Marantz Vp 12s2 DLP Projector User Manual
Here you can view all the pages of manual Marantz Vp 12s2 DLP Projector User Manual. The Marantz manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
ENGLISH 27 ❖Setting the Config Menu 1.Use 3/4key to adjust. 2.Use 1key to go back to the menu item. Select either 12V output or 0V output by choosing On or Off for each aspect mode. Full, Normal, Zoom, and Through. On: Output DC 12V. Off: No output. This allows you to control such as a powered dual aspect screen with the outputs for the aspect modes. ❖Setting the Trigger 2 Menu 1.Use 3/4key to adjust. 2.Use 1key to go back to the menu item. 1. 2.1. 2. Picture Adjust Setting Display Config Trigger 2...
Page 32
ENGLISH 28 This unit has 4 picture modes, Theater, Standard, Dynamic, User, for your choice. You can choose one with the direction buttons on the unit or on the remote. •Theater : This mode is designed for high fidelity black appearance and is good for movie pictures. •Standard : This mode is good for normal pictures. •Dynamic : This mode is good for visually dynamic pictures. •User : This mode allows you to adjust your favorite gamma curve. Note: It is possible to download the software for making the...
Page 33
ENGLISH 29 –When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen automatically. –When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen . To clear the warning, press the MENUkey. –When the lamp life has expired (Lamp Life 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will light up in red. ❖Initialize the Lamp Life If the lamp is replaced to new one, follow this...
Page 34
ENGLISH 30 1.Press the STANDBYkey on the remote controller or the POWERkey on the projector to turn the projector off. 2.After the cooling fan stops, Unplug the AC power cord. 3.Wait at the least one hour for the lamp and lamp unit to cool down. 4.Read the caution and warning labels on the unit. 5.Remove the lamp cover screw. 6.Remove the lamp cover in the direction of the arrow. 7.Remove the two screws of the lamp unit. At this time, do not remove the other screws. Lamp coverLamp cover MAINTENANCE...
Page 35
ENGLISH 31 8.Holding the handle and pull the lamp unit out toward your side. 9.Install a new lamp unit in position securely. 10.Tighten the two screws of the lamp unit. Push and fold the handle. 11.Install the lamp cover back in its original position and fasten with the fastening screw. 12.Plug in the video projector and turn on the power and project the image. Reset the Lamp Life. ( P.26)If the lens becomes dirty or smudged, clean it with a soft dry cloth only. Use optical lens cleaners that are...
Page 36
ENGLISH 32 No power Image is not displayed. Poor color. Picture is too dark. Picture is not clear. Picture rolls. The Remote Controller does not work.AC power cord is not connected correctly. Lamp cover is not closed correctly. A signal cable is not connected correctly. Selected input is incorrect. The picture mute is active. Picture is not adjusted properly. Lamp life is running out. Contrast or brightness is not adjusted properly. Picture is out of focus. Dew is on the lens. A signal cable is not...
Page 37
ENGLISH 33 ❖Optical characteristics Panel 0.8 inch 16:9 1280 x 720 pixels Digital Micromirror Device TM Lamp Super High Pressure 150W Lens f: 26.5 to 30.7 / F: 3.0 Projection size 40 to 250 inches Light output 700 ANSI LUMEN typical ❖Input/Output VIDEO IN RCA x 1 NTSC-3.58/PAL-4.43/SECAM Composite video 1.0Vp-p/75 Ohm S-VIDEO IN S-Connector x 1 NTSC-3.58/PAL-4.43/SECAM S-Video COMPONENT IN RCA x 3 Y, C B/PB, CR/PR RGB/HD IN D-sub M 15 pin x 1 Analog RGB HD:1080i, 720p, 480p DVI-D IN DVI-D 24pin x 1...
Page 38
ENGLISH 34 ❖Timing chart NTSC PAL-B/G SECAM 480/60p 576/50p 1035/60i 1080/60i 1080/50i 1080/48i 720/60p 720/50p 720/48p 540/60p 640x350 #1 640x350#1 640x400#1 640x400#1 640x480 640x480#1 640x480#1 640x480#1 800x600 800x600 800x600 #1 800x600#1 800x600#1 1024x768 1024x768 1024x768 #1 1024x768#1 1024x768#1 768x240 960x287.5 960x287.5 720x480 720x576 1920x518 1920x540 1920x540 1920x540 1280x720 1280x720 1280x720 1920x540 640x350 640x350 640x400 640x400 640x480 640x480 640x480 640x480 800x600 800x600...
Page 39
ENGLISH 35 DIMENSIONS STANDBYPOWER ON LENS SHIFT LAMPWARRNINGENTER FOCUS MENU POWER LEFTRIGHT DOWNINPUT UP 18 1/2 - 18 17/32 (470 - 471) 8 21/32(222.0)7 3/16(182.5) 3 1/4( 82.6) 4 11/16 (119.0) 4 1/8(105.0) 2 9/32(58.0) 1 21/32(42.0) 6 1/32(153.5) VP-12S2 19/32 - 2 7/16 (15.0 - 61.8) 6 23/32 (171.0) 5 5/8 (143.0) 3 - 3 3/8 (76.0 - 86.0)5 3/16 (132.0) 5 3/4(145.75) 25/32 (19.75) 11 11/16 (296.5) 10 5/16 (262.0) 13 21/32 (346.5) 4 7/8 (123.5) 4 11/16(110.0)3 11/16(93.5) 7 9/32(185.25) ( 64)2...
Page 40
Printed in Japan08/2002 MITf 04AV851250 is a registered trademark.R COUNTRY COMPANY ADDRESSALGERIEAzur 2000 8, Lotissement Ben Hatadi, Alger, AlgerieARMENIANGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, ArmeniaAUSTRALIAQualiFi Pty. Ltd., P.O. Box 350, Mt. Waverley, VIC 3149, AustraliaAUSTRIAHuber & Prohaska GmbH Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, AustriaBAHREINAmbassador Stores P.O. Box 237,141, Government Avenue, Manama,BahreinBANGLADESHTarget 1078, Ramjoy Mohanja...