Lucent Technologies Remote Port Security Device Users Guide

Cables, Connectors, and Ports 
Page A-1  
A
Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
A
0Cables, Connectors, and Ports
Ta b l e  A - 1 shows the cables, connectors, and ports for installing the RPSD 
system. This table includes optional connections as well as the basic 
configuration. 

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Cables, Connectors, and Ports 
Page A-2  
A
Table A-1. Cables, Connectors, and Ports
Part Comcode From To
Modular connector XXXXXX Cable from 
PBXRJ11 at modem
7-ft. cable with 
modular connector 
on each endSupplied with 
RPSD LockRPSD Lock CO line or modem
14-ft. cable with 
modular connector 
on each endSupplied with 
RPSD LockRPSD Lock CO line or modem
RJ11  wall  jack XXXXXX CO  line RJ11 TELCO jack on 
RPSD Key
EIA-RS-232...

Front Panel LEDs 
Page B-1  
B
Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
B
AFront Panel LEDs
Both the RPSD Lock and the RPSD Key have seven LEDs on their front panels. 
This appendix explains the meaning of each LED and its various states. 

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Front Panel LEDs 
Page B-2 RPSD Lock 
B
RPSD Lock
The first LED on the left of the RPSD Lock is the red POWER light (see Figure 
B-1). This indicates that the power is on. This LED should remain lit whenever the 
RPSD Lock is plugged into an electrical outlet.
Figure B-1. RPSD Lock LEDs
When the Lock is first powered up, the LEDs should all blink on and off in unison 
three times and then settle into a LOCKED condition. Table B-1...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Front Panel LEDs 
Page B-3 RPSD Key 
B
RPSD Key
The first LED on the left of the RPSD Key is the red POWER light (see Figure B-2). 
This indicates that the power is on. This LED should remain lit whenever the 
RPSD Lock is plugged into an electrical outlet.
Figure B-2. RPSD Key LEDs
When the RPSD Key is first powered up, the LEDs should all blink on and off in 
unison three times, then settle into an IDLE condition. Table B-2...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Front Panel LEDs 
Page B-4 RPSD Key 
B