Mitel Sx-2000 Llightware 32, Release 1.0 Technicians Handbook

Programming
61
Programming
Moving a Telephone User
Use the MOVE USER command to move a user from one 
telephone to another. Enter the command in the following 
format:
MOVE USER  TO 
MOVE USER  TO 
Stn A = attribute of Station A before the move
Stn B = attribute of Station B before the move
Telephone FeaturesStation AStation B
The following attributes change at both sets:
Name
deleted Stn A, Stn B
Department
deleted Stn A, Stn B
Location
deleted Stn A, Stn B
Default Account Code
deleted Stn A
Personal...

Technician’s Handbook
62
Swapping Users’ Telephones
Use the MOVE SWAP command to swap two users’ 
telephones. Enter the command in the following format:
MOVE SWAP  WITH 
MOVE SWAP  WITH 
Stn A = attribute of Station A before the move
Stn B = attribute of Station B before the move
Telephone FeaturesStation AStation B
The following attributes are exchanged between the sets:
Directory Number Stn B Stn A
Name Stn B Stn A
Department Stn B Stn A
Location Stn B Stn A
Default Account Code Stn B Stn A
Personal...

Programming
63
Programming
Programming Call Rerouting
1. Call Rerouting Always Alternative Assignment form
!For First Always Alternative Number 1
—Leave all values as “Normal”
!For each Always Alternative Number
—Change “No Reroute” to “Reroute” for the 
required originating device(s).
—Enter the directory number to which calls should 
reroute.
2. Call Rerouting First Alternative Assignment form
!For First Alternative Number 1
—Leave all values as “Normal”.
!For other First Alternative Numbers
—If calls...

Technician’s Handbook
64
3. Call Rerouting Second Alternative Assignment
!For Second Alternative Number 1
—Leave all values as “Normal”.
!For other Second Alternative Numbers
—If calls from an originating device type are to 
reroute directly to the Second Alternative in Busy, 
Do Not Disturb, or No Answer conditions, set the 
value to “This” or “Last”.
—Enter the directory number to which calls should 
reroute.
4. Call Rerouting Assignment form
!For each directory number that is affected by Call...

Programming
65
Programming
Programming Trunks
Analog Dial-in Trunk
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. Trunk Circuit Descriptor Assignment form
!There are several Trunk Circuit Descriptor 
Assignment forms. Use the specific form for the type 
of trunk that you are programming, to create a Trunk 
Circuit Descriptor.
2. Trunk Service Assignment form
!Create a trunk service number:
—Assign a class of service.
—Assign a class of...

Technician’s Handbook
66
3. Trunk Assignment form
!Assign the trunk a trunk number, trunk service 
number, and trunk circuit descriptor number.
!Assign the trunk an interconnect number.
4. Trunk Group Assignment form
!For an outgoing trunk, enter the trunk number in the 
desired trunk group.
Analog Non-dial-in Trunk
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. Trunk Circuit Descriptor Assignment form
!There are several Trunk Circuit...

Programming
67
Programming
3. Trunk Assignment form
!Assign the trunk a trunk number, trunk service 
number, and trunk circuit descriptor number.
!Assign the trunk an interconnect number.
4. Trunk Group Assignment form
!For an outgoing trunk, enter the trunk number in the 
desired trunk group.
DISA Dial-in Trunk
1. Miscellaneous Assignment form
!Create a DISA forced account code number 
- or -
!Create a plain DISA number for the dial-in trunk.
2. Independent Account Code Assignment form
!If you are using...

Technician’s Handbook
68
DISA Non-dial-in Trunk
1. Miscellaneous Assignment form
!Create a DISA forced account code number
- or -
!Create a plain DISA number for the non-dial-in trunk.
2. Independent Account Code Assignment form
!If you are using a DISA forced account code number 
for the trunk, create an independent account code 
number and assign it to the appropriate class of 
service and class of restriction.
3. Trunk Service Assignment form
!Select a trunk service number.
!If you are using a DISA...

Programming
69
Programming
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. System Configuration form
!Program a DS1 formatter, CEPT formatter, PRI, 
T1/E1, Universal T1/E1, or R2 card. Note that the 
system will not recognize the card until it is assigned 
a link descriptor in step 3.
2. Link Descriptor Assignment form
!Create a link descriptor number.
3. Digital Link Assignment form
!Assign the link descriptor number to the link. (Until 
you...

Technician’s Handbook
70
7. Trunk Group Assignment form
!For an outgoing trunk, enter the trunk number in the 
desired trunk group.
8. Network Synchronization form
!Enter the PLIDs of the links which will be 
synchronization sources for the system.