Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

1. 
2. Introduction ...................................... 
Fieasonforissue ..................................... 
Ordering Information .................................. 
Warranty ........................................... 
Spares Level ........................................ 
Field-Replacement Procedures ................... 
Precautions ......................................... 
Power Down System .................................. 
Power Up System .................................... 
Replace Printed...

Safely Instructions 
vi 
Issue 1 Revision 0 March 1997  

1 Introduction 
This document contains ordering information and field replacement instructions for the 
Mite1 SX-200@ ML PABX. 
Reason for Issue 
1.1 This document reflects the content of the SX-ZOO ML LIGHTWARETM 16 software 
release. 
Ordering Information 
The ordering information is divided into the following tables: 
l Table l-l lists digital cards and modules required 
l Table l-2 lists spares 
l Table l-3 lists peripheral equipment 
l Table l-4 lists system documentation. 
Note: A complete list of...

Field-Replaceable Units 
. Table 1-l Digital Peripheral Cards (continued) 
Common Name Part Number Comments 
ML only ONS Line Card 9109-Ol O-003-NA For Rotary and DTMF Telephones (12 circuits per 
card) (1 per SX-200 ML system) 
COV Line Card 9109-020-000-SA 6 COV Circuits per card 
OPS Line Card 9109-040-000-SA 6 OPS Circuits per card 
ML only Digital Line Card 9109-012-002-NA 12 DNIC Circuits per card (2 per SX-200 ML system) 
Digital Line Card 9109-012-000-SA 12 DNIC Circuits per card 
9109-012-OOl-NA...

Introduction 
Comments 
Console with tilt LCD display (interfaces to 
Digital Line Card) and English documenta- 
tion 
Console with tilt LCD display (interfaces to 
Digital Line Card) and French documenta- 
tion 
PC-based Attendant Console 
Spare Line Cord for SWERSE7tele- 
phones and for SUPERCONSOLE 7000 
Attendant Consoles (quantity: 10) 
Single line digital telephone set 
Multi-line digital telephone set  Table l-3 Peripheral Equipment 
Marketing Name Part Number 
ACD TELEMARKETER@ Report-...

Field-Replaceable Units 
Table l-4 Documentation 
Marketing Name Part Number Comments 
SX-200 ML LIGHTWARE 16 System Docu- 
I 9109-953-050-NA Contains Technical Documenta- 
mentation 
I tion, covering all features. 
I 
Attendant Console Guide 9109-090-005NA 
I Details Attendant Console oper- 
ation. 
SUPERSET 7000 Attendant Console Guide 
I 911 g-953-01 2-NA Details Attendant Console oper- 
ation. 
I French Attendant Console Guide 1 9108-090-OlO-CA 1 
I 
General Information Guide (CA is French 
version)...

2 Field-Replacement 
Procedures 
Only persons who have successfully completed a MITEL Installation and Maintenance 
training course for the SX-2UO LIGHT and the SX-200 ML PABX should perform re- 
moval and replacement procedures. 
WARNING: INSTRUCTIONS MUST BE FOLLOWED EXPLICITLY WHEN THEY INVOLVE WORK 
WITH AND CHANGES TO THE PRIMARY POWER SUPPLY OF THE UNIT. 
Precautions 
2.1 Observe the following precautions when working on the system, particularly when 
handling PCB cards or using test equipment to...

Field-Replaceable Units 
Power Up System 
2.3 When you have completed Chart 2-2 
l The system will be powered up. 
Chart 2-2 Power Up System 
Step Action Comments 
Power Up System 
1. Plug cabinet line cord into the wail outlet. Turn on 
Bay Power Supply switch. 
2. Replace any covers or barriers that were removed The system is now properly 
previously. Close and lock the door. powered up, and its door is closed 
and locked to prevent unauthorized 
access to equipment. 
Replace Printed Circuit Cards 
2.4...

Field-Replacement Procedures 
Chart 2-3 Replace Printed Circuit Cards (continued) 
Step Action Comments 
4. Remove the card by using the extractor as a lever Each digital peripheral card has one card 
and pulling the card towards you. extractor. The extractor helps seat the card 
firmly in the backplane. 
The extractor is used to provide leverage 
to pull the card free of the backplane 
connector. 
Install New Card 
5. Unpack the replacement card. If there are Retain the packaging material for the re-...

Field-Replaceable Units 
PING CARTON 
HOLDING 10 OR 5 
INDIVIDUALLY PACKAGED 
,.,-,., ,rn pAmnc 
Figure 2-l Printed Circuit Card Packaging 
2-4 Issue 1 Revision 0 March 1997