Marantz Vp 12s2 DLP Projector User Manual

R
Model VP-12S2 User Guide
DLP
TMProjector 

The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
CAUTION
RISK OF ELECTRIC...

IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality
and safety standards. There are, however, some installation and
operation precautions which you should be particularly aware of.
1. Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2. Retain Instructions – The safety and operating instructions should
be retained for future reference.
3. Heed Warnings – All warnings on...

ENGLISH
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS......................................................................................................................................1
Caution Concerning the Lamp Replacement ..............................................................................................................................1
Caution Concerning the Lamp Unit...

ENGLISH
1
There is potential glass particle hazard if the lamp ruptures.
There is a potential hazard of glass particle if the lamp ruptures.
In case of lamp rupture,contact your nearest Marantz Authorized Dealer or Service Center for a replacement.
See “Replacing Lamp Unit”. (
P.30)
For minimal servicing and to maintain high image quality, avoid humidity,
dust and cigarette smoke.
When the projector is subjected to these environments,the lens and
part of ventilation holes must be cleaned more often than...

ENGLISH
2
FEATURES
❖Optics
•Texas Instruments DLPTM(Digital Light Processing)
Technology
•1280 x 720 DMD
TMPanel
•16 : 9 Aspect Ratio
•Custom Optics Developed by Minolta
•2600 : 1 Contrast Ratio
•700 ANSI Lumens Brightness
•Brightness Uniformity : 90 %
•No Halo Effect
•Lens Up/Down Shift Construction
•Dust Free Optics Sealing
•No Light Leakage 
(Double Seals Cabinet Structure)
•Extremely Quite (Noise Cancel Duct Construction,
Ceiling Color Wheel Motor)
•Long Life Lamp (Average 2000 Hours)
•Double Shrink...

ENGLISH
3
•Lens Cap x 1
•Remote Controller x 1
•AA Size Batteries x 2•AC Power Code (Only for 125V) x 1
•Control Adapter Cable (Mini Jack to RCA) x 1
•User Guide x 1
•Warranty Card (1 copy each for USA, CANADA)
R
ACCESSORIES 

ENGLISH
4
Front and Top View
3
2
1
13
976510411128
IR sensor Projection
Lens
qFocus ring (P.10)
Adjust the picture focus.
wZoom ring (P.10)
Adjust the size of the projected image.
eLens Shift knob (P.10)
Manually adjust the position of the image vertically.
rPOWER key (P.16)
Press to turn the projector ON or STANDBY mode. 
tMENU key (P.21)
Display the on-screen menu.
yENTER key
Confirm Reset All, Reset Lamp Life, New Lamp?.
uINPUT SELECT key (P.16)
When the key is pressed, the unit toggles between...

ENGLISH
5
Rear and Terminals View
13
14Lamp cover
securing screw Lamp coverIR sensor
12345
7891011
Terminals
6
!4AC IN (P. 8 )
Connect the supplied AC power code.
❖Terminals
zRGB IN
Connect the analog RGB output from an IBM VGA or compatible
equipment.
xCOMPONENT VIDEO IN
Y, PB/CB, PR/CRconnectors.
Connect the COMPONENT VIDEO output from video
equipment or an A/V processor/receiver with a component
video output.
cS-VIDEO IN
Connect the S-VIDEO output from a video equipment.
vVIDEO IN
Connect the...

ENGLISH
6
Remote Controller
a
d
g l
¡2
¡5
¡7
™1
¡1
¡6 s
h
k
¡0
¡3
¡4
¡9
¡8
™0 j
f
PROJECTOR
aPOWER ON key (P.10)
Turn the projector on.
sSTANDBY key (P.19)
Turn the projector off.
d3/4/1/2keys 
Control the MENU cursor.
fENTER key
Confirm Reset All, Reset Lamp Life, New Lamp?.
gMENU key (P.21)
Display the on-screen menu.
hCOMPONENT key (P.16)
Select the COMPONENT VIDEO IN  signal.
jS-VIDEO key (P.16)
Select the S-VIDEO IN signal.
kVIDEO key (P.16)
Select the VIDEO IN signal.
lRGB key (P.16)
Select...