Motorola Mc9500k Manual

Using Bluetooth 7 - 11
e.Click Connect. The computer connects to the device via Bluetooth.
8.To verify, on the PC or laptop, launch Internet Explorer and open a web site.
9.To end dial-up networking, on the MC9500-K tap Disconnect.
Hands-free Services
To connect to a Bluetooth headset:
1.Ensure that Bluetooth is enabled and discoverable on both devices.
2.Ensure that the two devices are within 30 feet (10 meters) of one another.
3.Ta p Start > Settings > Connections > Bluetooth icon.
4.Tap New device....

7 - 12 MC9500-K Mobile Computer User Guide
Figure 7-11    WWAN Bluetooth Audio Notification Dialog Box
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the 
application that will use the connection to the correct serial port.
To establish a serial port connection:
1.Ensure that Bluetooth is enabled and discoverable on both devices.
2.Ensure that the two devices are within 30 feet (10 meters) of one another.
3.Ta p  Start >...

Using Bluetooth 7 - 13
ActiveSync Using Serial Port Services
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable 
connection. You must configure the application that will use the connection to the correct serial port.
To set up a Bluetooth ActiveSync connection:
Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device.
1.Ensure that Bluetooth is enabled and discoverable on both devices.
2.Ensure that the...

7 - 14 MC9500-K Mobile Computer User Guide
Figure 7-13    ActiveSync Connection Settings
11 .On the Allow connections to one of the following drop-down list, select the COM port with the number you 
noted earlier.
12.On the MC9500-K, tap Start > Programs > ActiveSync.
13.Ta p  Menu > Connect via Bluetooth.
Synchronization is automatically initiated. The ActiveSync icon appears on the lower right corner of the Today 
screen.
If an Authentication is required, the Enter Passcode screen appears, type an...

Using Bluetooth 7 - 15
8.A dialog box appears requesting if you want to transfer contacts to the car kit.
9.Select Ye s or No.
10.If Ye s is selected, contacts from the MC9500-K are transferred to the car kit.
Dial-Up Networking Services
Dial-up networking allows the user to connect a PC or laptop to the MC9500-K and use the MC9500-K as a modem 
to connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password 
and...

7 - 16 MC9500-K Mobile Computer User Guide
5.Ta p  Add new device. The MC9500-K begins searching for discoverable Bluetooth devices in the area.
6.Select a stereo headset from the list.
7.Ta p  Next. The Enter Passcode window appears. Refer to the device’s User Manuals for more information.
8.Ta p  Connect. The MC9500-K connects to the stereo headset.
For stereo headsets that can use hands-free services, connect to the hands-free service after connecting to the 
A2DP service:
1.Ta p  Start > Settings >...

Using Bluetooth 7 - 17
Using StoneStreet One Bluetooth Stack
The following sections provide information on using the StoneStreet One Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the 
radio is off, other Bluetooth devices cannot see or connect to the MC9500-K. Turn on the Bluetooth radio to 
exchange information with other Bluetooth devices (within range). Communicate only...

7 - 18 MC9500-K Mobile Computer User Guide
Wizard Mode shows the devices and services in a simple Favorites view created by following the step-by-step 
wizard.
Explorer Mode
The Explorer Mode window is easy to navigate and provides greater control to users familiar with Bluetooth. The 
menu bar provides quick access to the options and tools used to connect to devices. To access Explorer Mode, tap 
View > Explorer Mode.
Figure 7-16    Explorer Mode Window
You can also use the “tap and hold” technique to...

Using Bluetooth 7 - 19
5.Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.
6.Ta p  Menu > New Connection.The New Connection Wizard appears.
Figure 7-17    BTExplorer Window
7.Select Explore Services on Remote Device or another from the drop-down list and tap Next.
The following actions are available in the drop-down list (actions may vary depending upon configurations):
Explore Services on Remote Device
Pair with a Remote Device
Active Sync via Bluetooth
Browse Files on...

7 - 20 MC9500-K Mobile Computer User Guide
Figure 7-18    Discover Devices Dialog Box
The discovered devices display in the Select Remote Device window.
Figure 7-19    Select Remote Device Window
9.Select a device from the list and tap Next. The MC9500-K searches for services on the selected Bluetooth 
device.
Figure 7-20    Device Services
NOTEIf the MC9500-K discovers a service but the service is not supported, the service icon is grayed-out.