Mitsubishi Wd8200u Projector User Manual

EN-31
Menu operation
You can make various settings using the displayed menus.
Following 8 menus are displayed.
IMAGE menu (page 33) INSTALLATION 1 menu (page 34) 
FEATURE menu (page 37) SIGNAL menu (page 39)  INSTALLATION 2 menu (page 35) 
MULTI-SCREEN menu (page 36) 
NETWORK menu (page 40) INFORMATION menu (page 41) 
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE1 12 2
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
opt.
0
ENTER
LANGUAGE
ADVANCED MENU
FEATURE...

EN-32
How to set the menus
1.  Press the MENU button. 
t
 5IF
NFOV
TFMFDUJPO
CBS
JT
EJTQMBZFE

IMAGE
1 12 2
opt.
Selectable menus are displayed by icons. (The menu 
icon being selected is displayed on a blue background.) 
The name of the menu being 
selected is displayed.
2. Press the  or  button to select a menu to use.
3.  Press the ENTER button (or  button).
t
 5IF
TFMFDUFE
NFOV
JT
EJTQMBZFE
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE
1 12 2
BRIGHTNESS 0
COLOR...

EN-33
IMAGE menu
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE
1 12 2
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
opt.
IMAGE
ADVANCED MENU
12opt.
NOISE REDUCTION
CTI
INPUT LEVEL
OFFCLOSED CAPTION
OFF
OFF
0
12
0
ENTER
OFF
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. 
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD...

EN-34
INSTALLATION 1 menu
INSTALLATION 1
LENS LOCK
LENS SHIFT LOCK ZOOM/FOCUS LOCK
LENS SHIFT RESETOFF
OFF
COOLING CONDITION
TEST PATTERN
INSTALLATION 1
LAMP MODE
LAMP SELECTSTANDARD
1H/24H
LOW
OFF
STANDARD
0°DUAL
LAMP RELAY
CROSS HATCH
HIGH ALTITUDE MODE
12
STANDBY MODE
IMAGE REVERSE
LENS LOCK
1 12 2opt.1 12 2opt.
ENTER
OK
ITEM SETTING FUNCTION
LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.
LOW Select to moderate the intensity of the lamp. The operating sound is...

EN-35
INSTALLATION 2 menu
REMOTE 1 MODE
FILTER MENU
INSTALLATION 2
AUTO POWER ON
AUTO POWER OFFOFF
ON
BLUE
AUTO
5min
IMAGE CAPTURE
SPLASH SCREEN
DVI LONG CABLE
BACK COLOR
1 12 2opt.
ON
ENTER
ENTER
SETUP
ITEM SETTING FUNCTION
AUTO POWER ON ON / OFF When ON is chosen, the projector is automatically turn on when the power 
cord is plugged in the wall outlet. Choose ON when using the projector 
mounted on the ceiling.
t
 5IF
QSG
6TF
UIF

remote control to turn on the lamp. 
AUTO POWER OFF OFF / 5-60min When...

EN-36
MULTI-SCREEN menu
MULTI-SCREEN
EDGE BLENDING
SETTINGOFF
OFF EDGE ADJUST
COLOR MATCHING
SETTING
MEASURED DATA
MANUAL
MEASURE
1 12 2opt.
ITEM SETTING FUNCTION
EDGE BLENDING OFF Select when using the projector alone.
ON Select when using the projector to configure the multi-screen consisting 
of multiple projectors. 
The following settings in the SETTING become enabled to make the 
overlapped area of the displayed images unnoticeable.
SETTING EDGE ADJUST 
Use to make the overlapped area of the screens...

EN-37
FEATURE menu
LANGUAGE
ADVANCED MENU
FEATURE
ASPECT
PROJECTOR IDNORMAL (FULL)
A
AUTO
English
GROUP ID
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
1 12 2opt.
RESET ALLOK
FEATURE
ADVANCED MENU
SETUP
SCART INPUTAUTO
AUTO
OFF
STANDARD
OFF
2 2
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
OK
LAMP 2 TIME RESET
OK
FILTER TIME RESET
OK
1 1opt.
1.
ITEM SETTING FUNCTION
ASPECT NORMAL (FULL) Input video signal is displayed at the max height (800 pixels) or max 
width (1280...

EN-38
ITEM SETTING FUNCTION
  SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped 
with the SCART terminal that can output RGB signal. SCART 
terminal is used mainly in Europe. Choose OFF normally. (Available 
only for the input signal from the COMPUTER/COMPONENT VIDEO 
IN-1 terminal.)
 LAMP WARNING
STANDARDWhen the lamp operating time exceeds 3000 hours with LAMP 
MODE set to LOW, a warning dialog is displayed.
SHORT TERMWhen the lamp operating time exceeds 3800 hours...

EN-39
SIGNAL menu
R G BR G B
VHA
U
0
100% COMPUTER INPUT
AUTO
OVER SCAN 
HOLD
USER FINE SYNC.
SIGNAL1 12 2
VERT. POSITION 0 MEMORY CALL
RESOLUTION
(MEMORIZE    )AUTO
HORIZ. POSITION
0 TRACKING
opt.1 12 2opt.
SIGNAL
RESOLUTION (MEMORIZE)
VERTICAL 
FREQUENCY
HORIZONTAL 
FREQUENCY
HORIZ. PIXELS
VERT. LINES 
EXECUTE
CANCEL 60.00 Hz
1
48.36 KHz
1024
768
ENTER
0 1024 x 768
OFF
0
SHUTTER(L)0
SHUTTER(LS)
0SHUTTER(RS)
LPF
SIGNAL
USER1 12 2
VERT. SYNC. AUTO
CLAMP WIDTH
0SHUTTER(U)
opt.
1
OK
OK
?
CLAMP POSITION
ON...

EN-40
NETWORK menu
CONTROL SYSTEM
NETWORK PASSWORD
NETWORK1 12 2
NETWORK CERTIFICATION PROJECTOR NAME
IP CONFIG
NETWORK RESET
opt.
STANDARD
NETWORK
IP CONFIG
12opt.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
0. 0. 0. 0 0. 0. 0. 0
0. 0. 0. 0
MAC ADDRESS
12
ENTER
ENTER
OK
ON
ON
ITEM SETTING FUNCTION
PROJECTOR NAME *****... Displays PROJECTOR NAME. Displays PROJECTOR NAME in blank 
when PROJECTOR NAME is not set. (See page 49.)
SET 
Set the name to identify the projector. Enter up to 15 characters...