Mitel Voice Processing Solutions Instructions Manual

Cl?5729 
Page 2 of 5 
Release 6.OA and later 
Step 
7. Set the maximum number of message minutes that can accumulate in a queue 
before the queue is sent. 
Select: (T) Total Message Minutes 
Prompt: 
Total Message Minutes [5J: 
Response: The number of minutes that the total messages add up to before the 
queue is sent.. 
8. Select X to exit. 
9. Repeat steps 3 through 8 for the other queue (batch or urgent). 
ED Set Network Queue Time 
10. Reach the Network Queue Start/Stop Times menu. 
11. Select to...

Cl? 5729 
Page 3 of 5 
Release 6.OA and later 
13. If you do not want any time limits on when the local node can originate 
MESA-Net connections on the weekends, set the weekend window to always 
open. 
Select: 
or) Always Open Weekend 
Window 
Pr0mpt: Warning : This will reset the WEEKEND BATCH start 
and stop times so that the window will always be 
open to transmit messages: 
Start time = 12:oo am, 
Stop time = Never 
To define specific times when messages can be 
transmitted and when 
messages will...

Cl? 5729 
Page 4 of 5 
Release G.OA and later 
Step 
17. Set the weekend stop time. 
Select: (I) Weekend Stop Time [Never] 
prompt: Weekend Stop Time [Never]:? 
Response: The time that MESA-Net stops sending the network queue on 
weekends. The time must between 
01 00 am or pm and 12 00 am or 
pm in the format hh mm am or hh mm pm. 
18. Select X to exit. 
19. Repeat steps 11 through 
18 for the other queue (batch or urgent). 
CD Set Network Limits 
20. Reach the Network Queue Limits menu. 
21. If...

CJ? 5729 
Page 5 of 5 
Release 6.OA and later 
Step 
23. Set the maximum of times that MESA-Net will try to set up a connection. 
Select: 
(U) Maximum Call Setup Tries 
Prompt 
Maximum Call Setup Tries? 
Response: 
The number that indicates the number of times MESA-Net will try to 
send a network queue. Each try consists of three call setup attempts. 
24. Set the number of seconds that MESA-Net waits before trying to set up a 
connection after an attempt has failed. 
Select: (V) Call Setup Retry Interval...

rii 
The VoiceMemo software allows you to customize your system to meet the specific 
needs of your site. You do this through Classes of Service (COS), which is a way of 
differentiating what privileges and abilities different mailbox owners have. 
MESA-Net messaging uses the Network Class of Service (NCOS) to control network 
privileges. NCOS settings control whether a mailbox owner can send, give, or 
answer messages over the network. This chapter describes the NCOS features. 
e res 
MESA-Net provides...

Configuring Classes of Service for Networking 
assigned to mailboxes that have network message privileges must 
have exactly the same group definitions on all nodes. 
If the Network Class of Service does not include feature 
001, no GCOS checking 
will be done, that is. a user can send messages to any remote user, regardless of the 
recipient’s Group Class of Service. (Local node interactions are still controlled by 
the GCOS.) 
02 Allow user to make network messages 
This feature allows users, while...

Configuring Cla.sses of Service for Networking 
remote mailbox was not delivered is if the message was made for more than one 
mailbox (either through a distribution list or through the “make multiple” feature), 
and at least one other mailbox on the same node got the message. 
Automatic receipts ensure that the sender is always notified of an undeliverable 
message; however, system users who make many messages often find that the 
automatic receipts feature is more annoying than helpful. An alternative...

Configuring Classes of Service for Networking 
Pre-6.0 hardware and software only support a single compression rate - 18.3 Kbps - 
and cannot accept messages that were recorded with a different compression rate. 
If your MESA-Net network includes AIP systems that have pre-6.0 hardware and 
software and you want all nodes to be able to exchange messages, you must set the 
compression rate on all 6.0 systems to 18.3 Kbps. You must use this setting for all 
messages, names, and greetings. You use feature...

Configuring Classes of Service for Networking 
I 
I 
1 NCOS Number 3 
II NCOS Name Basic Network Service 
; Assign to Mailboxes: 
’ 342 345 346 350 
--------- 
+iEL-___------- 416 
I 
ppp_______________---- 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
I 
q 001 Enable GCOS check across network 
r-l X 002 Allow user to make network messages 
r-l X 003 Allow user to make urgent network messages - 
q X 004 Allow user to give network messages 
q X 005 Allow...