Marantz Vp 12s2 DLP Projector User Manual
Here you can view all the pages of manual Marantz Vp 12s2 DLP Projector User Manual. The Marantz manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 2
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC...
Page 3
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on...
Page 4
ENGLISH TABLE OF CONTENTS IMPORTANT SAFEGUARDS......................................................................................................................................1 Caution Concerning the Lamp Replacement ..............................................................................................................................1 Caution Concerning the Lamp Unit...
Page 5
ENGLISH 1 There is potential glass particle hazard if the lamp ruptures. There is a potential hazard of glass particle if the lamp ruptures. In case of lamp rupture,contact your nearest Marantz Authorized Dealer or Service Center for a replacement. See “Replacing Lamp Unit”. ( P.30) For minimal servicing and to maintain high image quality, avoid humidity, dust and cigarette smoke. When the projector is subjected to these environments,the lens and part of ventilation holes must be cleaned more often than...
Page 6
ENGLISH 2 FEATURES ❖Optics •Texas Instruments DLPTM(Digital Light Processing) Technology •1280 x 720 DMD TMPanel •16 : 9 Aspect Ratio •Custom Optics Developed by Minolta •2600 : 1 Contrast Ratio •700 ANSI Lumens Brightness •Brightness Uniformity : 90 % •No Halo Effect •Lens Up/Down Shift Construction •Dust Free Optics Sealing •No Light Leakage (Double Seals Cabinet Structure) •Extremely Quite (Noise Cancel Duct Construction, Ceiling Color Wheel Motor) •Long Life Lamp (Average 2000 Hours) •Double Shrink...
Page 7
ENGLISH 3 •Lens Cap x 1 •Remote Controller x 1 •AA Size Batteries x 2•AC Power Code (Only for 125V) x 1 •Control Adapter Cable (Mini Jack to RCA) x 1 •User Guide x 1 •Warranty Card (1 copy each for USA, CANADA) R ACCESSORIES
Page 8
ENGLISH 4 Front and Top View 3 2 1 13 976510411128 IR sensor Projection Lens qFocus ring (P.10) Adjust the picture focus. wZoom ring (P.10) Adjust the size of the projected image. eLens Shift knob (P.10) Manually adjust the position of the image vertically. rPOWER key (P.16) Press to turn the projector ON or STANDBY mode. tMENU key (P.21) Display the on-screen menu. yENTER key Confirm Reset All, Reset Lamp Life, New Lamp?. uINPUT SELECT key (P.16) When the key is pressed, the unit toggles between...
Page 9
ENGLISH 5 Rear and Terminals View 13 14Lamp cover securing screw Lamp coverIR sensor 12345 7891011 Terminals 6 !4AC IN (P. 8 ) Connect the supplied AC power code. ❖Terminals zRGB IN Connect the analog RGB output from an IBM VGA or compatible equipment. xCOMPONENT VIDEO IN Y, PB/CB, PR/CRconnectors. Connect the COMPONENT VIDEO output from video equipment or an A/V processor/receiver with a component video output. cS-VIDEO IN Connect the S-VIDEO output from a video equipment. vVIDEO IN Connect the...
Page 10
ENGLISH 6 Remote Controller a d g l ¡2 ¡5 ¡7 ™1 ¡1 ¡6 s h k ¡0 ¡3 ¡4 ¡9 ¡8 ™0 j f PROJECTOR aPOWER ON key (P.10) Turn the projector on. sSTANDBY key (P.19) Turn the projector off. d3/4/1/2keys Control the MENU cursor. fENTER key Confirm Reset All, Reset Lamp Life, New Lamp?. gMENU key (P.21) Display the on-screen menu. hCOMPONENT key (P.16) Select the COMPONENT VIDEO IN signal. jS-VIDEO key (P.16) Select the S-VIDEO IN signal. kVIDEO key (P.16) Select the VIDEO IN signal. lRGB key (P.16) Select...