)
rfs7000-37FABE(config-profile-default-RFS7000)#show mint stats
1 L1...

Page 645

PROFILES 7 - 119
7.1.34 misconfiguration-recovery-time
Creating Profiles
Verifies wireless controller connectivity after a configuration is received by an AP
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
misconfiguration-recovery-time 
Parameters
• misconfiguration-recovery-time 
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#misconfiguration-recovery-time 65...

Page 646

7 - 120 WiNG CLI Reference Guide
7.1.35 monitor
Creating Profiles
Enables critical resource monitoring
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
monitor  ping-mode [arp-icmp|arp-only vlan ]
Parameters
• monitor  ping-mode [arp-icmp|arp-only vlan ]
Examples
RFS4000-880DA7(config-critical-resource-policy-testpolicy)#monitor 172.16.10.112 
ping-mode arp-only vlan 1...

Page 647

PROFILES 7 - 121
7.1.36 neighbor-inactivity-timeout
Creating Profiles
Configures neighbor inactivity timeout
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
neighbor-inactivity-timeout 
Parameters
• neighbor-inactivity-timeout 
Examples
rfs7000-37FABE(config-profile-default)#neighbor-inactivity-timeout 500
rfs7000-37FABE(config-profile-default)#
Related Commands
 Sets a neighbor inactivity timeout
  – Specify a...

Page 648

7 - 122 WiNG CLI Reference Guide
7.1.37 neighbor-info-interval
Creating Profiles
Configures the neighbor information exchange interval
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
neighbor-info-interval 
Parameters
• neighbor-info-interval 
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#neighbor-info-interval 6
rfs7000-37FABE(config-profile-default-RFS7000)#
Related Commands
 Sets interval in seconds...

Page 649

PROFILES 7 - 123
7.1.38 no
Creating Profiles
Negates a command or resets values to their default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [aaa|adopted-mode|ap-upgrade|ap300|arp|auto-learn-staging-config|autoinstall|
bridge|cdp|cluster|configuration-persistence|controller|crypto||dscp-mapping|
email-notification|events|interface|ip|led|legacy-auto-downgrade|...

Page 650

7 - 124 WiNG CLI Reference Guide
bridgeConfigures bridge specific commands
cdpEnables Cisco Discovery Protocol (CDP) on a device
clusterConfigures a cluster name
configuration-persistenceEnables persistence of configuration across reloads
controllerConfigures a wireless controller
cryptoConfigures crypto settings
dscp-mappingConfigures an IP DSCP to 802.1p priority mapping for untagged frames
email-notificationConfigures e-mail notification
enforce-versionChecks device firmware versions before attempting...

Start reading Motorola Wing 5 Manual
All Motorola manuals