Motorola Wing 5 Manual

SHOW COMMANDS 6 - 3
mac-access-list-
statsDisplays MAC access list statisticspage 6-55
mac-address-tableDisplays MAC address table entriespage 6-56
mintDisplays MiNT protocol configuration commandspage 6-57
nocDisplays Noc-level informationpage 6-60
ntpDisplays Network Time Protocol (NTP) informationpage 6-63
password-
encryptionDisplays password encryption statuspage 6-64
powerDisplays Power over Ethernet (PoE) informationpage 6-65
remote-debugDisplays remote debug session datapage 6-66
rf-domain-...

6 - 4 WiNG CLI Reference Guide
6.1.1 show
show commands
The show command displays the following information:
 A device’s current configuration
 A device’s start up configuration
 A device’s current context configuration, such as profiles and policies
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show 
Parameters
None
Examples
The following examples list the show commands in the different modes:
GLOBAL CONFIG...

SHOW COMMANDS 6 - 5
  ip                     Internet Protocol (IP)
  ip-access-list-stats   IP Access list stats
  licenses               Show installed licenses and usage
  lldp                   Link Layer Discovery Protocol
  logging                Show logging information
  mac-access-list-stats  MAC Access list stats
  mac-address-table      Display MAC address table
  mint                   MiNT protocol
  noc                    Noc-level information
  ntp                    Network time protocol...

6 - 6 WiNG CLI Reference Guide
  password-encryption    Pasword encryption
  power                  Show power over ethernet command
  reload                 Scheduled reload information
  remote-debug           Show details of remote debug sessions
  rf-domain-manager      Show RF Domain Manager selection details
  role                   Role based firewall
  running-config         Current operating configuration
  session-changes        Configuration changes made in this session
  session-config...

SHOW COMMANDS 6 - 7
  timezone               The timezone
  version                Display software & hardware version
  wireless               Wireless commands
  wwan                   Display wireless WAN Status
rfs7000-37FABE>
rfs7000-37FABE>show wireless ap configured
--------------------------------------------------------------------------
 IDX       NAME           MAC            PROFILE       RF-DOMAIN   ADOPTED-BY
--------------------------------------------------------------------------
1...

6 - 8 WiNG CLI Reference Guide
6.1.2 adoption
show commands
The adoption command is common to all three modes. It displays information related to APs adopted by a wireless 
controller.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show adoption [config-errors|history|info|offline|pending|status]
show adoption [config-errors |history {on }|
info {on }|offline|pending {on }|
status {on }]
Parameters
• show...

SHOW COMMANDS 6 - 9
Examples
rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#show adoption offline
--------------------------------------------------------------------------          
MAC              HOST-NAME           TYPE           RF-DOMAIN
--------------------------------------------------------------------------
 00-15-70-88-9E-C4   AP7131-889EC4     AP7131           default
 11-22-33-44-55-66   AP650-445566      AP650           default...

6 - 10 WiNG CLI Reference Guide
6.1.3 advanced-wips
show commands
Displays advanced Wireless Intrusion Prevention Policy (WIPS) settings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show advanced-wips [configuration|stats]
show advanced-wips configuration [events {thresholds}|terminate-list]
show advanced-wips stats [ap-table|client-table|connected-sensors|
event-history|server-listening-port]
show...

SHOW COMMANDS 6 - 11
• show advanced-wips stats [detected-aps|detected-clients-for AP ] 
{[neighboring|sanstioned|unsanctioned]}
Examples
rfs7000-37FABE(config)#show advanced-wips configuration events
+------+----+---------------------------------------------+----------+----
|POLICY|SLNO|NAME|AUTHORIZED|UNAUTHORIZED|NEIGHBORING|
+------+----+---------------------------------------------+----------+----
Trigger-S: Trigger against Sanctioned devices enabled(Y)/disabled(N)
Trigger-U: Trigger against...

6 - 12 WiNG CLI Reference Guide
6.1.4 ap-upgrade
show commands
Displays AP firmware image upgrade information
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show ap-upgrade [history {on }|load-image-status|status 
{on [|]}|versions {on }]
Parameters
• show ap-upgrade [history {on }|load-image-status|status 
{on [|]|versions {}]
ap-upgrade Displays AP firmware upgrade details
history 
{on }Displays AP firmware...