Mitsubishi Wd8200u Projector User Manual
Here you can view all the pages of manual Mitsubishi Wd8200u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN-21 C. Installing the terminal cover This projector includes a terminal cover. If necessary, install the terminal cover to the projector. 1. Fit two hooks of the terminal cover into the projector. (a) Viewing computer images (continued) VIDEO IN S-VIDEO IN IN-1 (b) You can use the buttons on the operation panel by removing the door of the terminal cover. 3. Remove the door (b) of the terminal cover. Important: tDon’t carry the projector by the terminal cover. t...
Page 22
EN-22 Viewing computer images (continued) D. Projecting images Preparation: t 3FNPWFUIFMFOTDBQ COMPUTER 1, 2 buttons Main power switchPOWER indicator LAMP 2 indicator LAMP 1 indicator DVI-D(HDCP) button ENTER button , , , buttons POWER button , , , buttons COMPUTER/DVI-D button ENTER button ZOOM/FOCUS button LENS SHIFT buttonPOWER button LENS SHIFT button ZOOM/FOCUS button 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. t...
Page 23
EN-23 Viewing computer images (continued) 9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu. 10. Adjust with the or button to get an approximate size. t 8IFOUIF&/5&3CVUUPOJTQSFTTFEXIJMFUIF;00.0$64NFOVJTEJTQMBZFE UIFBEKVTUNFOUNPEFJT switched between FAST and STEP. When FAST is selected, the speed of zoom controlled by the or button becomes fast, and it becomes slow when STEP is selected. 11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of...
Page 24
EN-24 Blanking the screen temporarily (BLANK) The video signal is temporarily muted when the BLANK button is pressed. The screen turns black. You will hear a mechanical shutter sound inside the projector. To cancel muting, press the BLANK button again. AUTO POSITION button When the image supplied from the computer is displaced, carry out the following procedure. 1. Project a bright image containing as many texts and characters as possible. 2. When the screen saver has been enabled, disable it. 3....
Page 25
EN-25 Viewing computer images (continued) Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the screen to be used or your preference. How to change the settings: With the remote control: 1. Press the ASPECT button. t &WFSZUJNFUIF41&$5CVUUPOJTQSFTTFE UIFBTQFDUNPEFDIBOHFTGSPN/03.- 6-- UP/03.- to NORMAL (4:3), to 16:9, to REAL, to FULL, and back to NORMAL...
Page 26
EN-26 Viewing video images Connecting to a video player, etc. 1. Connect one end of a commercially available BNC cable to the VIDEO IN terminal of the projector. 2. Connect the other end of the BNC cable to the video output terminal of the video equipment. When the video equipment is equipped with the S-video output terminal, make the connection as follows: 1. Connect one end of a commercially available S-video cable to the S-VIDEO IN terminal of the projector. 2. Connect the other end of the...
Page 27
EN-27 Viewing video images (continued) Projector + DVD player or HDTV decoder Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER/COMPONENT VIDEO IN-2 terminals. CB(PB) Y CR(PR) B G R DVD player or HDTV decoder COMPUTER/COMPONENT VIDEO IN-2 BNC-RCA connector (option) BNC cable (option) t 5IFUFSNJOBMTOBNFT: 1B, and PR are given as examples of when a HDTV decoder is connected. t...
Page 28
EN-28 Connection (for video equipment having a DVI-D terminal) Equipment having a DVI-D terminal To DVI-D terminal DVI cable (option)COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) t PSDPOOFDUJPOUPUIF%7*%UFSNJOBM VTFBDPNNFSDJBMMZBWBJMBCMF%7*DBCMF t 4PNFDBCMFTNBZOPUCFDPOOFDUFEDPSSFDUMZEFQFOEJOHPOUIFTJ[FBOETIBQFPGUIFJSDPOOFDUPST t 8IFO%7*JTTFMFDUFEBTUIFJOQVUTPVSDF TFUUJOHTPG*/&4:/$ 53$,*/( )0-% FUDBSFVOBWBJMBCMF When you connect this projector and a digital...
Page 29
EN-29 Viewing video images (continued) D. Projecting images Preparation: t 3FNPWFUIFMFOTDBQ COMPUTER 1, 2 buttons Main power switchPOWER indicator LAMP 2 indicator LAMP 1 indicator DVI-D(HDCP) buttonS-VIDEO button VIDEO button VIDEO/HDMI button HDMI button ENTER button , , , buttons POWER button , , , buttonsCOMPUTER/DVI-D button ENTER button ZOOM/FOCUS button LENS SHIFT buttonPOWER button LENS SHIFT button ZOOM/FOCUS button 1. Put the projector into standby mode by pressing the main...
Page 30
EN-30 7. Adjust the position of the projector to keep an appropriate projection distance with which images are projected in their specified sizes. 8. Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page 11.) t 8IFOUIFQSPKFDUPSDBOOPUCFQPTJUJPOFEQFSQFOEJDVMBSMZUPUIFTDSFFO BEKVTUUIFQSPKFDUJPOBOHMF 4FFQBHF 14.) 9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu. 10. Adjust with the or button to get an...