Motorola Wing 5 Manual

COMMON COMMANDS 5 - 5
5.1.3 end
Common Commands in Controller
Ends and exits the current mode and moves to the PRIV EXEC mode. The prompt changes to rfs7000-37FABE#.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
end
Parameters
None
Examples
rfs7000-37FABE(config)#end
rfs7000-37FABE# 

5 - 6 WiNG CLI Reference Guide
5.1.4 exit
Common Commands
The exit command works differently in its three supported modes. In the Global Config mode, it ends the current mode and 
moves to the previous mode, which is the Priv Exec mode. The prompt changes from (config)# to #. When used in the 
Priv Exec and User Exec modes, the exit command ends the current session and connection to the terminal device.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000...

COMMON COMMANDS 5 - 7
5.1.5 help
Common Commands
Describes the interactive help system
Use this command to access the advanced help feature. Use “?” anytime at the command prompt to access the help topic
Two kinds of help are provided:
 Full help is available when ready to enter a command argument
 Partial help is provided when an abbreviated argument is entered and you want to know what arguments match the 
input (for example show ve?).
Supported in the following platforms:
 AP300
 AP621
 AP650...

5 - 8 WiNG CLI Reference Guide
• help {search [] {detailed|only-show|skip-no|skip-show}}
Examples
rfs7000-37FABE>help search crypto detailed
Found 29 references for “crypto”
      Found 113 references for “crypto”
Mode    : User Exec
Command : show crypto key rsa (|public-key-detail) (|(on DEVICE-NAME))
            Show running system information
             Encryption related commands
              Key management operations
               Show RSA public Keys
               \ Show the public key in PEM...

COMMON COMMANDS 5 - 9
 ## ACCESS-POINT / SWITCH ## ---+
                                |
                                +--> [[ RF-DOMAIN ]]
                                |
                                +--> [[ PROFILE ]]
                                |
                                +--> Device specific parameters (license, serial number, 
hostname)
                                |
                                +--> Configuration Overrides of rf-domain and profile
 ## RF-DOMAIN ## ---+...

5 - 10 WiNG CLI Reference Guide
        : service wireless qos delete-tspec AA-BB-CC-DD-EE-FF tid 
        : service wireless wips clear-event-history
        : service wireless wips clear-mu-blacklist (all|(mac AA-BB-CC-DD-EE-FF))
        : service radio  dfs simulate-radar (primary|extension)
        : service smart-rf run-calibration
        : service smart-rf stop-calibration
        : service cluster manual-revert
        : service advanced-wips clear-event-history
        : service advanced-wips...

COMMON COMMANDS 5 - 11
5.1.6 no
Common Commands
Negates a command or sets its default. Though the no command is common to the User Exec, Priv Exec, and Global Config 
modes, it negates a different set of commands in each mode.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no 
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters...

5 - 12 WiNG CLI Reference Guide
  management-policy         Delete a management policy
  nac-list                  Delete an network access control list
  password-encryption       Disable password encryption in configuration
  profile                   Delete a profile and all its associated
                            configuration
  radio-qos-policy          Delete a radio QoS configuration policy
  radius-group              Local radius server group configuration
  radius-server-policy      Remove...

COMMON COMMANDS 5 - 13
5.1.7 revert
Common Commands
Reverts changes made to their last saved configuration
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
revert
Parameters
None
Examples
rfs7000-37FABE>revert
rfs7000-37FABE> 

5 - 14 WiNG CLI Reference Guide
5.1.8 service
Common Commands
Service commands are used to view and manage wireless controller configurations in all modes. The service commands 
and their corresponding parameters vary from mode to mode. The User Exec Mode and Priv Exec Mode commands provide 
same functionalities with a few minor changes. The Global Config service command sets the size of history files. It also 
enables viewing of CLI tree of the current mode.
Supported in the following platforms:...