Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1307 Class of Restriction 
20
Interactions
nAAR/ARS
Originating FRLs are assigned via a COR. Termination and Miscellaneous 
Restrictions do not apply to ARS/AAR calls.
nAAR/ARS Partitioning
Partition Group Numbers are assigned via a COR.
nBridged Call Appearance
The COR assigned to a telephone’s primary extension also applies to calls 
originated from a bridged call appearance of that...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1308 Class of Restriction 
20
nTie-Trunk Access
Incoming dial-repeating tie-trunk calls can be completed directly to an 
inward-restricted or public-restricted extension but cannot be extended by 
an attendant to an inward-restricted telephone.
nTransfer
Incoming trunk calls cannot be transferred to an inward-restricted 
extension when a 3-way COR check is made.
Incoming trunk calls can be...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1309 Conference 
20
Do not assign fully restricted service to a station with the following features or 
conditions:
nAbbreviated Dialing
nBridged Call Appearance
nAttendant stations
nNight Service stations
nStations that are Call Coverage or Send All Calls points
nStations that are Call Forward destinations
nStations that are Call Pickup points
Interactions for miscellaneous terminal and...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1310 Conference 
20
nIf an analog single-line set has Call Wait active and creates a conference 
call, Call Wait is rendered inactive as long as the single-line set is on the 
call. For example, caller A on an analog set talks to caller B, flashes to talk 
to caller C, and flashes to conference B and C. Then, if caller D calls caller 
A, Call Wait is denied.
nUsers of DCP, Hybrid, and...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1311 Restriction — Controlled 
20
nTrunk-to-Trunk Transfer
When a multifunction telephone (BRI/Digital/Hybrid) dials sufficient 
digits to route a call, but could route differently if additional digits were 
dialed, the telephone does not recognize the Conference or Transfer 
buttons. The user must delay dialing for 3 seconds or dial # to indicate that 
the call can be routed based on the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1312 Restriction — Controlled 
20
nTermination — The telephone cannot receive any calls. Incoming calls are 
routed to the attendant, are redirected via Call Coverage, or receive 
intercept treatment.
nStation-to-Station — The telephone cannot place or receive 
station-to-station calls.
nToll — The telephone cannot place toll calls but can place free local calls.
NOTE:
Toll Restriction may be...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1313 Crisis Alert 
20
nUniform Call Distribution
Calls dialed through the UDP are not restricted by Outward Restriction.
Crisis Alert
Crisis Alert notifies designated extensions when an emergency call is made, and 
indicates the origin of the emergency call. This information allows the attendant 
or other user to direct emergency-service response to the caller.
When a user places an emergency...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1314 Crisis Alert 
20
NOTE:
The crisis alert call uses 2-4 trunks; 1 trunk for the actual call and 1-3 
trunks to notify the pager(s) depending on the number of 
administered pagers.
Information about the alert can be viewed on the history report printed at the 
journal printer and the emergency log.
Considerations
nOnly one crss-alert button is allowed per attendant console or digital...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1315 Dial Plan 
20
Dial Plan
This is the system’s guide to digit translation. When the system receives dialed 
digits, it must know what to expect next based on the digits received so far. For 
example, if a user dials 4, the system must know how many more digits to expect 
before the call is processed.
All feature access codes, extensions and trunk access codes must be consistent 
with the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Features and technical reference 
1316 Dial Plan 
20
nAlthough extensions with the same first digit can have different lengths, 
data-channel extensions must have the maximum number of digits to avoid 
timeout problems for data calls that the switch automatically sets up, for 
example, the Call Detail Recording (CDR) link.
nAn extension and a Feature Access Code (FAC) can share the same first 
digit only if the extension is...