Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Maintenance For Survivable Remote EPN Manual

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-19 Administer the Release 7r and SRP 
1
2. Disp lay the hard ware in the SREPN b y typ ing  display circuit-packs 
  (the port network number of the SREPN) and pressing 
En t e r.
NOTE:
The p ort network numb ers d iffer b etween the Release 7r and  the 
SRP. On the Release 7r manag ement terminal, the p ort network that 
you may b e d isp...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-20 Administer the Release 7r and SRP 
1
5. Ad d  all of the trunk group  information (d isp layed  on the Release 7r 
manag ement terminal) to the SRP management terminal. 
NOTE:
The p ort network numb ers d iffer b etween the Release 7r and  the 
SRP. On the Release 7r manag ement terminal, the p ort network that 
you may b e d isp laying is...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-21 Administer the Release 7r and SRP 
1
4. On the SRP manag ement terminal, typ e add station
  
(extension is the same station extension as ab ove) and  p ress 
En t e r. 
5. Dup lic ate all of the station information d isp layed  on the Release 7r 
manag ement terminal to the SRP manag ement terminal. 
NOTE:
Rememb er to ad d  any ad d...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-22 Administer the Release 7r and SRP 
1
2. Ad d  the information to the SRP manag ement terminal. For examp le, typ e 
change feature-access-codes
 and press 
En te r.
3. Type save translation 
(optional) and press 
En te r.
Administering the maintenance parameters
Pag e 1 of the system-p arameters maintenanc e form c ontains 2 fields that must...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-23 Replace Release 7r circuit packs 
1
To administer the sync  sourc e for the SRP:
1. On the SRP manag ement terminal, typ e change synchronization
 and  
p ress 
En t e r.
2. Enter a DS1 trunk c irc uit p ac k on the SRP as the primary sync  sourc e.
3. Press 
En t e r. 
NOTE:
When the system is in the survive mod e, the sync hronization of...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-24 Replace EPN circuit packs and make cable connections 
1
Connect DS1CONV cables for standard/high
reliability
1. Connec t the eq uip ment as shown in Fig ure 1-10.
2. Power up the EPN.
3. Go to the ‘‘
Test the SRP’’ sec tion.
Connect DS1CONV cables for critical
reliability
1. Connec t the eq uip ment as shown in Fig ure 1-11.
2. Power up the...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-25 Replace EPN circuit packs and make cable connections 
1
Figure 1-10. EPN DS1CONV standard/high reliability cable connectionsFigure Notes
1. MCC c ab inet
2. EPN c arrier A
3. DS1 c ab le from Port Network Connec tivity 
(PNC) A link
4. DS1CONV 2-foot (60.96 c m) Y c ab le (Tie wrap 
the cab le to the c ab inet.)
5. 9823A transceiver
6. 9823A...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-26 Replace EPN circuit packs and make cable connections 
1
Figure 1-11. EPN DS1CONV critical reliability cable connectionsFigure Notes
1. MCC c ab inet
2. EPN c arrier B
3. EPN c arrier A
4. DS1 c ab les from Port Network Connec tivity 
(PNC) A and  B links
5. DS1CONV 2-foot (60.96 c m) Y c ab le (Tie wrap 
the cab le to the c ab inet.)
6....

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-27 Replace EPN circuit packs and make cable connections 
1
Figure 1-12. EPN Direct fiber standard/high reliability cable connectionsFigure Notes
1. SCC cab inet
2. 9823A transceiver on the EI connec tor
3. B25A 25-p air cab le
4. Main Distrib ution Frame (MDF)5. Fib er op tic  cab le
6. From the EPN A TX and RX 
connec tors on the rear of the...

DEFINITY® Enterprise Communications Server Release 7 Installation and 
Maintenance for Survivable Remote EPN  555-233-102  Issue 2
June 1999
SREPN Installation 
1-28 Replace EPN circuit packs and make cable connections 
1
Figure 1-13. EPN Direct fiber critical reliability cable connectionsFigure Notes
1. MCC c ab inet
2. EPN c arrier B
3. EPN c arrier A
4. 9823A transceiver on the EI connec tor
5. Fib er op tic  cab les6. From the EPN B TX and RX 
connec tors on the rear of the SRP
7. Main Distribution...