Mitel Sx-100, Sx-200 Attendant Console Guide

SPEED CALL 
(TO STORE A NUMBER) 
To store a Speed Call Number: 
5 Source display shows: 
1 0 Update Speed Call Number Record 
0 Speed Call Entry Code 
2 0 Dial Speed Call Access Code 6 0 Press RELEASE key 
0 Dial 0 0 All displays clear 
0 Dial Speed Call Entry Code 
NOTE: To receive a printout of Speed 
3 l Enter digits required as in the Call Numbers: 
Speed Call Number Record 
7 0 Dial *I9 plus 5 
l BOTH and ANSWER lamps lit 
0 Press RELEASE key 
4 Destination display shows: 
*The digits entered (most...

SPEED CALL (PLACING A CALL) 
Using a stored Speed Call Number: 
1 l 
Dial Speed Call Access Code 
l Dial Speed Call Entry Code 
@BOTH and ANSWER lamps lit 
2 
Destination display shows: 
l Trunk number 
0 ATT lamp lit 
3 Source display shows: 
0 ATT lamp lit 
4 l Trunk busy lamp lit 
0 Number outpulsed 
B30  

SPEED CALL 
(DISPLAY A STORED NUMBER) 
To display a stored number: 
1 0 Dial Speed Call Access Code 
0 Dial # 
0 Dial Speed Call Entry Code 
l Dial # 
2 Source display shows: 
aEntry Code (ATT lamp lit) 
3 Destination display shows: 
@Trunk access code 
0 Up to the first seven digits of the 
number entered 
4 0 Continue to dial # 
For each # dialed, the number in 
the Destination display will be 
moved to the left one segment until 
all digits have been displayed 
5 0 Press RELEASE key 
0 All displays...

SPEED CALL 
(CANCEL A STORED NUMBER) 
1 
0 Update Speed Call Number Record 4 Destination display shows: 
a L 
2 
0 Dial Speed Call Access Code 
0 Dial 0 
0 Dial Speed Call Entry Code 5 0 Press RELEASE key 
0 All displays clear 
0 Dial * 
NOTE: TO receive a printout of 
Speed 
3 
Source display shows: Call numbers: 
l lhe Speed Call Entry Code of the 
number to be cancelled 6 0 Dial *19* 
0 Press RELEASE key 
0 ATT lamp lit 
I 
- 
032  

TIME (SETTING) 
To set the time: 
1 ODial *5 
l ANSWER lamp lights 
0 DESTINATION lamp lights 
2 0 Dial hours 
3 l Dial minutes (must be 2 digits) 
5 Destination display shows: 
0 Hours, minutes (and P if PM and 
12-hour clock) 
0 ATT lamp lit 
6 0 Press RELEASE key 
0 ANSWER and DESTINATION lamps 
go out 
0 Time is displayed on digital clock 
4 0 Dial >k, if time is PM 
(not required if 24-hour clock is 
used) 
B33  

TRUNK ACCESS 
1 @Dial *2O 
@ ANSWER lamp lights 
0 DESTINATION lamp lights 3 
Destination display Shows: 
0 Trunk number 
0 YOU are connected to the trunk 
(ATT lamp lit) 
2 
a Dial trunk number 
ODial >le 
0 you will hear outside dial tone if 4 0 You may proceed normally 
the trunk is free 
l you will hear busy tone if the trunk 
is busy  

TRUNK BUSY-OUT 
1 
0 Dial *9 followed by the trunk 
0 Dial >i< 
number 3 
OANSWER lamp lights 
0 DESTINATION lamp lights 
4 0 Press RELEAT- - 
SE key 
0 ANSWER and DESTINATION lamps 
2 go 
out 
Destination display shows: 
0 Trunk number 0 Destination display clears 
l ATT lamp lit 
Trunk is now busy. 
B35  

TRUNK NON-BUSY 
1 0 Dial >k9 followed by the trunk 
number 
l ANSWER lamp lights 
0 DESTINATION lamp lights 
OATT lamp lit 
2 Destination display shows: 
0 Trunk number 
l ATT lamp lit 
l You are connected to the trunk 
B36 3 
0 Dial # 
4 0 Press RELEASE key 
0 ANSWER and DESTINATION lamps 
go out 
0 Destination display clears 
Trunk is no longer busy 
NOTE: If trunk is assigned to a busy 
lamp number, then that lamp goes out.  

TRUNK GROUP 
‘ATTENDANT ACCESS 
1 0 Dial *6 
l ANSWER lamp lights 
0 DESTINATION lamp lights 
l ATT lamp lit 
2 0 Dial trunk group (1 through 12) 
0 Destination display shows trunk 
group dialed 
3 0 Dial * 
4 0 Press RELEASE key 
0 ANSWER and DESTINATION lamps 
go out 
5 Trunk group status display 
shows: 
OTrunk group is now attendant 
access (Trunk Group Status ATT 
lamp lit) 
NOTE: Trunk groups 11 and 12 are not 
assigned a Trunk Group Status lamp. 
_-. . . -.. 
I ,:-;.. 
. . . . 
, . . . /.. 
rt.2,...

TRUNK GROUP DIAL ACCESS 
1 
0 Dial >kS 
l ANSWER lamp lights 
0 DESTINATION lamp lights 
l ATT lamp lights 
2 0 Dial trunk group (1 through 12) 
3 0 Dial # 
l ATT lamp lit 
4 Destination display shows: 
l Trunk group (1 through 12) 
0 J 
3 0 Press RELEASE key 
0 ANSWER and DESTINATION lamps 
go out 
6 Trunk group status display 
shows: 
0 Trunk group no longer attendant 
access (Trunk Group Status lamps 
dark)