Motorola Wing 5 Manual

COMMON COMMANDS 5 - 35
Syntax (Global Config Mode)
service [set|show cli]
service set [command-history |upgrade-history |
reboot-history ] {on }
Parameters (Global Config Mode)
• service set [command-history |upgrade-history |reboot-history ] {on }
• service show cli
Examples
rfs7000-37FABE>service cli-tables-skin stars
rfs7000-37FABE>
rfs7000-37FABE>service pktcap on interface vlan 2
Capturing up to 50 packets. Use Ctrl-C to abort.
rfs7000-37FABE>service show cli
User Exec mode:  +-do
+-help [help]...

5 - 36 WiNG CLI Reference Guide
rfs7000-37FABE>service show general stats on rfs7000-37FABE
Current Fan Speed: 6540 Minimum Fan Speed: TBD Hysteresis: TBD
Sensor 1 Temperature: 31C
Sensor 2 Temperature: 55C
Sensor 3 Temperature: 29C
Sensor 4 Temperature: 28C
Sensor 5 Temperature: 26C
Sensor 6 Temperature: 28C
rfs7000-37FABE>
rfs7000-37FABE>service wireless wips clear-mu-blacklist mac 11-22-33-44-55-66
rfs7000-37FABE>
rfs7000-37FABE#service signal kill testp
Sending a kill signal to testp
rfs7000-37FABE#...

COMMON COMMANDS 5 - 37
Trace the route to HOST
Options:
        -F      Set the dont fragment bit
        -I      Use ICMP ECHO instead of UDP datagrams
        -l      Display the ttl value of the returned packet
        -d      Set SO_DEBUG options to socket
        -n      Print hop addresses numerically rather than symbolically
        -r      Bypass the normal routing tables and send directly to a host
        -v      Verbose
        -m max_ttl      Max time-to-live (max number of hops)
        -p...

5 - 38 WiNG CLI Reference Guide
Sensor 5 Temperature 26.0 C
Sensor 6 Temperature 28.0 C
rfs7000-37FABE>service show info on rrfs7000-37FABE
7.7M out of 8.0M available for logs.
9.4M out of 10.0M available for history.
19.2M out of 20.0M available for crashinfo.
List of Files:
cfgd.log                                5.7K    Jul 28 17:17
fmgr.log                                221     Jul 27 12:40
messages.log                            1.0K    Jul 27 12:41
startup.log                             52.3K...

COMMON COMMANDS 5 - 39
--------------------------------------------------------------------------------
           AP-MAC                      FIELD                     VALUE
--------------------------------------------------------------------------------
  00-15-70-37-FA-BE          is_manager                   True
  00-15-70-37-FA-BE          last_stats_upload            107802.617188
  00-15-70-37-FA-BE          manager_mint_id              70.37.FA.BE
  00-15-70-37-FA-BE          max_pull_time...

5 - 40 WiNG CLI Reference Guide
5.1.9 show
Common Commands
Displays specified system component settings. There are a number of ways to invoke the show command:
 When invoked without any arguments, it displays information about the current context. If the current context contains 
instances, the show command (usually) displays a list of these instances.
 When invoked with the display parameter, it displays information about that component.
Supported in the following platforms:
 AP300
 AP621
 AP650...

COMMON COMMANDS 5 - 41
Examples
rfs7000-37FABE#show ?
  adoption               Display information related to adoption to wireless
                         controller
  advanced-wips          Advanced WIPS
  ap-upgrade             AP Upgrade
  boot                   Display boot configuration.
  captive-portal         Captive portal commands
  cdp                    Cisco Discovery Protocol
  clock                  Display system clock
  cluster                Cluster Protocol
  commands...

5 - 42 WiNG CLI Reference Guide
5.1.10 write
Common Commands
Writes the system running configuration to memory or terminal
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
write [memory|terminal]
Parameters
• write [memory|terminal]
Examples
rfs7000-37FABE>write memory
[OK]
rfs7000-37FABE>
rfs7000-37FABE>write terminal
!
! Configuration of RFS7000 version 5.2.0.0-048B
!
! version 2.1
!
!
smart-rf-policy default...

CHAPTER 6 SHOW COMMANDS
Show commands display information about a configuration setting or display statistical information. Use this command to 
see the current running configuration as well as the start-up configuration. The show command also displays the 
configuration of the current context.
This chapter describes the ‘show’ CLI commands used in the USER EXEC, PRIV EXEC, and GLOBAL CONFIG modes. 
Commands entered in either USER EXEC mode or PRIV EXEC mode are referred to as EXEC mode commands. If a...

6 - 2 WiNG CLI Reference Guide
6.1 show commands
Table 6.1 summarizes show commands
Command Description Reference
showDisplays settings for the specified system componentpage 6-4
adoptionDisplays information related to wireless controller adoptionpage 6-8
advanced-wipsDisplays advanced WIPS settingspage 6-10
ap-upgradeDisplays access point software image upgrade informationpage 6-12
bootDisplays a device boot configurationpage 6-14
captive-portalDisplays WLAN hotspot functionspage 6-15
cdpDisplays a...