Miele G 8066 Manual

Changing a program
If the selected program has not yet
been started:
Press the desired wash program
button.
Press the "Start"button.
Cancelling a program
Once a program is running it should
only be cancelled in extreme cases,
e.g. when items in the machine rattle or
bump against each other and have to
be rearranged.
Press the "Start"button for approx.
3 seconds. The program is
cancelled.
Open the door.
Caution! Water and items in the
machine may be hot. There is a
danger of burning...

Program 1) Use Powder detergent 2)
Follow manufacturers
instructions

INTENSIVE
3 minFor heavily soiled dishes with dried
on food40 gon the inside of the door
Add 20 g (1 ½ tablespoon)
after every five programs.

STANDARD
2 minFor normally soiled dishes 40 gon the inside of the door
Add 20 g after every five
programs.

SHORT
1.5 min"Quick program" for lightly soiled
dishes.40 gon the inside of the door
Add 20 g after every five
programs.

DRAINTo drain the wash water also for
cleaning the...

Program 1) Program cycle
Main wash
3) 4)Run-off Final rinse
3) 5)

INTENSIVE
3 min149°F/65°C
160 sec5 sec 194°F/90°C
10 sec

STANDARD
2 min149°F/65°C
100 sec5 sec 194°F/90°C
10 sec

SHORT
1.5 min149°F/65°C
70 sec5 sec 194°F/90°C
10 sec

DRAIN2 min 45 sec
3) To change the wash and rinse temperatures and rinse duration, see
"Programming special functions".
4) Durations may vary
5) Times will depend on drain and rinse durations.
For applications where high temperature sanitizing is required...

Every change of a factory setting
should be documented.
Record any changes in the field
"Value set: ___________".
When special function settings are
changed or the dispensing systems are
primed, the dishwasher will
automatically be drained. To save
energy and time, these tasks should be
done when the dishwasher tank is
empty.
1. DOS 1 Detergent dosage
concentration level and
venting the dispensing system
(Programming level 2)
G 8066
The models G 8066 and G 8066 WES
DOS are designed for use with...

Accessing Programming level 2
Turn the machine off by pressing.
Press and hold theandbutton,
at the same timeturn the machine
on with the main switch.
The display shows the current
program statusP....
Theindicator lights.
Press thebutton twice. The
display shows2(programming
level 2).1.1 Setting the detergent dispensing
method
Press thebutton once.
The display shows2.01
Pressonce. The display shows
either0, 1, 2or3.
0=powder detergentplaced on the
inside of the door (G 8066)
1=liquid...

1.2 Setting the detergent dosage
concentration level
If the dispensing method has been
programmed for liquid detergent, you
can adjust the dispensing
concentration.
Set the dispensing concentration
according to the detergent
manufacturer’s recommendations
and the applications.
Example: If the manufacturer
recommends a detergent concentration
of 0.5%, a value of 0.50 should be set.
Select programming level 2.
Pressuntil2.02is displayed.
Press thebutton. The liquid
detergent dosage concentration is...

2. DOS 2 Rinse aid dosage
concentration level and
venting the dispensing system
(Programming level 3)
Accessing programming level 3
Turn the machine off by pressing.
Press and hold theandbutton,
at the same timeturn the machine
on with the main switch.
The display shows the current
program statusP....
Theindicator lights.
Press thebutton 3 times. The
display shows3(programming
level 3).
2.1 Selecting the rinse aid dispensing
method
Press thebutton once. The
display shows3.01.
Pressonce. The...

2.3 Venting the dispensing system
Select programming level 3.
Pressuntil3.03is displayed.
Press. The display showsdo2.
Press thebutton.
The dispensing system will be vented
automatically.0will appear in the
display when the venting process is
complete.
If you do not want to make any other
setting changes in this programming
level, proceed to step2.4.2.4 To save your changes
Press thebutton. The display
showsSP.
Press thebutton again. The
change has been saved.
Turn the machine off with the...

3. Setting the main wash or
final rinse temperature and/or
final rinse duration
(Programming level 4)
Any changes to the wash
temperature and/or the temperature
holding time should be recorded in
the appropriate section of the
"Program guide".
The factory default settings for the main
wash and final rinse temperatures and
for the final rinse duration are given in
the "Program guide".
A main wash temperature of 68 - 149 °F
(20 °C - 65 °C) can be set in
Programming level 4. The final rinse...

3.2 Setting the offset range of the
final rinse temperature
Select programming level 4.
Pressuntil4.02is displayed.
Pressonce, the display shows
the current setting20. The machine is
factory set to 20 °Cabove the main
wash temperature.
It means, if the factory set wash
temperature is 65 °C, the final rinse
temperature is 85 °C.
Press thebutton until the desired
temperature is displayed.
The final rinse temperature should
be set approximately 20 °C higher
than the main wash temperature. For...