Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Manual

Configuration 1: R8r  R8si 
61
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Prerequisite Administration
There are some system administration tasks that need to be completed before you can 
proceed with the connectivity administration described in this section.
Review the checklist of prerequisite administration tasks in Checklist for Prerequisite 
Administration  (page 54), before proceeding with the connectivity administration in 
this...

Configuration 1: R8r  R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
62
Switch 1 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This 
screen is administered on Switch 1. A Node Names screen must be administered on 
each switch in the network.
The node names and IP addresses in any network should be assigned in a logical and 
consistent manner from the point of view of the whole...

Configuration 1: R8r  R8si 
63
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 1 Task — Assign Link via ppp Data Module to Switch 2
This task administers a ppp data module on Switch 1 for the ppp connection to Switch 
2. The data module defines a network interface — it associates a link number with a 
port address and node name for the C-LAN port on Switch 1. It also specifies the 
node name for the destination node, which is a C-LAN...

Configuration 1: R8r  R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
64
> Submit the screen
End
COS
The values for these fields will be specified by the system 
administrator. COR:
TN:
BCC: Bearer Capability Class. This is a display-only field.
Node Name: The node name for the interface (C-LAN port) defined by this 
data module. This must be a name previously entered on the 
Node Names screen.
Subnet Mask:
Establish 
Connection?y means...

Configuration 1: R8r  R8si 
65
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 1 Task — Assign Processor Channels
This task associates data links (hardware) with processor channels (software) on 
Switch 1 and specifies the destination node and machine ID.
Begin
Steps
> Open the Processor Channel Assignment form — enter ch com p
> Enter values for processor channel 12
change communications-interface processor-channels...

Configuration 1: R8r  R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
66
>Submit the screen
End
Destination Node Name of the far-end node for this channel. This must be a 
name entered on the Node Names screen. For ppp 
connections, it must match the Destination Node Name 
entered on the ppp Data Module screen.
Destination Port A value of 0 allows any available interface channel on the 
destination node to be used for this connection. The...

Configuration 1: R8r  R8si 
67
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
Switch 2 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This 
screen is administered on Switch 2. A Node Names screen must be administered on 
each switch in the network. 
The node names and IP addresses in any network should be assigned in a logical and 
consistent manner from the point of view of the whole...

Configuration 1: R8r  R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
68
Switch 2 Task — Assign Link via ppp Data Module to Switch 1
This task administers a ppp data module on Switch 2 for the ppp connection to Switch 
1. The data module defines a network interface — it associates a link number with a 
port address and node name for the C-LAN port on Switch 2. It also specifies the 
node name for the destination node, which is a C-LAN...

Configuration 1: R8r  R8si 
69
Administration for Network Connectivity
555-233-504— Issue 1 — April 2000 CID: 77730
3  C-LAN Administration
>Press the ENTER/SAVE key to save and exit
End
COS
The values for these fields will be specified by the system 
administrator. COR:
TN:
BCC: This is a display-only field.
Node Name: The node name for the interface (C-LAN port) defined by this 
data module. This must be a name entered on the Node Names 
screen.
Subnet Mask:
Establish 
Connection?n means that the...

Configuration 1: R8r  R8si 3  C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
70
Switch 2 Task — Assign Processor Channels
This task associates data links (hardware) with processor channels (software) on 
Switch 2.
Begin
Steps
> Open the Processor Channel Assignment form — enter  ch com p
> Enter values
change communications-interface processor-channels
                                                                    Page 1 of X
PROCESSOR...