Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

System Printer and Report-Scheduler 
2-1 System Printer 
2
DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
2
System Printer and Report-Scheduler
System Printer
The system p rinter, rather than the slave p rinter attac hed  d irec tly to the 
manag ement terminal, is used  to sc hed ule rep orts to b e p rinted . However, when 
desired and on demand, you may print individual reports using the management 
terminal printer.
The Rep ort Sc hed uler feature...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-2 System Printer 
2
Screen 2-1. Feature Related System Parameters
NOTE:
The system p rinter must use an Elec tronic  Ind ustries Assoc iation (EIA) 
RS-232 async hronous serial interfac e. Dep end ing  up on the typ e/mod el of 
serial p rinter you use, you may have to administer c ertain hard ware op tion 
switc h setting s as p art of the installation p roc ed ure....

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-3 System Printer 
2
System Printer Data Link Operation
and Maintenance
Operation and  maintenanc e of the system p rinter d ata link is sig nific antly 
d ifferent from the CDR and  journal p rinter d ata links. For example, the CDR and  
journal p rinter d ata links are maintained  in a c onstant link up  state, while the 
system p rinter d ata link is only b roug ht...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-4 Report Scheduler 
2
It is assumed  all c ustomers monitor the op erating  status of the system p rinter 
and , as nec essary, refill the p ap er b in, relieve any pap er jams, verify the p rinter is 
receiving power, and so on.
NOTE:
The Basic  Call Management System (BCMS) log in c annot exec ute the 
busyout sp-link
 c ommand . This is normally only p erformed...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-5 Report Scheduler 
2
Adding a Report to the Report Scheduler
To add  a report to the Rep ort Sc hed uler, enter a list
, test
, or display 
c ommand  
followed  b y the schedule
 op tion. Whenever a rep ort is initially sc hed uled , the 
p rint interval of immediate
 is automatic ally assig ned as the d efault. Therefore, if 
immediate
 is not d esired , you must c...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-6 Report Scheduler 
2
Screen 2-3. Report Scheduler screen — Scheduled Print Interval  Print 
IntervalThis field  has three options: immediate
, deferred
, and  
scheduled
. The default is immediate
. 
Whenever the Print 
Interval field  is c hang ed  from immediate
 to deferred
 or 
scheduled
, the sc reen c hang es to the format d ep ic ted  in 
Screen 2-3
 and  the...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-7 Report Scheduler 
2
Other c ommand s, suc h as those d esc rib ed  in Chapter 3, ‘‘Traffic Data Analysis’’, 
are ad d ed  to the Rep ort Sc hed uler in a similar manner. Simp ly ap p end the 
schedule
 q ualifier to the c ommand  (for examp le, list aca-parameters schedule
) 
and , when the first sc reen ap pears, c hang e the Print Interval field  from 
immediate...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-8 Report Scheduler 
2
Command
To d isp lay a list of all rep orts on the Rep ort Sc hed uler:
1. Type list report-scheduler
 [print/schedule]
 and  p ress 
RETURN. 
Options: The print
 and  schedule
 op tions are availab le for this c ommand .
Screen 2-4
 d ep ic ts the sc reen for the list report-scheduler
 c ommand . Table 2-3 
d esc rib es the d ata field s for...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-9 Report Scheduler 
2
All field s are disp lay-only. If, after reviewing  this rep ort, it is d etermined  c hang es 
need  to b e mad e, use the change report-scheduler
 c ommand  to make the 
desired changes. 
Table 2-3. Report Scheduler Screen
Field Description
Job Id
When a c ommand  is exec uted  with the schedule
 qualifier, 
the system resp onds b y g enerating...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
System Printer and Report-Scheduler 
2-10 Report Scheduler 
2
Change Command
Use the change report-scheduler
 c ommand  to c hang e the sc hed ule of a rep ort. 
To d isp lay this sc reen, use the change report-scheduler xx
 c ommand , where xx 
c orresp ond s to the Job  Id . Screen 2-5
 depicts the Change Report Scheduler 
sc reen. Table 2-4
 d esc ribes the d ata field s for this sc reen.
Screen 2-5....