Mitel Voice Processing Solutions Instructions Manual

Configuring Network Queues 
parameters, but the Time Window is overridden by the Message Blocks Used 
threshold. 
Message MessageWaiting Total Message Time 
Count Time Minutes Window Queue 
If the time window is 
closed the message queue 
isn ‘t sent even if;l - 
Full Closed Not sent 
threshold has been rearbed 
If the time winhw opens, 
the 
queue is sent ;fany 
threshold has been 
reached. Full Open 
Sent 
If the message block use 
threshold is reached, the 
queue is sent regardk-ss of 
other...

Configuring Network Queues 
1 Message Block Use Threshold (80-l 00%): 
/ go 
I Maximum Call Setup Tries: 
u 
4 
1 Call Setup Retry Interval (minutes): 
I 70 
I 
I 
I Always Open? @=I Weekends 
i Weekday Start Time (hour:min am/pm): Batch 
1 Weekday Stop Time (hour:min am/pm): Batch 
i Weekend Start Time (hour:min am/pm): Batch 9:OO 
i Weekend Stop Time (hour:min am/pm): Batch 
400 
Urgent 
Urgent 
Urgent 
7:00 
Urgent 6:00 
Message Count Threshold: Batch 10 Urgent 2 
Message Waiting Threshold: Batch 10...

Configuring Network Queues 
assignment of Network Classes of Service that allow the user to send urgent messages 
over the network to prevent users from marking all remote messages urgent.) The 
batch queues and remote queues of each remote node are monitored individually by 
MESA-Net. 
Message Count Threshold: The number of messages, names, greetings, and receipt 
updates that must be waiting in a queue for a certain node before that queue 
becomes ready to send. This threshold is appropriate for sites...

Configuring Network Queues 
Weekday Start Time: Write in the time of day that you want the local node to start 
sending messages on weekdays, provided that at least one of the network queue 
thresholds has been met. 
Weekday Stop Time: Write in the time of day that you want the local node to stop 
sending messages on weekdays. 
Weekend Start Time: Write in the time of day that you want the local node to start 
sending messages on weekends, provided that at least one of the network queue 
thresholds has...

Configuring Network Queues 
When a first attempt at originating a call fails (the node may be busy communicating 
with another node on the system, for example), the node waits the amount of time 
specified by the call setup retry interval before repeating the originating actions. This 
sequence will continue until communications are established or the maximum call 
setup tries threshold has been reached. 
If all attempts to communicate with the destination node fail, all users who sent 
messages to that...

I 
[ Message Block Use Threshold (80-l 00%): 
i Maximum Call Setup Tries: 
/ 
1 Call Setup Retry Interval (minutes): 
I 
I Always Open? Weekdays Weekends 
/ Weekday Start Time (hour:min am/pm): Batch 
i Weekday Stop Time (hour:min am/pm): Batch 
i Weekend Start Time (hour:min am/pm): Batch 
i Weekend Stop Time (hour:min am/pm): Batch 
I 
I Urgent 
Urgent 
Urgent 
Urgent 
i Message Count Threshold: Batch 
1 Message,Waiting Threshold: Batch 
I Total Message Minutes Threshold: Ba Urgent 
Urgent 
Urgent  

Page 1 of 1 
Release 6.OA 
Task Procedure 
et ueues 
Configure the Network Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..~..... 
Cl’ 5729  

Page 1 of 5 
Configure Network Queues VoiceMemo Release 6.06.OA and later 
Use this procedure to configure the network queue parameters, including message 
‘thresholds, time windows, and queue limits. 
step 
Reference 
1. Reach the Modify Network Queue Menu. /lenu Map 13 
ssage Thresholds 
2. Reach the Message Thresholds menu. 
3. Select to modify either the batch queue (B) or the urgent queue (U). 
4. If desired, set the threshold parameters to their default values, otherwise proceed to 
step 5....