Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 61

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-5 SREPN connections 
2
Expansion Interface connections
nTN570C Exp ansion Interfac e (EI) c irc uit p ac ks use either the 9823A 
(multimod e) or the 300A (sing le mod e) transc eivers.
NOTE:
A new SREPN system inc lud es the TN570C EI c irc uit p ac k. Earlier EI 
c irc uit pac ks (for examp le, TN570B) are not sup p orted .
DS1 CONV...

Page 62

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-6 SREPN connections 
2
Transfer sequence to Survive mode
Transfer from Normal to Survive mode is automatic  and  is c ontrolled  b y the 
TN775C Maintenanc e b oard . Fi g u re  2 - 3
 shows a schematic of the link switc hing  
within the TN2301 c irc uit p ac k.
Figure 2-3. TN2301 link switching schematic
The transfer seq uenc e to Survive mod...

Page 63

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-7 SREPN connections 
2
Tab le 2-3 shows the sequenc e of events to transfer to the Survive mod e, the 
ap p roximate times for eac h event, and  the servic e affec ted  at eac h stag e.
TN2301 (SRSwitch)
The SRSwitc h c irc uit p ac k (TN2301) oc c up ies 6 slots in the SRP c ab inet. Fi g u re  
2-4 shows the fac ep late switc h and  LEDs for...

Page 64

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-8 SREPN connections 
2
Figure 2-4. TN2301 faceplate switch and LEDs
Faceplate switch
Tab le 2-4 ind ic ates the 3 p ositions for the fac ep late switc h and  the use for eac h.
Table 2-4. Faceplate switch positions and uses
Label Position Use
RSTR Top Forc es c ontrol to the Release 7r b y switc hing  from Survive mod e 
to Normal mod e
1
1....

Page 65

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-9 SREPN connections 
2
SREPN connections
Fi g u re  2 - 5 shows a d etailed view of the rear p anel c onnec tors.
Figure 2-5. SREPN rear panel - detail
scdfsre4 RPY 022398
PI EI
TX S.R.
SW ITCHEPN B EPN APPN B PPN A
TX TX TX
RX RX RX RXAUX
DCE TERM 

Page 66

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-10 SREPN connections 
2
Fi g u re  2 - 6 shows the hard ware c onnec tions in the d irec t fib er system.
Figure 2-6. Detailed SRP direct fiber connections Figure Notes:
1. Fib er transmit (TX) and rec eive (RX) 
p airs for A and  B c arriers.
2. SRP AUX B25A 25-p air c ab le; max. 
leng th =  50 ft. (15.25 m):
nMajor SRP p ower failure alarm...

Page 67

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-11 SREPN connections 
2
Fi g u re  2 - 7 shows the hard ware c onnec tions in the DS1-CONV system.
Figure 2-7. Detailed SRP DS1-CONV connections  Figure Notes:
1. Fib er transmit (TX) and rec eive (RX) 
p airs for A and  B c arriers.
2. SRP AUX B25A 25-p air c ab le; max. 
leng th =  50 ft. (15.25m):
nMajor SRP p ower failure alarm lead
nRemote...

Page 68

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-12 Maintenance procedure 
2
Maintenance procedure
Sinc e Survive mod e is invoked  bec ause of a link failure b etween the Release 7r 
and  an EPN, the maintenanc e strateg y is to:
1.‘‘
Check system status’’
2.‘‘Rep air the link c onnec tion’’
3.‘‘Rec onnec t the Release 7r to the EPN’’
4.‘‘Post-reset check’’
The final sec tions of this c hap...

Page 69

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-13 Maintenance procedure 
2
Expansion Interface (TN570C) LED interpretation
The Exp ansion Interfac e c irc uit p ac k has red , g reen, and  yellow LEDs. The red  
and  g reen LEDs show the stand ard  c ond itions:
nRed  ind ic ates an alarm c ond ition
nGreen ind ic ates maintenanc e testing  in p rog ress
The yellow LED is used  to p rovid e...

Page 70

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Maintenance 
2-14 Maintenance procedure 
2
Table 2-6. Expansion Interface circuit pack 
Yellow LED Flashing States 
Condition LED On LED Off
Fib er Out-of-Frame
1
1. This flashing  state c orresp onds to Error Codes 769 and  770 from the 
Hard ware Error Log and ind icates a failure of Test #238. These error cod es 
are usually ac c ompanied  by Error Cod e...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual

All Lucent Technologies manuals