Motorola Wing 5 Manual

COMMON COMMANDS 5 - 25
• service radio  dfs simulate-radar [extension|primary]
• service radius test [|]    {wlan  
ssid  {(on )}}
verbose Optional. Provides verbose output
write Captures packets to a specified file. Provide the file name and location in the following 
format:
FILE – flash:/path/file
           cf:/path/file
           usb1:/path/file
           usb2:/path/file
           nvram:startup-config
URL – tftp://[:port]/path/file
           ftp://:@[:port]/path/file...

5 - 26 WiNG CLI Reference Guide
• service radius test [|]     
 {wlan  ssid  {(on )}}
• service set validation-mode [full|partial] {on }
• service show advanced-wips stats [ap-table|client-table|
connected-sensors-status|termination-entries]
• service show captive-portal [servers|user-cache] {on }
radius test Tests a RADIUS server account
 test – Tests the RADIUS server account with user parameters
[|] Sets the IP address or hostname of the RADIUS server
  – Specify the RADIUS server’s IP address.
  –...

COMMON COMMANDS 5 - 27
• service show [cli|configuration-revision|mac-vendor |noc diag|
snmp session|xpath-history]
• service show [command-history|crash-info|info|mem|process|reboot-histroy|
startup-log|sysinfo|top|upgrade-history|watchdog] {on }
user-cache Displays cached user details for a captive portal
on  Optional. Displays server information or cached user details on a specified device
  – Specify the name of the AP or wireless controller.
show Displays running system statistics based on the...

5 - 28 WiNG CLI Reference Guide
• service show dhcp-lease {|on|vlan } {(on )} 
• service show diag [led-staus|stats] {(on )}]
• service show mint adopted-devices {(on )}]
• service show pm {history {(on )}}]
watchdog Displays the device’s watchdog status
on  The following parameters are common to all of the above:
 on  – Optional. Displays information for a specified device. If no 
device is specified, the system displays information for the logged device
  – Specify the name of the AP or wireless...

COMMON COMMANDS 5 - 29
• service show rf-domain-manager diag {( {(on )}}]
• service show wireless [aaa-stats|credential-cache|dns-cache] {on }]
• service show wireless [ap300 |neighbors|vlan-usage] {on }]
history Optional. Displays process change history (the time at which the change was 
implemented, and the events that triggered the change)
on  Optional. Displays process change history for a specified device. If no device is 
specified, the system displays information for the logged device.
  – Specify...

5 - 30 WiNG CLI Reference Guide
• service show wireless client proc [info|stats] { {(on 

COMMON COMMANDS 5 - 31
• service smart-rf interactive-calibration-result [discard|replace-current-
config|write-to-configuration] {on }]
• service wireless client beacon-request  mode [active|passive|table] ssid 
[|any] channel-report [|none] {on }]
interactive-calibration Enables interactive Smart RF calibration
run-calibration Starts a new Smart RF calibration process
save-config Saves Smart RF configuration on all device, and also saves the history on the domain 
manager
stop-calibration Stops Smart...

5 - 32 WiNG CLI Reference Guide
• service wireless qos delete-tspec  tid 
• service wireless wips clear-client-blacklist [all|mac ]
• service wireless wips clear-event-history {on 

COMMON COMMANDS 5 - 33
Syntax (Privilege Exec Mode)
service [advanced-wips|clear|cli-tables-expand|cli-tables-skin|cluster|copy|
locator|mint|noc|pktcap|pm|radio|set|show|signal|smart-rf|start-shell||wireless]
service copy tech-support [FILE|URL]
service clear [ap-upgrade|command-history|crash-info|noc|reboot-history|
unsanctioned|upgrade-history|wireless]
service mint [clear [lsp-db|mlcp
]|debug-log [flash-and-syslog|flash-only]|
expire [lsp|spf]|flood [csnp|lsp]|silence]
service signal [abort |kill ]...

5 - 34 WiNG CLI Reference Guide
• service pm stop {on }
• service show last-passwd
• service signal [abort |kill ]
• service start-shell
debug-log 
[flash-and-syslog|
flash-only]Enables debug message logging
 flash-and-syslog – Logs debug messages to the flash and syslog files
 flash-only – Logs debug messages to the flash file only
expire [lsp|spf] Forces expiration of LSP and recalculation of Shortest Path First (SPF)
 lsp – Forces expiration of LSP
 spf – Forces recalculation of SPF
flood [csnp|lsp]...