Miele Cs12121 Manual

Installation51Installation with a downdraftextractorPlease refer to the separate "Downdraftextractor with CombiSet" instructionmanual for details about installing adowndraft extractor with a CombiSetappliance.Installing the CombiSet
000EFeed the mains connection cabledown through the cut-out.000EStarting at the front, position theCombiSet in the worktop cut-out.000EUsing both hands, press down evenlyon the edges of the CombiSet until itclicks into position. When doing thismake sure that the seal...

Installation52Connecting the CombiSet000EConnect the CombiSet(s) to themains.000ECheck that each CombiSet works.
Removing the CombiSet
If the CombiSet cannot be accessedfrom below, you will need a specialtool to remove it.000EIf the CombiSet can be accessedfrom below, push it out from below.Push the rear side out first. 

Electrical connection53All electrical work should be carried outby a suitably qualified and competentperson in strict accordance with currentlocal and national safety regulations(e.g. BS 7671 in the UK). Connectionshould be made via a switched socket.This will make it easier for service tech-nicians should the appliance need to berepaired. The electrical socket must beeasily accessible after installation.
Danger of injury.Miele cannot be held liable for unau-thorised installation, maintenanceand repair...

Electrical connection54Disconnecting from the mainsDanger of electric shock.After disconnection, ensure the ap-pliance cannot be switched back onby mistake.
To disconnect the appliance from themains power supply, do one of the fol-lowing depending on installation:Safety fuses
000ECompletely remove fuses
Automatic circuit breakers
000EPress the (red) button until the middle(black) button springs out.
Built-in circuit breakers
000ECircuit breakers, type B or C: switchthe on-off switch from 1 (on) to 0...

After sales service, data plate, guarantee55After sales serviceIn the event of any faults which you cannot easily remedy, please contact–your Miele Dealer, or–Miele Service.See end of this booklet for contact details.Please note that telephone calls may be monitored and recorded for training pur-poses.
N.B. A call-out charge will be applied to service visits where the problem couldhave been resolved as described in these instructions.When contacting your Dealer or Miele, please quote the model and serial...

Product data sheets56The following data sheets apply to the models described in this operating instruc-tion manual.Information for domestic electric hobsIn acc. with regulation (EU) No. 66/2014
MIELEModel name / identifierCS 1212-1Number of cooking zones and/or areas2For circular cooking zones: diameter of useful sur-face area/cooking zoneFor non-circular cooking zones or areas: lengthand width of useful surface area per electric cook-ing zone or area
1. = Ø 100-160 mm2. = Ø 160-230 mm3. = 4. = 5. = 6....

Product data sheets57Information for domestic electric hobsIn acc. with regulation (EU) No. 66/2014MIELEModel name / identifierCS 1222Number of cooking zones and/or areas2For circular cooking zones: diameter of useful sur-face area/cooking zoneFor non-circular cooking zones or areas: lengthand width of useful surface area per electric cook-ing zone or area
1. = Ø 100-160 mm2. = Ø 200 / 200x300 mm3. = 4. = 5. = 6. =
Energy consumption per cooking zone or area cal-culated per kg (ECelectric cooking)1. =...

United KingdomMiele Co. Ltd.Fairacres, Marcham RoadAbingdon, Oxon, OX14 1TWCustomer Contact Centre Tel: 0330 160 6600E-mail: [email protected]: www.miele.co.uk
AustraliaMiele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 3981 Gilbert Park Drive, Knoxfield, VIC 3180Tel: 1300 464 353Internet: www.miele.com.au
Miele (Shanghai) Trading Ltd.1-3 Floor, No. 82 Shi Men Yi RoadJing' an District200040 Shanghai, PRCTel: +86 21 6157 3500, Fax: +86 21 6157 3511E-mail: [email protected], Internet:...

M.-Nr. 09 055 450 / 06en-GBCS 1212-1 I / CS 1221 I / CS 1222 I0016