Mitel SX 200 ML PABX Instructions Guide

Attendant Console 
Physical Description 
The SUI?!%SE~7OOOattendant console consists of an IBM or compatible PC console, 
a video display terminal, a TALK T0 card, a SW/3Sf3400 series handset, an 
extended keyboard (with programmable hard keys, hard keys, softkeys, dial keys, and 
ASCII keys), and a handset cradle. The TALK TO card interfaces with the PABX via 
a single twisted pair connected to a digital line card circuit. Figure 2-4 shows the 
SUPERSET 7UOO attendant console. 
HANDSTANDCRADLE Et30437...

Peripheral Devices 
CALLHANDLING VOLUME 
ESCKEY SOFTKEYS(FUNCTiON) 
KEYS HARO KEYS DlAL#KEY KEYS 
TYPING KEYS CURSORKEYS OIAL PAD 
EEOl90 
2-8 Figure 2-5 SUPERSET 7000 Keyboard Layout 
Functional Description 
The console has IO softkeys, three programmable firmkeys, eight attendant function 
keys, a dial pad, volume and arrow keys. and one hold key (see Figure 2-5 and 
Figure 2-6). It also has an integral handset. 
The attendant function keys provide the following functions: 
9 FUNCTION: allows access to...

Attendant Console 
Figure 2-6 SUPERSET 7000 Display 
Functional Requirements 
The SUPERSET 7CUCI attendant console interfaces with the SX-200 ML PABX via a 
8 
digital line card, which provides telephone trunk and telephone extension information 
to it. For information on the digital line card interface, refer to the Engineerhg 
! 2. 
hforfnat~on Practice. VP 
Requirements for the console and the PC TALK TO BX card are: 
PC Requirements 
Acoustic noise (fan noise): 

Peripheral Devices 
Sound Card to configure ringer cadence and ringer volume 
(optional) 
PC TALK TO Card Requirements 
Power: +5 Vdc + I -5% 
-5 Vdc + I -10% 
+I2 Vdc + I-5% 
-12Vdc +/-IO% 
Operating Temperature: 
Storage Temperature: 
Relative Humidity: 
Modular Jacks: 0 to -+40x 
-40 to +50°c 
5% to 95% non-condensing 
2 
Operation 
This part provides a brief operational outline. For additional information refer to the 
SUI?E/?SET 7000 attendant console user guide. 
Power Up - Upon power up, the...

Attendant Console 
Installing a SUPERSET 7000 Console 
These installation instructions are for installing a TALK TO BX card into the PC only. 
For information on installing the PC (not MITEL supplied ), consult the PC 
manufacturer’s installation guide. 
CAUTION: When setting the SUPERSET 7000 in place, ensure that there is 
adequate airflow for cooling purposes. It should not be placed in 
any enclosure which may restrict this airflow. 
Do not restrict the airflow by placing any objects over the vents...

Peripheral Devices 
Chart 2-2 Install the TALK TO card into the PC (continued) 
Step Action Comments 
11. Hold the 
TALK TO BX card by the top and insert 
into slot and press firmly to seat connector. Secure 
with screw from Step 7. 
12. Replace cover of the PC unit. 
13. 
Reconnect all cables removed in Step 4. 
14. Plug theconsole modular cord into the LINE PORT 
jack located at the rear of TALK TO BX card, and 
into its assigned modular telephone jack. 
15. Plug handset cord into the voice path jack...

Attendant Console 
WI 
-w2 -w3 -w4 
Figure 2-7 Typical SLJPERSET 7000 and TALK TO BX Card Installation 
March 1997 
Issue 1 Revision 0 2-13  

Peripheral Devices 
2-14 Issue 1 
Revision 0 March 1997  

3 The SUPERSET Series 
Telephone Sets 
General 
3.1 The SWERSET400 family of sets consists of four DNIC based digital sets designed 
for use on all MITEL DNIC based Digital Switches. The telephone sets are: 
. SUPERSET 401 +TM 
l SUPERSET 41 OTM 
9 SUPERSET 420TM 
9 SUPERSET 430TM 
The SUPERSET 401+ set is a single line digital set. 
The SUPERSET410, SUPERSET420, and SUPERSET43Osets are multi-line digital 
sets with LCD displays. They are equipped with a MILINKTM network connection that 
allows...

Peripheral Devices 
Headset Compatability 
3.3 
Headset assemblies used with the SUPERSET 400 series telephone sets must be 
externally powered. Headsets from SUPERSET 4 and SUPERSET 4DN telephone 
sets do not operate on SUPERSET series telephone sets. 
Connection to the ML/NK Data Module 
3.4 
To accommodate data call operations, the SUPERSET 410, SUPERSET 42Q and 
SUPERSET 430 telephones are equipped with a M/L/NK network connection. This 
connection allows a WL/NKdevice on the desktop, such as a...