Motorola Mc9500k Manual

Accessories 8 - 11
Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger.
The Four Slot Battery Charger:
Simultaneously charges up to four MC9500-K batteries.
Mounts on a wall or desk using the appropriate mounting bracket.
Battery Charging
To charge a battery:
1.Ensure that the charger is connected to power.
2.Insert a battery into a battery charging slot and gently press the battery into the slot to ensure proper contact.
Figure 8-8    Four Slot Battery Charger
The...

8 - 12 MC9500-K Mobile Computer User Guide
Vehicle Cradle
This section describes how to use a vehicle cradle with the MC9500-K. For cradle installation and communication 
setup procedures refer to the VCD9500 Vehicle Cradle Quick Reference Guide.
Once installed in a vehicle, the cradle:
holds the MC9500-K securely in place
provides power for operating the MC9500-K
re-charges the battery in the MC9500-K.
Charging the MC9500-K Battery
Insert the MC9500-K into the vehicle cradle with the display facing...

Accessories 8 - 13
Vehicle Battery Charger
This section describes how to use the Vehicle Battery Charger.
Charging the Battery
To charge a spare battery:
1.Ensure that the charger is connected to power.
2.Insert the spare battery into the slot to begin charging.
Figure 8-10    Vehicle Battery Charger
The charging status is indicated on the front of the battery. See Table 2-7 on page 2-8 for charging status 
indications. The 4800 mAh battery fully charges in less than six hours.
To remove the battery,...

8 - 14 MC9500-K Mobile Computer User Guide
Magnetic Stripe Reader
This section describes how to set up and use the snap-on (Magnetic Stripe Reader (MSR) with the MC9500-K. The 
MSR snaps on to the back of the MC9500-K and removes easily when not in use.
When attached to the MC9500-K, the MSR allows the MC9500-K to capture data from magnetic stripe cards. To 
download sample MSR data capture software, visit the Support Central web site.
To charge to MC9500-K with the MSR attached, 
Attaching and Removing...

Accessories 8 - 15
4.Swipe the magnetic stripe card through the MSR, with the magnetic stripe on the card facing away from the 
MC9500-K. Swipe the card in either direction, up and down or down and up. For best results, gently press the 
card against the back of the MSR while swiping to ensure contact with the reader.
Figure 8-12    Swipe Card through MSR
5.The application indicates if the data has been read correctly. 

8 - 16 MC9500-K Mobile Computer User Guide
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection 
capabilities.
The following communication/charge cables are available:
USB/Charge cable
Provide the MC9500-K with operating and charging power when used with the Motorola approved power 
supply.
Synchronize information between the MC9500-K and a host computer. With customized or third party 
software, it can also synchronize the MC9500-K with...

Accessories 8 - 17
Figure 8-15    Auto Charge Cable
Figure 8-16    Cable Installation
Battery Charging and Operating Power
The communication/charge cables can charge the MC9500-K battery and supply operating power.
To charge the MC9500-K battery:
1.Connect the cable power input connector to the Motorola approved power source.
2.Align the cleat on the cable with the interface pocket on the back of the MC9500-K.
The MC9500-K amber Battery Status LED indicates the MC9500-K battery charging status. The 4800...

8 - 18 MC9500-K Mobile Computer User Guide 

Chapter 9 Maintenance & Troubleshooting
Introduction
This chapter includes instructions on cleaning and storing the MC9500-K, and provides troubleshooting solutions 
for potential problems during MC9500-K operation.
Maintaining the MC9500-K
For trouble-free service, observe the following tips when using the MC9500-K:
Do not scratch the screen of the MC9500-K. When working with the MC9500-K, use the supplied stylus or 
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual...

9 - 2 MC9500-K Mobile Computer User Guide
A screen protector is applied to the MC9500-K. Motorola recommends using this to minimize wear and tear. 
Screen protectors enhance the usability and durability of touch screen displays. Benefits include:
Protection from scratches and gouges
Durable writing and touch surface with tactile feel
Abrasion and chemical resistance
Glare reduction
Keeping the device’s screen looking new
Quick and easy installation.
Removing the Screen Protector
A screen protector is...