Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Here you can view all the pages of manual Motorola Wing 5 Manual. The Motorola manuals for Wireless are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 601

PROFILES 7 - 75
7.1.23.5 duplex
Interface Config Instance
Specifies duplex mode for an interface
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
duplex [auto|half|full]
Parameters
• duplex [auto|half|full]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#duplex full
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context
 interface...

Page 602

7 - 76 WiNG CLI Reference Guide
7.1.23.6 ip
Interface Config Instance
Sets the ARP and DHCP components for this interface
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ip [arp|dhcp]
ip [arp [header-mismatch-validation|trust]|dhcp trust]
Parameters
• ip [arp [header-mismatch-validation|trust]|dhcp trust]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#ip dhcp trust...

Page 603

PROFILES 7 - 77
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context
 interface ge1
  description This is GigabitEthernet interface for Royal King
  duplex full
  dot1x username Bob password 0 motorola
  ip dhcp trust
  ip arp header-mismatch-validation
  qos trust dscp
  qos trust 802.1p
  channel-group 1
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
Related Commands
noDisables or reverts interface settings to their default

Page 604

7 - 78 WiNG CLI Reference Guide
7.1.23.7 lldp
Interface Config Instance
Configures Link Local Discovery Protocol (LLDP) parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
lldp [receive|transmit]
Parameters
• lldp [receive|transmit]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#lldp transmit
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
Related Commands
[receive] Enables LLDP...

Page 605

PROFILES 7 - 79
7.1.23.8 no
Interface Config Instance
Negates a command or sets its defaults
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [cdp|channel-group|description|dot1k|duplex|ip|lldp|qos|shutdown|spanning-tree|
speed|switchport|use
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with 
the command getting...

Page 606

7 - 80 WiNG CLI Reference Guide
qosEnables QoS
shutdownDisables the selected interface
spanning-treeConfigures spanning tree parameters
speedSpecifies the speed of a FastEthernet or GigabitEthernet port
switchportSets interface switching mode characteristics
useDefines the settings to use with this command
writeWrites information to memory or terminal

Page 607

PROFILES 7 - 81
7.1.23.9 qos
Interface Config Instance
Enables Quality of Service (QoS)
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
qos trust [802.1p|cos|dscp]
Parameters
• qos trust [802.1p|cos|dscp]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#qos trust dscp
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#qos trust dscp...

Page 608

7 - 82 WiNG CLI Reference Guide
7.1.23.10 shutdown
Interface Config Instance
Shutdown (disables) an interface. The interface is administratively enabled unless explicitly disabled using this command.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
shutdown
Parameters
None
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#shutdown
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
Related...

Page 609

PROFILES 7 - 83
7.1.23.11 spanning-tree
Interface Config Instance
Configures spanning tree parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
spanning-tree [bpdufilter|bpduguard|edgeport|force-version|guard|link-type|mst|
port-cisco-interoperability|portfast]
spanning-tree [edgeport|force-version |guard root|portfast]
spanning-tree [bpdufilter|bpduguard] [default|disable|enable]
spanning-tree link-type...

Page 610

7 - 84 WiNG CLI Reference Guide
• spanning-tree [bpdufilter|bpduguard] [default|disable|enable]
• spanning-tree link-type [point-to-point|shared]
• spanning-tree mst  [cost |port-priority ]
• spanning-tree port-cisco-interoperability [disbale|enable]]
guard root Enables Root Guard for the port. The Root Guard disables reception of superior 
Bridge Protocol Data Units (BPDUs). The Root Guard ensures the enabled port is a 
designated port. If the Root Guard enabled port receives a superior BPDU, it moves...

Start reading Motorola Wing 5 Manual
All Motorola manuals