Miele Cs12121 Manual

Safety features31System lockThe system lock can only be activatedif all the cooking zones are switchedoff.
Your hob is equipped with a systemlock to prevent the cooking zones beingswitched on inadvertently.If a power level is selected when thesystem lock is activated, 0007 appears inthe display for approx. 3 seconds.Activating
000ETurn the (outer) right cooking zonecontrol anti-clockwise to the point ofresistance and hold it until 0007 appearsin the display.
Deactivating
000ETurn the (outer) right...

Safety features32Overheating protectionAll the induction coils and cooling ele-ments for the electronics are fitted withan overheating protection mechanism.Before the induction coils or coolingelements get too hot, the overheatingprotection mechanism cuts in in one ofthe following ways:
–Any Booster function in operation willbe switched off.–The set power level will be reduced.–The cooking zone will switch offautomatically. 000B will flash in the cook-ing zone display.–Further cooking zones switch...

Cleaning and care33Danger of burning.The cooking zones must be switchedoff. The hob must have cooled down.Danger of injury.The steam from a steam cleaning ap-pliance could reach electrical com-ponents and cause a short circuit.Do not use a steam cleaner to cleanthe hob.
The use of unsuitable cleaningagents can cause the surfaces todiscolour or alter.All surfaces are susceptible toscratching.Remove any cleaning agent residuesimmediately.
Allow the CombiSet to cool downbefore cleaning.000EThe CombiSet...

Cleaning and care34Ceramic surfaceDo not clean the area between theglass-ceramic surface and the frameor the frame and the worktop withsharp, pointed objects.This could damage to the seals.
Do not use washing-up liquid toclean the appliance as washing-up li-quid will not remove all soiling anddeposits.It will form an invisible coating whichwill cause permanent discolourationof the ceramic surface.Clean the hob regularly with a suit-able ceramic hob cleaning agent.
Wipe all coarse soiling off using a...

Cleaning and care35Stainless steel frame/controlpanel000EClean the frame and the control panelwith a solution of warm water and alittle washing-up liquid applied with asoft sponge.
You can also use a ceramic and stain-less steel cleaning agent. We recom-mend also using a stainless steel condi-tioning agent to help prevent resoiling(see "Optional accessories).
Do not use ceramic and stainlesssteel cleaner or stainless steel condi-tioning agent on the printing.This would rub the printing off.These...

What to do if ...36With the aid of the following guide, minor problems can be easily correctedwithout contacting Miele.If having followed the suggestions below, you still cannot resolve the problem,please contact Miele (see end of this booklet for contact details).
Danger of injury. Installation, maintenance and repairs may only be carriedout by a suitably qualified and competent person. Repairs and other work by unqualified persons could be dangerous. Miele can-not be held liable for unauthorised...

What to do if ...37ProblemCause and remedy0008 flashes alternatelywith the power level in acooking zone display.The power level set has been reduced because theBooster function on the linked cooking zone hasbeen activated (see "Booster").0008 flashes alternatelywith 000F in a cooking zonedisplay. The cookingzone has switched offautomatically.
There has been no pan, or an unsuitable pan, on thecooking zone for more than 3 minutes.000EUse pans that are suitable for induction (see"Pans") or...

Optional accessories38Miele offer a comprehensive range ofuseful accessories as well as cleaningand conditioning products for yourMiele appliances.These products can be ordered throughthe Miele Webshop.These can also be ordered from Miele(see end of this booklet for contact de-tails) or from your Miele dealer.
Ceramic and stainless steelhob cleaner 250 ml
Removes heavy soiling, limescale de-posits and aluminium residuesStainless steel conditioningagent 250 mlRemoves water marks, flecks and fingerprints....

Safety instructions for installation39The CombiSet must only be installed and connected to the electricity sup-ply by a suitably qualified and competent person in strict accordance with cur-rent national and local safety regulations.Fit the wall units and cooker hood before fitting the CombiSet to avoid dam-aging it.00010002The veneer or laminate coatings of worktops (or adjacent kitchenunits) must be treated with 100 °C heat-resistant adhesive which willnot dissolve or distort. Any backmoulds must be...

Safety distances40Safety distance above theCombiSet
A minimum safety distance must bemaintained between the CombiSet andthe cooker hood above it. See thecooker hood manufacturer's operatingand installation instructions for details.If the manufacturer's instructions arenot available for the cooker hood a min-imum safety distance of at least760 mm must be maintained, or if anyflammable objects (e.g. utensil rails,wall units etc) are installed above theCombiSet, a minimum safety distanceof at least...