Lucent Technologies DEFINITY® Enterprise Communication Server Release 8.2 Reports Guide

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-11 The Busiest-Interval Command 
4
4. Refer to the list measurements communications-links
 rep ort to 
d etermine if any of the links are rec eiving  an ab normal amount of traffic .
5. Chec k with the users to d etermine if a c ertain feature(s) is used  heavily 
d uring the id entified  time interval.
6. Refer the p rob lem to maintenanc e p ersonnel with the sug g estion...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-12 Processor Occupancy Busiest-Interval Measurements Report 
4
Screen 4-4. Processor Occupancy Busiest-Interval Measurements Report
NOTE:
The field s on this rep ort are the same as on the summary rep ort. However, 
the d ata is c alc ulated  over 3-minute intervals rather than 1-hour intervals.
Using the Busiest-Interval Report
to Resolve Problems
The following  list id...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-13 The Pktint Command 
4
After a serious p erformanc e p rob lem is d etec ted  and  c orrec ted, use the clear 
measurements occupancy busiest-intervals
 c ommand  and  c lear the log  of 
b usiest entries. This allows attention to b e foc used  on any c urrent performanc e 
problems.
NOTE:
Th e  clear measurements occupancy busiest-intervals
 c ommand should  
only b e used...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-14 Processor Occupancy Pktint Report 
4
Screen 4-5. Processor Occupancy Pktint Report
Table 4-2. Processor Occupancy Pktint Report
Field Description
Meas Hour
Measurement Hour. The starting  hour in whic h the 
measurements are taken.
PKT-INTN 
Occ
Packet-Interface Occupancy. Where N is either 1, 2, or 3, 
representing  eac h of the 3 PKT-INT b oard s. The perc ent 
oc c up...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-15 The Communications Links Command 
4
The Communications Links Command
This sec tion d esc rib es the Proc essor Oc c up anc y Communic ations Links 
command.
When to Use the Communications 
Links Command
The main func tion of the c ommunic ations links c ommand  is to:
nObtain a rep ort that fac ilitates the monitoring  of traffic  over the p roc essor 
interfac e links...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-16 Processor Occupancy Communications Link Measurements Report 
4
Screen
Screen 4-6 and Screen 4-7 show typ ic al outp ut for the Proc essor Oc c up anc y 
Communic ation Link Measurements rep ort. The time and  d ate the rep ort is 
requested displays at the top right. Table 4-3
 d esc rib es the data fields p resented  
in the Proc essor Oc c up anc y Communic ations Link...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-17 Processor Occupancy Communications Link Measurements Report 
4
The Proc essor Oc c up anc y Communic ation Link Measurements rep orts for eac h 
c ustomer ap p lic ation varies sig nific antly sinc e a p artic ular link on one switc h may 
serve a d ifferent func tion than the same link for another switc h. Furthermore, what 
is c onsid ered  to be normal link traffic  for...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-18 Mapping Links to Applications 
4
Mapping Links to Applications
Command
To see what ap p lic ations are running  on the links:
1. Type display communications-interface links 
and press 
RETU RN. 
Screen
Screen 4-8 shows typ ic al outp ut for the Proc essor Oc c up anc y Interfac e Links 
rep ort for the G3r, G3si and G3c si systems. Table 4-4
 describes the data fields 
p...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-19 Mapping Links to Applications 
4
Table 4-4. Processor Occupancy Interface Links report
Field Description
LinkA display-only field . Ind ic ates the interfac e link numb er that 
c onnec ts to another nod e in a DCS network, a Messag e 
Server, CMS, ISDN Gateway, or AUDIX. Interfac e Links always 
terminate on a p ort in a PGATE c irc uit pac k for R5r and  later 
c onfig...

DEFINITY Enterprise Communication Server Release 8.2
Reports Guide  555-233-505  Issue 1
April 2000
Processor Occupancy Reports 
4-20 Mapping Links to Applications 
4
Data Analysis Guidelines
The following guid elines are intend ed  to show an easy method  for determining  
whether c urrently rep orted  d ata is ac c ep tab le or not. These g uid elines represent 
the minimum you should  d o to verify the rec orded  measurement values are 
c onsistent with exp ec ted  and  historic  values. Perform ad d...